Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Aspects of Heat Flow in Laser Processing of Metals
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Produkt- och produktionsutveckling.ORCID-id: 0000-0002-9010-1555
2018 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

Since the laser was invented in 1960, its use in manufacturing industry has been growing rapidly. Laser processing of metals is based on the flow of heat that is generated by the absorbed laser beam. One outstanding aspect of laser beams is high precision along with high controllability of energy transfer, which includes creative techniques of shaping the beam and in turn the process. The thesis presents six Papers A-F on different metal processing techniques, namely welding, hardening and cutting, the latter combined with additive manufacturing. For each respective technique it was studied how desired properties can be optimized by controlled use of the laser beam and in turn of the temperature field. Addressing their different complexity of the heat transfer, various theoretical and experimental analysis methods were applied.

Laser beam welding is usually conducted with standard beam shapes, i.e. Gaussian or top-hat like, which is not always optimal for the process. Identification of an optimised weld pool shape or temperature cycle could increase the quality of welded products or even enable new applications. Papers A and B aim to increase the knowledge for non-standard beam shapes, particularly for single-pulse conduction mode welding. Paper A presents an investigation on an industrial application where a C-shaped weld joint is desired. The sensitivity to and optimization of different C-shaped beam irradiation profiles is discussed. The analysis is mainly carried out by applying Finite Element Analysis, FEA, to calculate the heat conduction contributions, showing unexpected sensitivity in certain regimes. Paper B presents a semi-analytical model for fast calculation of the temperature field from different beam profiles. Examples include multi-spots or the misalignment sensitivity of Diffractive Optical Elements.

In Paper C, for laser hardening of 11% Cr ferritic stainless steel the temperature field was studied to enable hardening. It was shown that single-track hardening without sensitisation could be achieved but overlapping tracks had a continuous network of ditched grain boundaries and is thereby at risk for sensitisation. The sensitised area is caused by a reheating cycle.

The same mechanism for the same material was studied in Paper D when applying a recently developed drop deposition technique, where additive manufacturing is fed by laser cutting. The same reheating isotherm becomes critical, but here sensitisation tests show a discontinuous network of ditched grain boundaries in the added material. The solid heat-affected zone on the other hand has a continuous network of ditched grain boundaries, which implies a sensitisation risk. The continuous network is however not in contact with the surface. The tested parameters is thus not at risk for intergranular corrosion through sensitisation.

For friction stir welding of dissimilar metals, Ti-6Al-4V with AISI 304L stainless steel, Paper E, the influence of a laser-induced preheating temperature field on the tool forces was investigated through numerical simulation. By suitable application of laser preheating, the forces acting on the tool can be substantially lowered, in a robust manner.

The temperature field from seam welding induces a residual stress field. In Paper F, for continuous wave laser keyhole welding of high strength steel butt joints, a method is presented to identify the residual stress behaviour of laser welded sheets by measurement of the fatigue crack growth rate during testing, by deriving the crack acceleration. The analysis was confirmed by hole drilling tests and by FEA.

The knowledge and methods of the above different experimental and theoretical studies complement each other. They contribute to further optimize certain aspects through laser-induced temperature fields, for different manufacturing techniques.

sted, utgiver, år, opplag, sider
Luleå: Luleå University of Technology, 2018.
Serie
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
HSV kategori
Forskningsprogram
Produktionsutveckling
Identifikatorer
URN: urn:nbn:se:ltu:diva-67586ISBN: 978-91-7790-051-1 (tryckt)ISBN: 978-91-7790-052-8 (digital)OAI: oai:DiVA.org:ltu-67586DiVA, id: diva2:1181658
Disputas
2018-04-11, E632, Luleå, 09:00 (engelsk)
Opponent
Veileder
Tilgjengelig fra: 2018-02-13 Laget: 2018-02-09 Sist oppdatert: 2018-03-20bibliografisk kontrollert
Delarbeid
1. Numerical optimization approaches of single-pulse conduction laser welding by beam shape tailoring
Åpne denne publikasjonen i ny fane eller vindu >>Numerical optimization approaches of single-pulse conduction laser welding by beam shape tailoring
Vise andre…
2016 (engelsk)Inngår i: Optics and lasers in engineering, ISSN 0143-8166, E-ISSN 1873-0302, Vol. 79, s. 48-54Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

While circular laser beams are usually applied in laser welding, for certain applications tailoring of the laser beam shape, e.g. by diffractive optical elements, can optimize the process. A case where overlap conduction mode welding should be used to produce a C-shaped joint was studied. For the dimensions studied in this paper, the weld joint deviated significantly from the C-shape of the single-pulse laser beam. Because of the complex heat flow interactions, the process requires optimization. Three approaches for extracting quantitative indicators for understanding the essential heat flow contributions process and for optimizing the C-shape of the weld and of the laser beam were studied and compared. While integral energy properties through a control volume and temperature gradients at key locations only partially describe the heat flow behaviour, the geometrical properties of the melt pool isotherm proved to be the most reliable method for optimization. While pronouncing the C-ends was not sufficient, an additional enlargement of the laser beam produced the desired C-shaped weld joint. The approach is analysed and the potential for generalization is discussed.

HSV kategori
Forskningsprogram
Produktionsutveckling
Identifikatorer
urn:nbn:se:ltu:diva-8128 (URN)10.1016/j.optlaseng.2015.12.001 (DOI)000369558900007 ()2-s2.0-84951067602 (Scopus ID)698c7324-1ed7-469f-bfdd-6d2f9ac24b38 (Lokal ID)698c7324-1ed7-469f-bfdd-6d2f9ac24b38 (Arkivnummer)698c7324-1ed7-469f-bfdd-6d2f9ac24b38 (OAI)
Merknad
Validerad; 2016; Nivå 2; 20151228 (andbra)Tilgjengelig fra: 2016-09-29 Laget: 2016-09-29 Sist oppdatert: 2018-07-10bibliografisk kontrollert
2. Analytical heat conduction modelling for shaped laser beams
Åpne denne publikasjonen i ny fane eller vindu >>Analytical heat conduction modelling for shaped laser beams
2017 (engelsk)Inngår i: Journal of Materials Processing Technology, ISSN 0924-0136, E-ISSN 1873-4774, Vol. 247, s. 48-54Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Conduction mode laser spot welding and laser spot hardening usually employ Gaussian or top-hat-like beam modes. One main requirement of these techniques is the avoidance of overheating in the centre of the laser-material interaction zone. Process flexibility can be improved by spatially and/or temporally shaping the beam, which can enable higher process quality, robustness or speed. A desired spatial beam shape can be achieved by a suitably designed diffractive optical element. However, the prediction of a suitable beam shape for a particular process can be complex. A simplified analytical heat conduction model has been developed that can rapidly calculate the temperature field and cooling behaviour for almost any spatial and temporal beam shape. The potential and limits of the model are demonstrated and discussed by calculating and analysing temperature profiles for several cases of multi-spot welding

sted, utgiver, år, opplag, sider
Elsevier, 2017
HSV kategori
Forskningsprogram
Produktionsutveckling
Identifikatorer
urn:nbn:se:ltu:diva-63056 (URN)10.1016/j.jmatprotec.2017.04.011 (DOI)000403133400006 ()2-s2.0-85018469004 (Scopus ID)
Merknad

Validerad; 2017; Nivå 2; 2017-05-11 (andbra)

Tilgjengelig fra: 2017-04-18 Laget: 2017-04-18 Sist oppdatert: 2018-07-10bibliografisk kontrollert
3. Laser surface hardening of 11% Cr ferritic stainless steel and its sensitisation behaviour
Åpne denne publikasjonen i ny fane eller vindu >>Laser surface hardening of 11% Cr ferritic stainless steel and its sensitisation behaviour
Vise andre…
2018 (engelsk)Inngår i: Surface & Coatings Technology, ISSN 0257-8972, E-ISSN 1879-3347, Vol. 344, s. 673-679Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

11% Cr ferritic stainless steel conforming to EN 1.4003 standard was surface hardened by a continuous-wave fibre laser beam. Both single-pass and multi-pass laser hardening was investigated. Different laser parameters were compared and their influence on hardness, microstructure, geometry of the hardened zone and sensitisation was investigated, especially for overlapping passes. The experiments showed that a surface hardness which is double that of the base material hardness was obtainable via martensitic phase transformation and high cooling rate, in spite of the low carbon and nitrogen content. This behaviour could be predicted from the chemical composition using the Kaltenhauser Ferrite Factor. Hardening at higher power levels gives more coarse-grained lath martensite but does not increase the hardness. Sensitisation was not a problem in single-pass hardening. However, the production of overlapping tracks could be detrimental to corrosion resistance in 11% Cr steel due to the formation of chromium carbides and nitrides.

sted, utgiver, år, opplag, sider
Elsevier, 2018
Emneord
Laser surface hardening, Ferritic stainless steel, Sensitisation
HSV kategori
Forskningsprogram
Produktionsutveckling
Identifikatorer
urn:nbn:se:ltu:diva-67581 (URN)10.1016/j.surfcoat.2018.04.002 (DOI)000437391300077 ()2-s2.0-85044924333 (Scopus ID)
Merknad

Validerad;2018;Nivå 2;2018-04-06 (andbra)

Tilgjengelig fra: 2018-02-09 Laget: 2018-02-09 Sist oppdatert: 2019-01-15bibliografisk kontrollert
4. Sensitisation behaviour of drop-deposited 11% Cr ferritic stainless steel
Åpne denne publikasjonen i ny fane eller vindu >>Sensitisation behaviour of drop-deposited 11% Cr ferritic stainless steel
(engelsk)Manuskript (preprint) (Annet vitenskapelig)
HSV kategori
Identifikatorer
urn:nbn:se:ltu:diva-67585 (URN)
Tilgjengelig fra: 2018-02-09 Laget: 2018-02-09 Sist oppdatert: 2018-02-09
5. Numerical simulation of laser preheating of friction stir welding of dissimilar metals
Åpne denne publikasjonen i ny fane eller vindu >>Numerical simulation of laser preheating of friction stir welding of dissimilar metals
Vise andre…
2018 (engelsk)Inngår i: Science and technology of welding and joining, ISSN 1362-1718, E-ISSN 1743-2936, Vol. 23, nr 4, s. 351-356Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

Friction stir welding, FSW, of harder metal alloys is difficult to perform, like here dissimilar welding of titanium alloy to stainless steel in butt joint configuration. One major limitation is tool wear which can be reduced by preheating with a laser beam. A mathematical model to calculate the tool forces during FSW was developed further. The calculations show that the laser beam reduces forces at the pin and shoulder of the FSW-tool, accompanied by reduced heat generation through the tool. Within its operating limits, the process has low sensitivity on the lateral position of the leading laser beam. The model supports the understanding and optimisation of the complex interaction zone of forces and heat around the FSW-tool.

sted, utgiver, år, opplag, sider
Taylor & Francis, 2018
HSV kategori
Forskningsprogram
Produktionsutveckling
Identifikatorer
urn:nbn:se:ltu:diva-66366 (URN)10.1080/13621718.2017.1391936 (DOI)000435470000009 ()2-s2.0-85032491421 (Scopus ID)
Merknad

Validerad;2018;Nivå 2;2018-03-14 (andbra)

Tilgjengelig fra: 2017-11-02 Laget: 2017-11-02 Sist oppdatert: 2018-07-26bibliografisk kontrollert
6. Identifying residual stresses in laser welds by fatigue crack growth acceleration measurement
Åpne denne publikasjonen i ny fane eller vindu >>Identifying residual stresses in laser welds by fatigue crack growth acceleration measurement
Vise andre…
2015 (engelsk)Inngår i: Journal of laser applications, ISSN 1042-346X, E-ISSN 1938-1387, Vol. 27, nr 4, artikkel-id 42002Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

During laser welding, residual stresses are thermally induced. They can have strong impact on the fatigue behavior and fatigue life. A standardized measurement method for the fatigue crack growth rate was expanded to identify residual stress along the cracking path. The second derivative of the measured crack opening and in turn the crack acceleration corresponded well with distinct acceleration maxima and minima and accordingly with tensile and compressive stress, as was basically proven by numerical simulation. The method is simple and extendable. It provides valuable information, as was demonstrated for various situations.

HSV kategori
Forskningsprogram
Produktionsutveckling; Hållfasthetslära
Identifikatorer
urn:nbn:se:ltu:diva-10852 (URN)10.2351/1.4923472 (DOI)000362569000002 ()2-s2.0-84936882579 (Scopus ID)9bb76bdd-9c0b-4c71-8a47-fc833d81bb4e (Lokal ID)9bb76bdd-9c0b-4c71-8a47-fc833d81bb4e (Arkivnummer)9bb76bdd-9c0b-4c71-8a47-fc833d81bb4e (OAI)
Merknad
Validerad; 2015; Nivå 2; 20151102 (andbra)Tilgjengelig fra: 2016-09-29 Laget: 2016-09-29 Sist oppdatert: 2018-07-10bibliografisk kontrollert

Open Access i DiVA

fulltext(10635 kB)318 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 10635 kBChecksum SHA-512
8c55282046b335371b1b896a7da0b8404e2faa2241ddfc2754d5e3e5bfcb3f8c683a275c23757d506fd898e6130c4dcb33d09002d64523315308c337b46836f2
Type fulltextMimetype application/pdf

Søk i DiVA

Av forfatter/redaktør
Sundqvist, Jesper
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 318 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

isbn
urn-nbn

Altmetric

isbn
urn-nbn
Totalt: 721 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf