Change search
Link to record
Permanent link

Direct link
BETA
Lundin, Michael
Publications (9 of 9) Show all publications
Lundin, M., Lejon, E., Dagman, A. & Näsström, M. (2017). Efficient design module capture and representation for product family reuse. Journal of Computing and Information Science in Engineering, 17(3), Article ID 031002.
Open this publication in new window or tab >>Efficient design module capture and representation for product family reuse
2017 (English)In: Journal of Computing and Information Science in Engineering, ISSN 1530-9827, E-ISSN 1944-7078, Vol. 17, no 3, article id 031002Article in journal (Refereed) Published
Abstract [en]

New business models and more integrated product development processes require designers to make use of knowledge more efficiently. Capture and reuse are means of coping, but support, techniques, and mechanisms have yet to be sufficiently addressed. This paper consequently explores how computer-aided technologies (CAx) and a computer-aided design (CAD) model-oriented approach can be used to improve the efficiency of design module capture and representation for product family reuse. The first contribution of this paper is the investigation performed at a Swedish manufacturing company and a set of identified challenges related to design capture and representation for reuse in product family development. The second contribution is a demonstrated and evaluated set of systems and tools, which exemplifies how these challenges can be approached. Efficient design capture is achieved by a combination of automated and simplified design capture, derived from the design implementation (CAD model definition) to the extent possible. Different design representations can then be accessed by the designer using the CAD-internal tool interface. A web application is an example of more generalpurpose representation to tailor design content, all of which is managed by a product lifecycle management (PLM) system. Design capture is based on a modular view block definition, stored in formal information models, management by a PLM system, for consistent and reliable design content. It was, however, introduced to support the rich and expressive forms of capture and representation required to facilitate understanding, use, and reuse of varied and increasingly complex designs. A key element in being able to describe a complex design and its implementation has been capture and representation of a set of design states. The solution has been demonstrated to effectively be able to capture and represent significant portions of a step-by-step design training material and the implementation of complex design module through a set of design decisions taken. The validity and relevance of the proposed solution is strengthened by the level of acceptance and perceived value from experienced users, together with the fact that the company is implementing parts of it today

Place, publisher, year, edition, pages
The American Society of Mechanical Engineers (ASME), 2017
National Category
Other Mechanical Engineering
Research subject
Computer Aided Design
Identifiers
urn:nbn:se:ltu:diva-62265 (URN)10.1115/1.4035673 (DOI)000407334400002 ()2-s2.0-85013347506 (Scopus ID)
Note

Validerad; 2017; Nivå 2; 2017-03-02 (andbra)

Available from: 2017-03-02 Created: 2017-03-02 Last updated: 2018-11-27Bibliographically approved
Lundin, M. (2015). Computer-Aided Product Development: Using Computer-Aided Technologies for Efficient Design Capture and Representation for Reuse (ed.). (Doctoral dissertation). Paper presented at . : Luleå tekniska universitet
Open this publication in new window or tab >>Computer-Aided Product Development: Using Computer-Aided Technologies for Efficient Design Capture and Representation for Reuse
2015 (English)Doctoral thesis, comprehensive summary (Other academic)
Place, publisher, year, edition, pages
Luleå tekniska universitet, 2015
Series
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
National Category
Other Mechanical Engineering
Research subject
Computer Aided Design
Identifiers
urn:nbn:se:ltu:diva-18243 (URN)7956d746-fd3f-442a-9d7c-82386d2c01b2 (Local ID)978-91-7583-272-2 (ISBN)978-91-7583-273-9 (ISBN)7956d746-fd3f-442a-9d7c-82386d2c01b2 (Archive number)7956d746-fd3f-442a-9d7c-82386d2c01b2 (OAI)
Note
Godkänd; 2015; 20150303 (miclun); Nedanstående person kommer att disputera för avläggande av teknologie doktorsexamen. Namn: Michael Lundin Ämne: Datorstödd maskinkonstruktion/Computer Aided Design Avhandling: Computer-Aided Product Development Using Computer-Aided Technologies for Efficient Design Capture and Representation for Reuse Opponent: Professor Fredrik Elgh, Avd för produktutveckling, Tekniska högskolan i Jönköping Ordförande: Bitr professor Mats Näsström, Avd för produkt- och produktionsutveckling Institutionen för teknikvetenskap och matematik, Luleå tekniska universitet Tid: Onsdag 29 april kl 09.00 Plats: E632, Luleå tekniska universitetAvailable from: 2016-09-29 Created: 2016-09-29 Last updated: 2017-11-24Bibliographically approved
Lejon, E., Lundin, M., Dagman, A., Jeppsson, P. & Näsström, M. (2015). Integrated Capture and Representation of Product Information In Computer-Aided Product Development (ed.). In: (Ed.), ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: August 2-5, 2015, Boston, Massachusetts, USA.. Paper presented at ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference : 02/08/2015 - 05/08/2015. New York: American Society of Mechanical Engineers, 1B, Article ID DETC2015-47299.
Open this publication in new window or tab >>Integrated Capture and Representation of Product Information In Computer-Aided Product Development
Show others...
2015 (English)In: ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: August 2-5, 2015, Boston, Massachusetts, USA., New York: American Society of Mechanical Engineers , 2015, Vol. 1B, article id DETC2015-47299Conference paper, Published paper (Refereed)
Abstract [en]

This paper features the implementation and evaluation of a proposed approach for information capture and representation integrated into the existing design environments at two manufacturing companies. A tool has been developed that automatically derives information from the CAD system during design and provides users with the means to capture product information that has previously been documented outside of the CAD system. Product information is managed in a PLM data model and becomes, once stored, the foundation for providing tailored views of information.Feedback from the evaluation shows that the prescribed approach was preferred to the current one and that it would likely provide value to users, both authors and consumers, of product information. This approach can reduce the time required to capture the pertinent product information. However, the primary savings are likely to be indirect as a result of increased consistency, understanding, and the potential (re)use of product information.The approach and tools presented constitute another step toward providing each stakeholder with more efficient, intuitive, contextual, and purposeful support for information capture and representation in computer-aided product development.

Place, publisher, year, edition, pages
New York: American Society of Mechanical Engineers, 2015
National Category
Other Mechanical Engineering
Research subject
Computer Aided Design; Centre - The Faste Laboratory
Identifiers
urn:nbn:se:ltu:diva-32782 (URN)10.1115/DETC2015-47299 (DOI)2-s2.0-84978952318 (Scopus ID)761ff40e-489b-41ef-842e-3a8f014da90f (Local ID)978-0-7918-5705-2 (ISBN)761ff40e-489b-41ef-842e-3a8f014da90f (Archive number)761ff40e-489b-41ef-842e-3a8f014da90f (OAI)
Conference
ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference : 02/08/2015 - 05/08/2015
Projects
Fastelaboratoriet - VINNEXC
Note

Validerad; 2016; Nivå 1; 20150911 (erilej)

Available from: 2016-09-30 Created: 2016-09-30 Last updated: 2019-03-29Bibliographically approved
Lundin, M., Lejon, E., Dagman, A., Näsström, M. & Jeppsson, P. (2014). An Empirical Study Of Information Exchange And Design Support In Product Family Development (ed.). In: (Ed.), (Ed.), Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: . Paper presented at ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference : 17/08/2014 - 21/08/2014. New York: American Society of Mechanical Engineers, Article ID DETC2014-34940.
Open this publication in new window or tab >>An Empirical Study Of Information Exchange And Design Support In Product Family Development
Show others...
2014 (English)In: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, New York: American Society of Mechanical Engineers , 2014, article id DETC2014-34940Conference paper, Published paper (Refereed)
Place, publisher, year, edition, pages
New York: American Society of Mechanical Engineers, 2014
National Category
Other Mechanical Engineering
Research subject
Computer Aided Design
Identifiers
urn:nbn:se:ltu:diva-32975 (URN)7accc6b6-cc55-4474-bc8e-93ee12909f4a (Local ID)7accc6b6-cc55-4474-bc8e-93ee12909f4a (Archive number)7accc6b6-cc55-4474-bc8e-93ee12909f4a (OAI)
Conference
ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference : 17/08/2014 - 21/08/2014
Projects
Fastelaboratoriet - VINNEXC
Note
Godkänd; 2014; 20140513 (anddag)Available from: 2016-09-30 Created: 2016-09-30 Last updated: 2018-05-09Bibliographically approved
Lejon, E., Lundin, M., Jeppsson, P. & Näsström, M. (2013). Integrating information in product development (ed.). In: (Ed.), Andrew Y. C. Nee; Bin Song; Soh-Khim Ong (Ed.), Re-engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013. Paper presented at CIRP International Conference on Life Cycle Engineering : 17/05/2012 - 19/05/2012 (pp. 93-98). Singapore: Springer Singapore
Open this publication in new window or tab >>Integrating information in product development
2013 (English)In: Re-engineering Manufacturing for Sustainability: Proceedings of the 20th CIRP International Conference on Life Cycle Engineering, Singapore 17-19 April, 2013 / [ed] Andrew Y. C. Nee; Bin Song; Soh-Khim Ong, Singapore: Springer Singapore , 2013, p. 93-98Conference paper, Published paper (Refereed)
Abstract [en]

The amount of product and process related information in the engineering industry is large and constantly growing. Methods and tools are therefore needed to effectively leverage the information, ensuring that it is readily available, contextually understandable and usable for the activity at hand. This paper presents findings from two cases performed at manufacturing companies and an approach for how information effectively can be utilized during the development and lifecycle of a product. The approach primarily addresses the lack of up-to-date information, free of redundancies and accessible from the context where it is needed or will be captured.

Place, publisher, year, edition, pages
Singapore: Springer Singapore, 2013
National Category
Other Mechanical Engineering
Research subject
Computer Aided Design
Identifiers
urn:nbn:se:ltu:diva-30327 (URN)10.1007/978-981-4451-48-2_15 (DOI)41728f6d-d160-4c99-8532-8148bafa8175 (Local ID)978-981-4451-47-5 (ISBN)978-981-4451-48-2 (ISBN)41728f6d-d160-4c99-8532-8148bafa8175 (Archive number)41728f6d-d160-4c99-8532-8148bafa8175 (OAI)
Conference
CIRP International Conference on Life Cycle Engineering : 17/05/2012 - 19/05/2012
Projects
Fastelaboratoriet - VINNEXC
Note
Godkänd; 2013; 20130508 (erilej)Available from: 2016-09-30 Created: 2016-09-30 Last updated: 2018-05-09Bibliographically approved
Karlberg, M., Löfstrand, M., Sandberg, S. & Lundin, M. (2013). State of the art in simulation driven design (ed.). Paper presented at . International Journal of Product Development, 18(1), 68-87
Open this publication in new window or tab >>State of the art in simulation driven design
2013 (English)In: International Journal of Product Development, ISSN 1477-9056, E-ISSN 1741-8178, Vol. 18, no 1, p. 68-87Article in journal (Refereed) Published
Abstract [en]

During the last few decades, and in order to increase product development efficiency, simulations strategies have been developed to guide designers towards better solutions rather than to verify suggested and basically unevaluated solutions. Such approaches are often called Simulation Driven Design (SDD), which is of interest in this review. The objective of this paper is to show the research evolution of SDD and identify the state of the art in SDD methodology. The literature review comprises several hundred references, of which 79 are included in this paper. The results comprise the state of the art in simulation driven design including the history, various definitions, criteria and effects of using SDD approaches.

Keywords
Technology - Engineering physics, Fasteass, Teknikvetenskap - Teknisk fysik
National Category
Other Mechanical Engineering
Research subject
Computer Aided Design
Identifiers
urn:nbn:se:ltu:diva-2702 (URN)10.1504/IJPD.2013.052166 (DOI)2-s2.0-84874486761 (Scopus ID)0614a1bd-dc38-4a65-aaff-fb8da8403dd6 (Local ID)0614a1bd-dc38-4a65-aaff-fb8da8403dd6 (Archive number)0614a1bd-dc38-4a65-aaff-fb8da8403dd6 (OAI)
Note
Validerad; 2013; 20120803 (magkar)Available from: 2016-09-29 Created: 2016-09-29 Last updated: 2018-07-10Bibliographically approved
Sandberg, S., Lundin, M., Näsström, M., Lindgren, L.-E. & Berglund, D. (2013). Supporting engineering decisions through contextual, model-oriented communication and knowledge-based engineering in simulation driven product development: an automotive case study (ed.). Paper presented at . Journal of engineering design (Print), 24(1), 45-63
Open this publication in new window or tab >>Supporting engineering decisions through contextual, model-oriented communication and knowledge-based engineering in simulation driven product development: an automotive case study
Show others...
2013 (English)In: Journal of engineering design (Print), ISSN 0954-4828, E-ISSN 1466-1837, Vol. 24, no 1, p. 45-63Article in journal (Refereed) Published
Abstract [en]

Modern manufacturers rely increasingly on overlapping activities and frequent, bilateral exchange of preliminary information, adding to the complexity of information exchange and general reuse. The approach presented in this paper relies on a reuse process, embedded in the design environment already used, to avoid disrupting the design process and to increase the foundation upon which decisions are made. The proposed approach relies on Knowledge Based Extensions to commercial CAE systems and 3D CAE models to enable and ensure Simulation Driven Design capabilities and contextual communication within the early stages of product development. The approach has been shown to increase the simulation-driven capabilities in a business-to-business scenario, and in extension, increase the foundation upon which decisions are made and the likelihood of reaching a feasible and optimal final design. In conclusion, a simulation-driven design approach to product development has to be more than enabled to truly make a difference in the development process. Investigation and evaluations show that supporting tools and relevant information must be made readily available, intuitive, integrated into the environment where they are needed and, ultimately, be perceived as a natural part of daily development in order for them to be accepted and used.

National Category
Other Mechanical Engineering Other Materials Engineering
Research subject
Computer Aided Design; Material Mechanics
Identifiers
urn:nbn:se:ltu:diva-6903 (URN)10.1080/09544828.2012.697133 (DOI)000312595900003 ()2-s2.0-84871515998 (Scopus ID)53c04d75-5438-4eac-96b2-f7a78faa17a6 (Local ID)53c04d75-5438-4eac-96b2-f7a78faa17a6 (Archive number)53c04d75-5438-4eac-96b2-f7a78faa17a6 (OAI)
Note
Validerad; 2013; 20120814 (miclun)Available from: 2016-09-29 Created: 2016-09-29 Last updated: 2018-07-10Bibliographically approved
Lundin, M. (2012). Knowledge retention and reuse: supporting engineering decisions in simulation-driven product development (ed.). (Licentiate dissertation). Paper presented at . Luleå: Luleå tekniska universitet
Open this publication in new window or tab >>Knowledge retention and reuse: supporting engineering decisions in simulation-driven product development
2012 (English)Licentiate thesis, comprehensive summary (Other academic)
Abstract [en]

Information exchange is becoming more and more important as modern manufacturers increasingly rely on integrated product development. Research shows that designers may not be aware of existing information or be willing to disrupt their work to search for the relevant information. One part of the answer to issues related to understanding, availability and actual consideration is context. The research trend in knowledge sharing seems to be moving towards integration of additional platform-independent applications and lightweight product representations to accommodate contextual communication, even though findings suggest user reservation to additional applications. The part Computer Aided Design and Engineering systems play in the product lifecycle however continues to expand, as is the concept of Simulation-Driven Design as a means of ensuring downstream product lifecycle consideration. The underlying purpose of the research presented in this thesis is essentially to, enable and ensure awareness, access and understanding of product and process related information, for relevant actors, during relevant activities and within relevant environments.The proposed approach serves to enable, and to an extent ensure, contextual decision support within the early stages of product development, thus increasing the foundation for continued understanding and overall development. The approach has been implemented, and the resulting demonstrator includes but a few examples of how heavyweight technologies can, and to an extent should be used to ensure a better foundation for design decisions. The presented approach is a general way of not only enabling Simulation-Driven Design capabilities, but ensuring that they in fact have the desired impact. Investigations and demonstrator evaluations show that access to supporting tools and relevant information has to be made readily and contextually available. These have to be intuitive, integrated into the environment where they are needed, and ultimately be perceived as a natural part of daily development in order for them to be accepted and used. It is important to realise that the tools themselves are no cure-alls, nor are they replacements for purposeful communication and conscious consideration to all aspects of the product lifecycle. Still, transparency and an educational approach to tool development could be a catalyst, an entry point towards ensuring insight and understanding, so that each actor in turn can act with consideration to the product lifecycle as a whole, instead of just the task at hand.

Place, publisher, year, edition, pages
Luleå: Luleå tekniska universitet, 2012
Series
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757
National Category
Other Mechanical Engineering
Research subject
Computer Aided Design
Identifiers
urn:nbn:se:ltu:diva-26539 (URN)ec50083a-c1a3-4c59-bfba-fdcad57ef776 (Local ID)978-91-7439-445-0 (ISBN)ec50083a-c1a3-4c59-bfba-fdcad57ef776 (Archive number)ec50083a-c1a3-4c59-bfba-fdcad57ef776 (OAI)
Note
Godkänd; 2012; 20120507 (miclun); LICENTIATSEMINARIUM Ämnesområde: Datorstödd maskinkonstruktion/Computer Aided Design Examinator: Docent Mats Näsström, Institutionen för teknikvetenskap och matematik, Luleå tekniska universitet Diskutant: Teknisk doktor Martin Helgoson, AB Sandvik Coromant Tid: Torsdag den 14 juni 2012 kl 10.00 Plats: E231, Luleå tekniska universitetAvailable from: 2016-09-30 Created: 2016-09-30 Last updated: 2017-11-24Bibliographically approved
Lundin, M., Sandberg, S. & Näsström, M. (2010). Knowledge retention and reuse: using CAD models as carriers of knowledge in product development (ed.). In: (Ed.), (Ed.), Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference: presented at ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 15 - 18, 2010, Montreal, Quebec, Canada. Paper presented at ASME International Design Engineering Technical Conferences : 15/08/2010 - 18/08/2010 (pp. 1173-1182). New York: American Society of Mechanical Engineers, 3 : 30th Computers and Information in Engineering Conference, Parts A and B
Open this publication in new window or tab >>Knowledge retention and reuse: using CAD models as carriers of knowledge in product development
2010 (English)In: Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference: presented at ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, August 15 - 18, 2010, Montreal, Quebec, Canada, New York: American Society of Mechanical Engineers , 2010, Vol. 3 : 30th Computers and Information in Engineering Conference, Parts A and B, p. 1173-1182Conference paper, Published paper (Refereed)
Abstract [en]

In order to ensure competitive advantage, manufacturers need to reduce the time and resources spent on development without affecting the quality and performance of the final product. Studies show that designers are likely to change both job and company several times during their career. The loss of experience and expertise implies that new methods for efficient knowledge retention and reuse need to be developed. Results presented in this paper include development and implementation of a previously proposed method suggesting the use of CAD models as carriers of knowledge. The method has been further developed and realised in a three-part demonstrator, each part addressing one aspect of a holistic approach to efficient knowledge retention and reuse. The approach presented here does not require the use of any additional applications during product development and it ensures that the designer has access to necessary information, where and when it is needed. This approach also results in less time spent on documentation, data conversion and information retrieval.

Place, publisher, year, edition, pages
New York: American Society of Mechanical Engineers, 2010
Keywords
Computer Aided Design, Product Development, Knowlede Sharing, Knowledge Management, Knowledge Based Engineering, Engineering mechanics - Construction engineering, Teknisk mekanik - Konstruktionsteknik
National Category
Other Mechanical Engineering
Research subject
Computer Aided Design
Identifiers
urn:nbn:se:ltu:diva-37147 (URN)10.1115/DETC2010-28711 (DOI)2-s2.0-80054983538 (Scopus ID)b12bd660-cd42-11df-a707-000ea68e967b (Local ID)978-0-7918-4411-3 (ISBN)b12bd660-cd42-11df-a707-000ea68e967b (Archive number)b12bd660-cd42-11df-a707-000ea68e967b (OAI)
Conference
ASME International Design Engineering Technical Conferences : 15/08/2010 - 18/08/2010
Projects
Fastelaboratoriet - VINNEXC
Note
Godkänd; 2010; 20101001 (snd)Available from: 2016-10-03 Created: 2016-10-03 Last updated: 2018-07-10Bibliographically approved
Organisations

Search in DiVA

Show all publications