Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Chemical milling effect on the low cycle fatigue properties of cast Ti-6Al-2Sn-4Zr-2Mo alloy
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Materialvetenskap.
Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona.
Department of Materials Science and Engineering, Universitat Politècnica de Catalunya, Barcelona.
Visa övriga samt affilieringar
Antal upphovsmän: 62016 (Engelska)Ingår i: International Journal of Fatigue, ISSN 0142-1123, E-ISSN 1879-3452, Vol. 92, nr 1, s. 193-202Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The current research work presents the chemical milling effect on the low cycle fatigue properties of cast Ti-6Al-2Sn-4Zr-2Mo alloy. Chemical milling treatment is one of the final steps in manufacturing titanium alloy components that removes the brittle alpha-case layer formed during various thermal processes. The treatment includes immersion of the components in solutions containing hydrofluoric (HF) and nitric (HNO3) acids in relevant molar ratios. Although this treatment demonstrates advantages in handling components with complex net geometries, it may have detrimental effects on the surface, by introducing pitting and/or intergranular corrosion and thereby adversely affecting in particular the fatigue strength. The first series of specimens were tested in as-machined condition. Two more series were, prior to fatigue testing, subjected to 5 and 60 minutes chemical milling treatment. It was found that the fatigue lives were substantially decreased for the chemically treated specimens. The fractographic investigation of all mechanically tested samples revealed multiple fatigue crack initiation sites in the chemically milled samples. These cracks were located either at the prior beta grain boundary or the prior beta grain boundary triple joints. The prior beta grain boundaries were found to have deep ditch-like appearance which depth increased with increasing milling time. These ditch-like grain boundaries acts as stress raisers and thereby promote early fatigue crack initiation and thus lower fatigue life.

Ort, förlag, år, upplaga, sidor
2016. Vol. 92, nr 1, s. 193-202
Nationell ämneskategori
Annan materialteknik
Forskningsämne
Materialteknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-3804DOI: 10.1016/j.ijfatigue.2016.07.003ISI: 000383930200019Scopus ID: 2-s2.0-84978771831Lokalt ID: 1a417aff-661b-4192-bd0c-6380c8f83b53OAI: oai:DiVA.org:ltu-3804DiVA, id: diva2:976665
Anmärkning

Validerad; 2016; Nivå 2; 20160706 (andbra)

Tillgänglig från: 2016-09-29 Skapad: 2016-09-29 Senast uppdaterad: 2018-07-10Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Sefer, BirhanGaddam, RaghuveerAntti, Marta-LenaPederson, Robert

Sök vidare i DiVA

Av författaren/redaktören
Sefer, BirhanGaddam, RaghuveerAntti, Marta-LenaPederson, Robert
Av organisationen
Materialvetenskap
I samma tidskrift
International Journal of Fatigue
Annan materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 277 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf