Ändra sökning
Länk till posten
Permanent länk

Direktlänk
BETA
Alternativa namn
Publikationer (10 of 48) Visa alla publikationer
Schunnesson, H., Shekhar, G., Gustafson, A. & Johansson, D. (2019). A review of mining practices for surface support: an international survey. In: : . Paper presented at Ground Support 2019 (pp. 283-293). Sudbury, Canada
Öppna denna publikation i ny flik eller fönster >>A review of mining practices for surface support: an international survey
2019 (Engelska)Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

This paper reviews mining practices for surface support and identifies four key areas that need attention. An international survey was conducted as part of the Mining Initiative on Ground Support Systems and Equipment III project from 2017 to 2018. The survey used a standardised, web-based questionnaire adapted for personal computers and smartphones. The survey was distributed globally, with data collected from 58 underground mines with different mining conditions and challenges. The results highlight the challenges with regard to safety and automation of surface support for different rock conditions and the advantages and disadvantages of various machines (face drills versus mechanised dedicated bolters versus semi-mechanised bolters) used to install surface support. The survey also shows the ambiguity in the mining community with regard to productivity of mine support. This paper presents an approach for collecting technical data through an online tool, which is inexpensive and effective.

Ort, förlag, år, upplaga, sidor
Sudbury, Canada: , 2019
Nyckelord
surface support, mesh/screen installation, productivity, qualitative review, mine automation
Nationell ämneskategori
Teknik och teknologier Geoteknik
Forskningsämne
Gruv- och berganläggningsteknik
Identifikatorer
urn:nbn:se:ltu:diva-76799 (URN)978-0-9876389-4-6 (ISBN)
Konferens
Ground Support 2019
Tillgänglig från: 2019-11-21 Skapad: 2019-11-21 Senast uppdaterad: 2019-11-21
Navarro, J., Schunnesson, H., Ghosh, R., Segarra, P., Johansson, D. & Sanchidrián, J. Á. (2019). Application of drill-monitoring for chargeability assessment in sublevel caving. International Journal of Rock Mechanics And Mining Sciences, 119, 180-192
Öppna denna publikation i ny flik eller fönster >>Application of drill-monitoring for chargeability assessment in sublevel caving
Visa övriga...
2019 (Engelska)Ingår i: International Journal of Rock Mechanics And Mining Sciences, ISSN 1365-1609, E-ISSN 1873-4545, Vol. 119, s. 180-192Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Currently, the charging procedure for sublevel caving mining is carried out with no prior information of the rock mass condition. Thus, engineers are blindsided to unexpected rock conditions and ill-prepared to address issues associated with collapsing boreholes. This results on charging problems and, as consequence, bad fragmentation of the rock after blasting which difficult ore loading and transportation as the gravity flow of the rock is reduced.

This paper builds up the work done by Ghosh et al. (IJRMMS, 2018), to classify the geotechnical rock condition into five classes (solid rock, fractured rock, cave-in, minor and major cavity). From it, two applications based on the Measure While Drilling (MWD) technique have been developed: one for geotechnical rock condition of orebodies and the other for predicting the risk of collapse in boreholes. The work of Ghosh et al. has been improved into a geotechnical rock condition block model to simplify the quantitative assessment and automatic recognition of rock trends. A thorough correction of the MWD parameters has been also applied to minimize external influences other than the rock mass. From it, the risk of borehole collapses model has been developed by comparing different combinations of the geotechnical rock condition block-model with the charging length of 102 production fan-holes. The assessment of the number of collapsed and non-collapsed blastholes and the charging length/blasthole length ratio has been used to assign high, medium or low risk of collapse to each combination. The results predict collapses in the first half of the fan-holes for the high risk, collapses in the second half of the fan-hole for the medium risk and no collapses along the hole for the non-risk holes. The two models have been applied in large scale for two orebodies in the Malmberget mine, Sweden, which comprises 20 drifts and 5060 fan shape long-holes.

Ort, förlag, år, upplaga, sidor
Elsevier, 2019
Nyckelord
Rock mass condition, Underground blasting, Measurement while drilling (MWD), Block model, Explosives
Nationell ämneskategori
Annan samhällsbyggnadsteknik
Forskningsämne
Gruv- och berganläggningsteknik
Identifikatorer
urn:nbn:se:ltu:diva-74969 (URN)10.1016/j.ijrmms.2019.03.026 (DOI)000472023100018 ()2-s2.0-85065716586 (Scopus ID)
Anmärkning

Validerad;2019;Nivå 2;2019-06-25 (johcin)

Tillgänglig från: 2019-06-25 Skapad: 2019-06-25 Senast uppdaterad: 2019-07-10Bibliografiskt granskad
van Eldert, J., Schunnesson, H., Johansson, D. & Saiang, D. (2019). Application of Measurement While Drilling Technology to Predict Rock Mass Quality and Rock Support for Tunnelling. Rock Mechanics and Rock Engineering
Öppna denna publikation i ny flik eller fönster >>Application of Measurement While Drilling Technology to Predict Rock Mass Quality and Rock Support for Tunnelling
2019 (Engelska)Ingår i: Rock Mechanics and Rock Engineering, ISSN 0723-2632, E-ISSN 1434-453XArtikel i tidskrift (Refereegranskat) Epub ahead of print
Abstract [en]

A tunnelling project is normally initiated with a site investigation to determine the in situ rock mass conditions and to generate the basis for the tunnel design and rock support. However, since site investigations often are based on limited information (surface mapping, geophysical profiles, few bore holes, etc.), the estimation of the rock mass conditions may contain inaccuracies, resulting in underestimating the required rock support. The study hypothesised that these inaccuracies could be reduced using Measurement While Drilling (MWD) technology to assist in the decision-making process. A case study of two tunnels in the Stockholm bypass found the rock mass quality was severely overestimated by the site investigation; more than 45% of the investigated sections had a lower rock mass quality than expected. MWD data were recorded in 25 m grout holes and 6 m blast holes. The MWD data were normalised so that the long grout holes with larger hole diameters and the shorter blast holes with smaller hole diameters gave similar results. With normalised MWD data, it was possible to mimic the tunnel contour mapping; results showed good correlation with mapped Q-value and installed rock support. MWD technology can improve the accuracy of forecasting the rock mass ahead of the face. It can bridge the information gap between the early, somewhat uncertain geotechnical site investigation and the geological mapping done after excavation to optimise rock support.

Ort, förlag, år, upplaga, sidor
Springer, 2019
Nyckelord
Measurement while drilling (MWD), Rock mass investigation, Tunnelling, Rock mass quality, Rock support, Drill and blast technology
Nationell ämneskategori
Mineral- och gruvteknik Infrastrukturteknik Byggproduktion Geoteknik Annan samhällsbyggnadsteknik
Forskningsämne
Gruv- och berganläggningsteknik
Identifikatorer
urn:nbn:se:ltu:diva-76382 (URN)10.1007/s00603-019-01979-2 (DOI)000489294700001 ()
Forskningsfinansiär
Stiftelsen Bergteknisk Forskning (BeFo), 344
Tillgänglig från: 2019-10-14 Skapad: 2019-10-14 Senast uppdaterad: 2019-10-28
Ittner, H., Olsson, M., Johansson, D. & Schunnesson, H. (2019). Multivariate evaluation of blast damage from emulsion explosives in tunnels excavated in crystalline rock. Tunnelling and Underground Space Technology, 85, 331-339
Öppna denna publikation i ny flik eller fönster >>Multivariate evaluation of blast damage from emulsion explosives in tunnels excavated in crystalline rock
2019 (Engelska)Ingår i: Tunnelling and Underground Space Technology, ISSN 0886-7798, E-ISSN 1878-4364, Vol. 85, s. 331-339Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Blast damage in tunnels is usually regulated in Swedish infrastructure contracts as it can influence the quality and lifecycle cost for tunneling projects. The topic is important for underground constructions with a long operation period such as tunnels for public transport, permanent access tunnels in mines or underground repositories for nuclear waste. This paper aims to evaluate the influence of design and geology variables on the resulting blast fracture length and frequency by means of multivariate data analysis. The analysis was based on data from five field investigations carried out at tunnel sites in Sweden and Finland where emulsion explosives were used. Data was compiled and analyzed using Principal Component Analysis (PCA). Charge concentration was found to be the most influential design variable and hole spacing had limited influence on blast fracturing. Results from the PCA suggest that blast fractures length could be dependent also on geology and natural fractures. Three main groups of fracture patterns were identified, one group with relatively few and short blast fractures, a group with several longer blast fractures and a group with few or a single long blast fracture. The result shows differences in fracture length between the column and bottom charge part of the contour holes, with blast fracture lengths up to approx. 40 cm for the column charge and up to approx. 60 cm for the bottom charge.

Ort, förlag, år, upplaga, sidor
Elsevier, 2019
Nyckelord
Blasting, Blast damage, Emulsion explosives, Mechanized charging, Principal Component Analysis
Nationell ämneskategori
Geoteknik
Forskningsämne
Gruv- och berganläggningsteknik
Identifikatorer
urn:nbn:se:ltu:diva-67454 (URN)10.1016/j.tust.2018.12.021 (DOI)000457512000031 ()2-s2.0-85059473074 (Scopus ID)
Forskningsfinansiär
Stiftelsen Bergteknisk Forskning (BeFo)
Anmärkning

Validerad;2019;Nivå 2;2019-01-10 (svasva)

Tillgänglig från: 2018-02-01 Skapad: 2018-02-01 Senast uppdaterad: 2019-04-23Bibliografiskt granskad
Yi, C., Johansson, D., Schunnesson, H. & Åhlin, H. (2019). Numerical study of the impact of joints on rock fragmentation by blasting. In: : . Paper presented at EFEE 10th World Conference on Explosives and Blasting.
Öppna denna publikation i ny flik eller fönster >>Numerical study of the impact of joints on rock fragmentation by blasting
2019 (Engelska)Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Rock masses consist essentially of intact rock and discontinuities such as joints. Blasting is mostly used method for the rock excavation. To investigate the effects of joints on the fragmentation by blasting, three models with different joint patterns and one model without joint were created in the LS-DYNA code. In these models, a bonded particle model was used to represent the rock to be blasted, a finite element model was adopted to model the remaining rock mass and a particle blast model was employed to describe the detonation of explosives. To validate the contact model for joints, the fragmentation pattern and the individual particle motion from two single borehole shot models with and without joints were compared. The numerical results indicated that the existence of joints has a significant effect on fragmentation and vibration. The models with joints produced finer fragmentation compared to the model without joints in the paper. 

Nyckelord
blasting, joints, fragmentation
Nationell ämneskategori
Geoteknik
Identifikatorer
urn:nbn:se:ltu:diva-76089 (URN)978-0-9550290-6-6 (ISBN)
Konferens
EFEE 10th World Conference on Explosives and Blasting
Tillgänglig från: 2019-09-23 Skapad: 2019-09-23 Senast uppdaterad: 2019-12-17
Johansson, D., Nyberg, U., Stenman, U. & Schunnesson, H. (2019). Shock front curvature measurements of emulsion explosives. In: Roger Holmberg (Ed.), Proceedings of the 10th EFEE: . Paper presented at Helsinki Conference Proceedings 2019.
Öppna denna publikation i ny flik eller fönster >>Shock front curvature measurements of emulsion explosives
2019 (Engelska)Ingår i: Proceedings of the 10th EFEE / [ed] Roger Holmberg, 2019Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

This paper will discuss a suggested methodology and data collection carried out within the EU-project SLIM    (Sustainable Low Impact solution for exploitation of small Mineral deposits based on advanced rock blasting and environmental technologies). The field work took place during 2017 at a test site near Stockholm, Sweden. This paper suggest a method measure the detonation front curvature and the velocity of detonation of explosives. The purpose for this is to increase the understanding of the detonation properties of emulsion explosives as used in many blasting operations around the world. In this study, the key parameters of the performance of the emulsion explosive are its non-ideal detonation front curvature and its velocity of detonation (VOD). The charge diameters have been varied Ø25mm up to Ø65 mm i.e. from nearly critical diameters for a steady detonation up to diameters used in mining/quarrying and tunneling. The suggested methodology also introduce a heavy and thick walled mortar as a confiner for the explosive. This to simulate similar conditions as in blasting in rock. Additional to the proposed methodology and set-up, a scheme to analyze and evaluate the measurements is also proposed.

Nationell ämneskategori
Mineral- och gruvteknik
Forskningsämne
Gruv- och berganläggningsteknik
Identifikatorer
urn:nbn:se:ltu:diva-76528 (URN)978-0-9550290-6-6 (ISBN)
Konferens
Helsinki Conference Proceedings 2019
Tillgänglig från: 2019-10-28 Skapad: 2019-10-28 Senast uppdaterad: 2019-11-27
Yi, C., Nyberg, U. & Johansson, D. (2018). Calibration and Validation of Reactive Flow Model Parameters for an emulsion explosive. In: : . Paper presented at 12th International Symposium on Rock Fragmentation by Blasting, Fragblast 12, Luleå, Sweden on June 9-15.
Öppna denna publikation i ny flik eller fönster >>Calibration and Validation of Reactive Flow Model Parameters for an emulsion explosive
2018 (Engelska)Konferensbidrag, Publicerat paper (Refereegranskat)
Nationell ämneskategori
Teknik och teknologier Annan samhällsbyggnadsteknik
Forskningsämne
Gruv- och berganläggningsteknik
Identifikatorer
urn:nbn:se:ltu:diva-69773 (URN)
Konferens
12th International Symposium on Rock Fragmentation by Blasting, Fragblast 12, Luleå, Sweden on June 9-15
Tillgänglig från: 2018-06-21 Skapad: 2018-06-21 Senast uppdaterad: 2018-06-27
Petropoulos, N., Wimmer, M., Johansson, D. & Nordlund, E. (2018). Compaction of confining materials in pillar blast tests. Rock Mechanics and Rock Engineering, 51(6), 1907-1919
Öppna denna publikation i ny flik eller fönster >>Compaction of confining materials in pillar blast tests
2018 (Engelska)Ingår i: Rock Mechanics and Rock Engineering, ISSN 0723-2632, E-ISSN 1434-453X, Vol. 51, nr 6, s. 1907-1919Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Two confined pillar tests were conducted at the Kiirunavaara mine to investigate the degree of compaction of three materials, i.e., 0–32-mm backfilled material, a blend of ore and waste material and caved material. Two blastholes were drilled parallel to each pillar wall, and several measurement holes were drilled in between the blastholes through each pillar. Both the measurement holes and backfilled materials, except the caved material, were instrumented. Two types of measurements were taken: dynamic measurements with accelerometers, and static measurements which considered the location of the instrumentation pre- and post-blast. Dynamic measurements involved the burden movement and the confining material behavior, and static measurements contained the final location of sensors inside and the angle of repose of the confining material. The results showed that the size distribution of the confining material affects its behavior under dynamic loading. The backfilled materials showed an apparent cohesion forming an agglomeration on the surface of the blasted burden. The burden moved as one slab due to simultaneous detonation. A gap was formed between the blasted burden and the new face. This gap was partially filled with burden erosion material which was finer fragmented than the blasted burden material.

Ort, förlag, år, upplaga, sidor
Springer, 2018
Nyckelord
Compaction, burden movement, pillar tests, sublevel caving, confined blasting
Nationell ämneskategori
Mineral- och gruvteknik Annan samhällsbyggnadsteknik
Forskningsämne
Gruv- och berganläggningsteknik
Identifikatorer
urn:nbn:se:ltu:diva-67850 (URN)10.1007/s00603-018-1447-8 (DOI)000433195900016 ()2-s2.0-85047517598 (Scopus ID)
Projekt
Improved understanding of sublevel blasting – Determination of the extent of the compacted zone, its properties and the effects on caving
Anmärkning

Validerad;2018;Nivå 2;2018-06-01 (rokbeg)

Tillgänglig från: 2018-03-06 Skapad: 2018-03-06 Senast uppdaterad: 2018-08-27Bibliografiskt granskad
Yi, C., Johansson, D. & Greberg, J. (2018). Effects of in-situ stresses on the fracturing of rock by blasting. Computers and geotechnics, 104, 321-330
Öppna denna publikation i ny flik eller fönster >>Effects of in-situ stresses on the fracturing of rock by blasting
2018 (Engelska)Ingår i: Computers and geotechnics, ISSN 0266-352X, E-ISSN 1873-7633, Vol. 104, s. 321-330Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Blasting is widely applied in deep rock excavation. The effect of in-situ stresses on the fracturing of rock due to blasting was investigated. A theoretical model was used to explain the effect mechanism of in-situ stresses on crack propagation due to blasting. Four cases with different in-situ stress conditions were numerically investigated. The numerical results indicate that the crack propagation is governed by the blast load in the vicinity of the blasthole while the high in-situ stresses can influence the crack propagation in the far-field. The crack propagation trends towards the direction in which the high initial pressure is applied.

Ort, förlag, år, upplaga, sidor
Elsevier, 2018
Nyckelord
Blasting, In-situ stresses, Crack propagation
Nationell ämneskategori
Annan samhällsbyggnadsteknik
Forskningsämne
Gruv- och berganläggningsteknik; Centrumbildning - Kompetenscentrum för sprängteknik (SWEBREC)
Identifikatorer
urn:nbn:se:ltu:diva-67060 (URN)10.1016/j.compgeo.2017.12.004 (DOI)000449125200029 ()2-s2.0-85038407140 (Scopus ID)
Anmärkning

Validerad;2018;Nivå 2;2018-11-19 (johcin)

Tillgänglig från: 2017-12-19 Skapad: 2017-12-19 Senast uppdaterad: 2019-03-26Bibliografiskt granskad
Yi, C., Johansson, D. & Nyberg, U. (2018). Numerical investigation for timing effects on fragmentation based on a coupled FEM-BPM-PBM model. In: : . Paper presented at 12th International Symposium on Rock Fragmentation by Blasting, Fragblast 12, Luleå, Sweden on June 9-15, 2018.
Öppna denna publikation i ny flik eller fönster >>Numerical investigation for timing effects on fragmentation based on a coupled FEM-BPM-PBM model
2018 (Engelska)Konferensbidrag, Publicerat paper (Refereegranskat)
Nationell ämneskategori
Teknik och teknologier Annan samhällsbyggnadsteknik
Forskningsämne
Gruv- och berganläggningsteknik
Identifikatorer
urn:nbn:se:ltu:diva-69770 (URN)
Konferens
12th International Symposium on Rock Fragmentation by Blasting, Fragblast 12, Luleå, Sweden on June 9-15, 2018
Tillgänglig från: 2018-06-21 Skapad: 2018-06-21 Senast uppdaterad: 2018-06-27
Organisationer
Identifikatorer
ORCID-id: ORCID iD iconorcid.org/0000-0002-5165-4229

Sök vidare i DiVA

Visa alla publikationer