Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effects of molding temperature, pressure and time on polyvinyl alcohol nanocomposites properties produced by freeze drying technique
Department of Wood and Paper Science and Technology, Faculty of Natural Resources, University of Tehran, Karaj.
Food Science Department, Agriculture College, Isfahan University of Technology.
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Materialvetenskap. Department of Wood and Paper Science and Technology, Faculty of Natural Resources, University of Tehran, Karaj.
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Materialvetenskap.ORCID-id: 0000-0003-4762-2854
2018 (Engelska)Ingår i: Industrial crops and products (Print), ISSN 0926-6690, E-ISSN 1872-633X, Vol. 121, s. 1-9Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The main aim of this study was to develop a novel approach to incorporate high cellulose nanofiber (CNF) loadings into polyvinyl alcohol (PVA) nanocomposites. The nanocomposites were prepared by freezing via liquid nitrogen and consequent freeze drying combined with hot press molding. To investigate the effect of the molding parameters on the morphological, mechanical and thermal properties, chemical structure and transparency of the PVA + CNF nanocomposites, two different mold pressures, temperatures and holding times were used for fabrication of PVA + CNF nanocomposites. The maximum tensile strength of 121 MPa of the PVA + CNF 20% nanocomposites was obtained when they were molded at 130 °C and 50 kPa for 7 min. Dynamic mechanical analysis showed that the storage modulus of the composites prepared at 130 °C and 50 kPa for 7 min is about 20% higher than nanocomposites molded at 150 °C and 150 kPa for 10 min. Optical properties (absorption spectra) of the PVA and PVA + CNF nanocomposites were increased as the mold pressures, temperature and holding time increased. Micrographs showed more sough fracture surface with increasing pressure and temperature during hot press molding.

Ort, förlag, år, upplaga, sidor
Elsevier, 2018. Vol. 121, s. 1-9
Nationell ämneskategori
Biomaterial
Forskningsämne
Trä och bionanokompositer
Identifikatorer
URN: urn:nbn:se:ltu:diva-68590DOI: 10.1016/j.indcrop.2018.04.079ISI: 000437996900001Scopus ID: 2-s2.0-85046705277OAI: oai:DiVA.org:ltu-68590DiVA, id: diva2:1203202
Anmärkning

Validerad;2018;Nivå 2;2018-05-02 (andbra)

Tillgänglig från: 2018-05-02 Skapad: 2018-05-02 Senast uppdaterad: 2018-08-08Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Jonoobi, MehdiOksman, Kristiina

Sök vidare i DiVA

Av författaren/redaktören
Jonoobi, MehdiOksman, Kristiina
Av organisationen
Materialvetenskap
I samma tidskrift
Industrial crops and products (Print)
Biomaterial

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 50 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf