Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Pre-treatment with sodium silicate, sodium hydroxide, ionic liquids or methacrylate resin to reduce the set-recovery and increase the hardness of surface-densified Scots pine
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Träteknik.ORCID-id: 0000-0002-1489-0839
Department of Bioproducts and Biosystems, Aalto University.
Department of Bioproducts and Biosystems, Aalto University.
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Träteknik.ORCID-id: 0000-0002-4526-9391
2017 (Engelska)Ingår i: iForest : Biogeosciences and Forestry, ISSN 1971-7458, E-ISSN 1971-7458, Vol. 10, nr 5, s. 857-864Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The hardness of the outer regions of solid wood can be improved by surface densification, and this opens up new fields of application for low-density species. So far, surface densification relies on time- and energy-consuming batch processes, and this means that the potential advantages over more expensive hardwood species or non-renewable materials are reduced. Using fossil-based plastics or applying wood densification processes with a high energy consumption has adverse effects on the environment. In a previous study, it was shown that the surface of wood can be densified by a continuous high-speed process, adopting a roller pressing approach. The desired density profiles could be obtained at process speeds of up to 80 m min-1, but an equally simple and fast method to eliminate the moisture-induced set-recovery of the densified wood cells is still required. For this reason, the goal of the present study was to evaluate the effect on the set-recovery and hardness of surface-densified Scots pine after a fast pre-treatment with solutions of sodium silicate, sodium hydroxide, methacrylate resin, and ionic liquids. The Scots pine specimens were pre-treated by applying the chemical treatment and impregnation agents to the wood surface with a paper towel, before the specimens were densified. For each type of treatment, 15 specimens were densified in a hot press. The set-recovery was measured after two wet-dry cycles, and 30 Brinell hardness measurements were carried out on each group of specimens. In general, the effect of the treatments on the set-recovery was rather low. Ionic liquid solutions appear to work as a strong plasticiser and the treatment led to a reduction in set-recovery by 25%. The treatments with sodium silicate, ionic liquids and methacrylate resin led to a greater hardness than in untreated and densified specimens. Further experiments are needed to improve the depth of penetration of the treatment solutions into the wood surface, as this was identified as one of the main causes of the rather weak effects.

Ort, förlag, år, upplaga, sidor
Italian Society of Silviculture and Forest Ecology , 2017. Vol. 10, nr 5, s. 857-864
Nationell ämneskategori
Trävetenskap Annan maskinteknik
Forskningsämne
Träteknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-66300DOI: 10.3832/ifor2385-010ISI: 000413842100004Scopus ID: 2-s2.0-85039747852OAI: oai:DiVA.org:ltu-66300DiVA, id: diva2:1153231
Anmärkning

Validerad;2017;Nivå 2;2017-10-31 (rokbeg)

Tillgänglig från: 2017-10-29 Skapad: 2017-10-29 Senast uppdaterad: 2019-09-12Bibliografiskt granskad
Ingår i avhandling
1. Surface Densification of Solid Wood: Paving the Way Towards Industrial Implementation
Öppna denna publikation i ny flik eller fönster >>Surface Densification of Solid Wood: Paving the Way Towards Industrial Implementation
2019 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Surface densification of a piece of solid wood results in an increase in density and in hardness in the whole or a part of the densified material, and is one of the ways of improving the properties and value of low-density wood species. Despite efforts for many years, mass commercialisation of either bulk- or surface-densified wood products has not yet been achieved. Most of the previously tested densification methods have limitations in terms of processing speed and integration into the largely continuous wood processing chain, which leads to high production costs. Established methods to eliminate the set-recovery rely either on technologically complex close-system methods or on open-system methods that require relatively long periods of high energy input. For this reason, impregnation with adhesives is used in almost all commercially available densified wood products, and none of them have risen above their status of being niche products.

Based on this background, three objectives for this project were formulated: (1) the development of a method for selecting the most suitable wood species for surface densification, (2) showing that surface densification can be carried out in a continuous manner at high process speeds, (3) and researching a fast open-system method to reduce the set- recovery.

The method developed for selecting the most suitable wood species for surface densification was based on Lean principles, and it confirmed the suitability of previously studied wood species, such as Scots pine, spruce and poplar. In addition, several suitable alternatives from different parts of the world and from different types of forest were identified. This suggests a high potential for establishing such wood products on a global market level.

Two studies using a continuous roller press showed that solid wood can be successfully surface-densified at process speeds of up to 80 m min-1, and that some defects, such as knots, are acceptable in the raw material, but the problem of set-recovery could not however be solved.

A screening experiment testing different open-system approaches to reduce the set-recovery highlighted the potential of a novel method using ionic liquids as a plasticiser prior to the surface densification of solid Scots pine. The set-recovery could be reduced to 10%, with the time of high energy input being less than 10 minutes. The Brinell hardness was increased by a factor of 2.7 over that of undensified wood. A study with thermo-gravimetric analysis and digital image correlation showed that the set-recovery almost exclusively happens in the transition zone between the densified and undensified wood cells, where there is less penetration of the ionic liquids.

The work accomplished in this project has successfully addressed several gaps in the field of wood densification, firstly, by employing a continuous surface densification process using a roller press, and secondly, by developing and studying a fast open-system pre-treatment with ionic liquids, which greatly reduces the set-recovery. Research will continue on a new band press, facilitating a swift transfer of knowledge between small- scale studies and the continuous surface densification of production-size wooden boards.

Ort, förlag, år, upplaga, sidor
Luleå University of Technology, 2019. s. 123
Serie
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
Nationell ämneskategori
Trävetenskap Annan maskinteknik
Forskningsämne
Träteknik
Identifikatorer
urn:nbn:se:ltu:diva-75794 (URN)978-91-7790-435-9 (ISBN)978-91-7790-436-6 (ISBN)
Disputation
2019-10-08, Auditorium A, Skellefteå, 09:00 (Engelska)
Opponent
Handledare
Tillgänglig från: 2019-09-02 Skapad: 2019-09-02 Senast uppdaterad: 2019-09-12Bibliografiskt granskad

Open Access i DiVA

fulltext(1063 kB)68 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 1063 kBChecksumma SHA-512
a793f7cbbc47bcb013e280e58cf6e09eab18adb38a3590eefeddf7984067adc55e5755030f936c3905f4cda23d946b958a5a0441f039ed7dd0a10c49ab4ac1f2
Typ fulltextMimetyp application/pdf

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Neyses, BenediktSandberg, Dick

Sök vidare i DiVA

Av författaren/redaktören
Neyses, BenediktSandberg, Dick
Av organisationen
Träteknik
I samma tidskrift
iForest : Biogeosciences and Forestry
TrävetenskapAnnan maskinteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 68 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 173 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf