Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Rolling/sliding wear resistance of steels with different microstructures
2010 (engelsk)Independent thesis Advanced level (degree of Master (Two Years)), 20 poäng / 30 hpOppgave
Abstract [en]

The present investigation has been focused on the wear resistance of carbide–free bainitic steels and other microstructures of steels like conventional bainite, pearlite and quench & tempered (Q&T) martensite. The material which is used to create a carbide-free bainitic microstructure has 0.6 %C and 1.73 %Si. The rolling–sliding wear tests are performed in tribology lab on a Twin disc machine. The results are analyzed by using optical microscope, SEM, Optical surface profiler, XRD and Vickers hardness test. The results showed that ausferritic steel has excellent wear resistance in comparison to steels with other microstructures. The wear rate difference between ausferritic and other steels is almost twice that of the difference between AF 250 and AF 300. This proves that the austempered ausferritic steel has a very good wear resistance. The other samples with pearlitic, quenched and tempered martensitic and bainitic microstructures showed higher wear rate. The deformed layer thickness is found to be deeper for steels with ausferritic microstructures and the hardness increased more than 300HV over the initial bulk hardness for these steels. This increase might be due to plastic deformation and to the strain induced martensitic transformation of the retained austenite. Steels with other microstructures as bainite, pearlite and quenched and tempered martensite showed an increase in hardness along with an increase in deformation layer thickness which was lower than for steels with ausferritic microstructures.

sted, utgiver, år, opplag, sider
2010.
Emneord [en]
Technology, Rolling/sliding wear, Plastic deformation, carbide-free, steel, wear, Carbide-free bainitic steel, Bainitic, Pearlitic steel, Quenced and tempered steel, Strain, hardening
Emneord [sv]
Teknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-45291ISRN: LTU-PB-EX--10/027--SELokal ID: 3006e8c7-ab6b-4572-a65d-0fc757e44c57OAI: oai:DiVA.org:ltu-45291DiVA, id: diva2:1018578
Fag / kurs
Student thesis, at least 30 credits
Utdanningsprogram
Materials Engineering, master's level
Examiner
Merknad
Validerat; 20101217 (root)Tilgjengelig fra: 2016-10-04 Laget: 2016-10-04bibliografisk kontrollert

Open Access i DiVA

fulltekst(20383 kB)1821 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 20383 kBChecksum SHA-512
449bab2a5279de378e3c5294d54959c77c1407a3215f770cb43c64d5ebbacb7252065d06db2f0ff7cbb5cb5e7dc5fd4faf4422bdc4108bdcce04e4e1aac4d706
Type fulltextMimetype application/pdf

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 1824 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

urn-nbn

Altmetric

urn-nbn
Totalt: 360 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf