Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effects of loading rate on rock fracture
Visa övriga samt affilieringar
1999 (Engelska)Ingår i: International Journal of Rock Mechanics And Mining Sciences, ISSN 1365-1609, E-ISSN 1873-4545, Vol. 36, nr 5, s. 597-611Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

By means of a wedge loading applied to a short-rod rock fracture specimen tested with the MTS 810 or SHPB (split Hopkinson pressure bar), the fracture toughness of Fangshan gabbro and Fangshan marble was measured over a wide range of loading rates, =10−2–106 MPa m1/2 s−1. In order to determine the dynamic fracture toughness of the rock as exactly as possible, the dynamic Moiré method and strain–gauge method were used in determining the critical time of dynamic fracture. The testing results indicated that the critical time was generally shorter than the transmitted wave peak time, and the differences between the two times had a weak increasing tendency with loading rates. The experimental results for rock fracture showed that the static fracture toughness KIc of the rock was nearly a constant, but the dynamic fracture toughness KId of the rock (≥104 MPa m1/2 s−1) increased with the loading rate, i.e. log(KId)=a log +b. Macroobservations for fractured rock specimens indicated that, in the section (which was perpendicular to the fracture surface) of a specimen loaded by a dynamic load, there was clear crack branching or bifurcation, and the higher the loading rate was, the more branching cracks occurred. Furthermore, at very high loading rates (≥106 MPa m1/2 s−1) the rock specimen was broken into several fragments rather than only two halves. However, for a statically fractured specimen there was hardly any crack branching. Finally, some applications of this investigation in engineering practice are discussed.

Ort, förlag, år, upplaga, sidor
1999. Vol. 36, nr 5, s. 597-611
Nationell ämneskategori
Annan samhällsbyggnadsteknik
Forskningsämne
Gruv- och Berganläggningsteknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-7637DOI: 10.1016/S0148-9062(99)00031-5ISI: 000082503800003Scopus ID: 2-s2.0-0032848926Lokalt ID: 60907ad0-a8c4-11dc-9057-000ea68e967bOAI: oai:DiVA.org:ltu-7637DiVA, id: diva2:980527
Anmärkning
Godkänd; 1999; 20071212 (ysko)Tillgänglig från: 2016-09-29 Skapad: 2016-09-29 Senast uppdaterad: 2018-07-10Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Lindqvist, Per-Arne

Sök vidare i DiVA

Av författaren/redaktören
Lindqvist, Per-Arne
Av organisationen
Geoteknologi
I samma tidskrift
International Journal of Rock Mechanics And Mining Sciences
Annan samhällsbyggnadsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 50 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf