Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Dry-Spun Single-Filament Fibers Comprising Solely Cellulose Nanofibers from Bioresidue
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Materialvetenskap.ORCID-id: 0000-0002-6702-4627
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Materialvetenskap.ORCID-id: 0000-0002-2388-3358
PANalytical.
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Materialvetenskap.ORCID-id: 0000-0001-8909-3554
Visa övriga samt affilieringar
2015 (Engelska)Ingår i: ACS Applied Materials and Interfaces, ISSN 1944-8244, E-ISSN 1944-8252, Vol. 7, nr 23, s. 13022-13028Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

We demonstrated that low-cost and environmentally friendly filaments of native cellulose can be prepared by dry spinning an aqueous suspension of cellulose nanofibers (CNF). The CNF were extracted from banana rachis, a bioresidue from banana cultivation. The relationship between spinning rate, CNF concentration, and the mechanical properties of the filaments were investigated and the results showed that the modulus of the filaments was increased from 7.8 to 12.6 GPa and the strength increased from 131 to 222 MPa when the lowest concentration and highest speed was used. This improvement is believed to be due to an increased orientation of the CNF in the filament. A minimum concentration of 6.5 wt % was required for continuous filament spinning using the current setup. However, this relatively high concentration is thought to limit the orientation of the CNF in the filament. The process used in this study has a good potential for upscaling providing a continuous filament production with well-controlled speed, but further work is required to increase the orientation and subsequently the mechanical properties.

Ort, förlag, år, upplaga, sidor
2015. Vol. 7, nr 23, s. 13022-13028
Nationell ämneskategori
Biomaterial
Forskningsämne
Trä och bionanokompositer
Identifikatorer
URN: urn:nbn:se:ltu:diva-4989DOI: 10.1021/acsami.5b03091ISI: 000356753500082PubMedID: 26017287Scopus ID: 2-s2.0-84935018487Lokalt ID: 300d2d07-e9a6-4a48-abb5-c98754d8d41cOAI: oai:DiVA.org:ltu-4989DiVA, id: diva2:977863
Anmärkning
Validerad; 2015; Nivå 2; 20140929 (salhoo)Tillgänglig från: 2016-09-29 Skapad: 2016-09-29 Senast uppdaterad: 2018-07-10Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextPubMedScopus

Personposter BETA

Hooshmand, SalehAitomäki, YvonneMathew, Aji P.Oksman, Kristiina

Sök vidare i DiVA

Av författaren/redaktören
Hooshmand, SalehAitomäki, YvonneMathew, Aji P.Oksman, Kristiina
Av organisationen
Materialvetenskap
I samma tidskrift
ACS Applied Materials and Interfaces
Biomaterial

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
pubmed
urn-nbn

Altmetricpoäng

doi
pubmed
urn-nbn
Totalt: 168 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf