Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Centrifugal pump performance deratings for a broadly graded (4-component) slurry
GIWIndustries, United States.
Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, Arkitektur och vatten.
GIWIndustries, United States.
GIWIndustries, United States.
2017 (Engelska)Ingår i: International Conferences on Transport and Sedimentation of Solid Particles 2017, Wydawnictwo Uniwersytetu Przyrodniczego we Wroclawiu , 2017, s. 359-367Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

A 4-component model for settling slurry pipeline friction loss has been previously described by Wilson and Sellgren. The goal of the present work is to adapt the concepts of this model to the calculation of centrifugal slurry pump performance deratings (i.e. pump solids effect). Tests were carried out using four different graded silica and crushed granite products representing the four model components. These were then combined and tested in permutations from the individual components to the complete mixture at various concentrations. Closed-loop run times were limited to minimize solids degradation. Primary experiments were carried out using a GIW 8×10 LSA-32 pump and selected corresponding experiments were repeated using a smaller GIW 3×4 LCC-12 pump. In all, 40 tests were performed with particle sizes ranging from minus 40 μm to 12.5 mm, dso particle sizes from minus 40 um to 7.5 mm, and delivered solids concentrations from 4% to 38% by volume. Particle size distributions varied from very narrow to very broad, with d85/d50 ratios ranging from 1.3 to 30. A new 4-component model for the pump Head Reduction Factor (solids effect on head) is proposed and compared with the existing mono-sized model described in the Centrifugal Slurry Pump Standard ANSI/HI 12.1-12.6-2016.

Ort, förlag, år, upplaga, sidor
Wydawnictwo Uniwersytetu Przyrodniczego we Wroclawiu , 2017. s. 359-367
Serie
Zeszyty naukowe Akademii Rolniczej we Wrocławiu Konferencje, ISSN 1232-3071
Nationell ämneskategori
Vattenteknik
Forskningsämne
Vattenteknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-67158Scopus ID: 2-s2.0-85038102731OAI: oai:DiVA.org:ltu-67158DiVA, id: diva2:1170749
Konferens
18th International Conferences on Transport and Sedimentation of Solid Particles, T and S 2017; Prague; Czech Republic; 11-15 September 2017
Tillgänglig från: 2018-01-04 Skapad: 2018-01-04 Senast uppdaterad: 2018-01-09Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Scopus

Sök vidare i DiVA

Av författaren/redaktören
Sellgren, Anders
Av organisationen
Arkitektur och vatten
Vattenteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 53 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf