Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effect of short-term thermomechanical densification of wood veneers on the properties of birch plywood
Ukranian National Forestry University.
Technical University in Zvolen.
DJ Timber Consultancy Ltd.
2018 (Engelska)Ingår i: European Journal of Wood and Wood Products, ISSN 0018-3768, E-ISSN 1436-736X, Vol. 76, nr 2, s. 549-562Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

In this study, the physical and mechanical properties of plywood panels made from pre-compressed birch (Betula verrucosa Ehrh.) veneer were evaluated. Veneer sheets underwent short-term thermo-mechanical (STTM) compression at temperatures of 150 or 180 ⁰C and at pressures of 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 or 3.5 MPa for a period of 1 minute before being adhesive applied and pressed into panels using phenol formaldehyde adhesive at 100 g/m2 spread rate; this was one third less than the adhesive spread used for the control panels (150 g/m2). The pressing pressure was 1.0 MPa that was almost half of the pressure used for the control panels (1.8 MPa); and pressing time was 3 min, also half of the pressing time used for the control panels (6 min). The results showed that surface roughness of compressed veneer, water absorption and thickness swelling of plywood panels made from compressed veneer were significantly improved. The shear strength values of plywood panels made from compressed birch veneer even with reduced adhesive spread were higher than those of plywood panels made from un-compressed veneer. The findings in this study indicated that compression of birch veneer would be considered as an alternative to produce more eco-friendly (owing to smaller adhesive spread) value-added material with enhanced properties.

Ort, förlag, år, upplaga, sidor
Springer, 2018. Vol. 76, nr 2, s. 549-562
Nationell ämneskategori
Trävetenskap Annan maskinteknik
Forskningsämne
Träteknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-70691DOI: 10.1007/s00107-017-1233-4OAI: oai:DiVA.org:ltu-70691DiVA, id: diva2:1243424
Tillgänglig från: 2018-08-31 Skapad: 2018-08-31 Senast uppdaterad: 2018-11-23Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltext

Sök vidare i DiVA

Av författaren/redaktören
Jones, Dennis
I samma tidskrift
European Journal of Wood and Wood Products
TrävetenskapAnnan maskinteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 88 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf