Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
CFD Simulation of Jet in Asymmetric Co-flows in a Down-scaled Rotary Kiln Model
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Strömningslära och experimentell mekanik.ORCID-id: 0000-0003-4455-9300
2017 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Rotary kilns are industrial furnaces that have been widely used in limestone calcination, cement industry and hazardous waste incineration for centuries. In this work a rotary kiln used for the iron ore pellet sintering process in the grate-kiln pelletizing system has been studied. In order to increase the energy efficiency, a large amount of air is supplied to the kiln through air channels connected to the cooler. This air is necessary for the coal combustion process and the heat transport to the kiln bed. However, the geometry of the kiln hood connecting the air channels and the cooler is complicated. As a consequence, the jet flame is unstable. In order to improve the performance of the jet flame it is therefore necessary to study the kiln aerodynamics to reveal the flow field. Even though it is a complicated problem containing fluid dynamics, combustion and heat and mass transfer, it can be simplified into a down-scaled cold model to make it feasible to understand the flow field both experimentally and numerically. In this work, the whole kiln is generalized as a high Reynolds number turbulent round jet interacting with asymmetric co-flows. With the aid from previous PIV measurement data of a down-scaled water model of the kiln, Computational Fluid Dynamics (CFD) simulations using the commercial code ANSYS CFX 16.0 have been pursued for two main purposes: 1) To find a turbulence model that is computationally inexpensive and able to capture the main features of the mean flow field; 2) With the turbulence model chosen in 1), to study the geometrical effect on the development of the primary jet. In Paper A, three turbulence models were employed, the standard k-epsilon model, a modified k-epsilon model with slightly higher turbulence production and the SSG Reynolds stress model. Wall functions were applied since resolving the viscous wall region was not a concern in this work. It is found that the standard k-epsilon model fit the experimental data best compared to the other two models and that all three turbulence models predict an asymmetric development of the primary jet, especially far downstream, In Paper B, again using the down-scaled kiln model, isothermal cases with four different nozzle diameters were simulated with the standard k-epsilon model. The aim is to investigate the effect of initial Reynolds number on the jet development in asymmetric co-flows from the air channels. It is found that, with increasing Reynolds number, the jet becomes shorter and the mixing between the primary jet and surrounding flow is better. A low-velocity region or external recirculation zone (ERZ) form near the kiln upper wall and shrink with increased nozzle diameter or decreased initial Reynolds number. The ERZ may stabilize the flame since it is a low-velocity region and consequently attract the jet to reside predominantly in it or in the shear layer. As a conclusion, by enlarging the jet exit diameter, the jet can be prolonged, while to a certain extent, the benefit from the ERZ would need to be sacrificed. Since the asymmetric development and the ERZ in the kiln were not studied during the previous PIV measurement campaign, more experimental studies are planned to provide more experimental evidences of the details of the flow and to lay grounds for validation of the CFD simulation results.

Ort, förlag, år, upplaga, sidor
Luleå: Luleå tekniska universitet, 2017.
Serie
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757
Nationell ämneskategori
Strömningsmekanik och akustik
Forskningsämne
Strömningslära
Identifikatorer
URN: urn:nbn:se:ltu:diva-61175ISBN: 978-91-7583-789-5 (tryckt)ISBN: 978-91-7583-790-1 (digital)OAI: oai:DiVA.org:ltu-61175DiVA, id: diva2:1058311
Presentation
2018-09-07, E1024, Luleå Tekniska Universitet, Luleå, 13:00 (Engelska)
Opponent
Handledare
Forskningsfinansiär
VINNOVA, 197426Tillgänglig från: 2016-12-21 Skapad: 2016-12-20 Senast uppdaterad: 2018-09-10Bibliografiskt granskad
Delarbeten
1. CFD Simulation of Jet Mixing with Asymmetric Co-flows in a Down-scaled Rotary Kiln Model
Öppna denna publikation i ny flik eller fönster >>CFD Simulation of Jet Mixing with Asymmetric Co-flows in a Down-scaled Rotary Kiln Model
Visa övriga...
2016 (Engelska)Ingår i: Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition, ASME Press, 2016, Vol. 7, artikel-id IMECE2016-65637Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Rotary kilns used in the iron pellet production in the grate-kiln pelletizing process normally have two asymmetric secondary air channels. The primary jet is ejected from a burner located in the middle of a back plate. As a consequence of the high flow rates and irregular-shaped secondary air channels, the aerodynamics in the kiln is strongly connected to the combustion and sintering performance. In this work a Computational Fluid Dynamics study is performed on a downscaled, simplified kiln model established in earlier numerical and experimental work. Comparisons are made with the experiment and among three turbulence models, the standard k-ε model, a k-ε model modified for turbulent axisymmetric round jets and Speziale-Sarkar-Garski Reynolds Stress Model (SSG-RSM hereafter). Recirculation regions with negative axial velocity are found at the upper side of the kiln and behind the back plate. Results from the standard k-ε model have the best fit to the experimental data regarding the centerline decay and the jet spreading of the velocity. The spreading rate of the scalar concentration calculated from the results with the modified k-ε model and the SSG-RSM fit better with the experiment, but they both underestimate the centerline decay and the spreading of the velocity. The modified k-ε model yields a more physical and realistic flow field compared to the standard k-ε model, and the results are close to those obtained with the SSG-RSM. Unlike the isotropic development of the jet predicted with the standard k-ε model, the modified k-ε model and the SSG-RSM show different development of the jet in the horizontal and vertical directions.

Ort, förlag, år, upplaga, sidor
ASME Press, 2016
Nationell ämneskategori
Strömningsmekanik och akustik
Forskningsämne
Strömningslära
Identifikatorer
urn:nbn:se:ltu:diva-60693 (URN)10.1115/IMECE2016-65637 (DOI)000400877800062 ()2-s2.0-85021639527 (Scopus ID)978-0-7918-5061-9 (ISBN)
Konferens
ASME 2016 International Mechanical Engineering Congress and Exposition (IMECE 2016), Phoenix, Arizona, USA, November 11–17, 2016
Projekt
Faste Laboratory
Forskningsfinansiär
VINNOVA, 197426
Tillgänglig från: 2016-11-25 Skapad: 2016-11-25 Senast uppdaterad: 2017-11-29Bibliografiskt granskad

Open Access i DiVA

fulltext(4749 kB)410 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 4749 kBChecksumma SHA-512
030aeab96f226698046d8d7775d90017d7a5965ecc39856fda076697dc3f1c1149e89cdb12f3b436ff49a5647510803c3a078a85b1c3b74319302b9d706f765c
Typ fulltextMimetyp application/pdf

Personposter BETA

Teng, Ziyan

Sök vidare i DiVA

Av författaren/redaktören
Teng, Ziyan
Av organisationen
Strömningslära och experimentell mekanik
Strömningsmekanik och akustik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 410 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 700 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf