Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
High-cycle thermal fatigue in mixing tees: new large-eddy simulations validated against new data obtained by PIV in the Vattenfall experiment
Vattenfall Research & Development.
Vattenfall Research & Development.
Vattenfall Research & Development.
Vise andre og tillknytning
2009 (engelsk)Inngår i: Proceedings of the 17th International Conference on Nuclear Engineering - 2009: presented at 17th International Conference on Nuclear Engineering, July 12 - 16, 2009, Brussels, Belgium, New York: American Society of Mechanical Engineers , 2009, s. 775-785Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

New data was obtained for a previously studied T-junction experimental setup [1] for a range of flow ratios between hot and cold flows in order to validate new Large Eddy Simulations (LES). The instantaneous velocity field downstream of the T-junction was measured with two-component Particle Image Velocimetry (PIV) in several horizontal and vertical planes at the centre line downstream of the T-junction. The generated PIV database enables a thorough validation of CFD turbulence statistics. The turbulence statistics are shown to be well predicted despite the fact that the mesh in the LES is rather coarse. By usage of time resolved PIV the temporal evolution of the predominant low frequent large-scale structures, responsible for much of the mixing and the high amplitude temperature fluctuations on the walls, were captured. Those structures are, however, weaker in LES than in PIV, being in line with the fact that the wake region behind the penetrating vertical hot jet is underpredicted in LES. Tests regarding the influence of the LES-results to the shape of the inlet boundary conditions (developed or flat symmetric mean-velocity profiles) were carried out and the sensitivity in the results was shown to be small. Furthermore, the results show good agreement with the experimental data independent of the flow ratio between the hot and the cold flows.

sted, utgiver, år, opplag, sider
New York: American Society of Mechanical Engineers , 2009. s. 775-785
Emneord [en]
Engineering mechanics - Fluid mechanics
Emneord [sv]
Teknisk mekanik - Strömningsmekanik
HSV kategori
Forskningsprogram
Strömningslära
Identifikatorer
URN: urn:nbn:se:ltu:diva-40277DOI: 10.1115/ICONE17-75962Scopus ID: 2-s2.0-77952823138Lokal ID: f59fdf10-8e1b-11de-8da0-000ea68e967bISBN: 978-0-7918-3852-5 (tryckt)OAI: oai:DiVA.org:ltu-40277DiVA, id: diva2:1013799
Konferanse
International Conference on Nuclear Engineering : 12/07/2009 - 16/07/2009
Merknad

Godkänd; 2009; 20090821 (torgre)

Tilgjengelig fra: 2016-10-03 Laget: 2016-10-03 Sist oppdatert: 2018-07-10bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekstScopus

Personposter BETA

Green, TorbjörnLundström, Staffan

Søk i DiVA

Av forfatter/redaktør
Green, TorbjörnLundström, Staffan
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar

doi
isbn
urn-nbn

Altmetric

doi
isbn
urn-nbn
Totalt: 91 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf