Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
A 3D in-situ investigation of the deformation in compressive loading in the thickness direction of cellulose fiber mats
Department of Engineering Sciences, Uppsala University.
ABB Corporate Research, 721 78, Västerås.
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Strömningslära och experimentell mekanik.ORCID-id: 0000-0001-7395-3302
ABB Corporate Research, 721 78, Västerås.
Visa övriga samt affilieringar
2015 (Engelska)Ingår i: Cellulose (London), ISSN 0969-0239, E-ISSN 1572-882X, Vol. 22, nr 5, s. 2993-3001Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Fiber mat materials based on cellulose natural fibers combines a useful set of properties, including renewability, stiffness, strength and dielectric insulation, etc. The dominant in-plane fiber orientation ensures the in-plane performance, at the expense of reduced out-of-plane behavior, which has not been studied as extensively as the in-plane behavior. Quantitative use of X-ray micro-computed tomography and strain analyses under in-situ loading open up possibilities to identify key mechanisms responsible for deformation. In the present investigation, focus is placed on the out-of-plane deformation under compressive loading of thick, high density paper, known as pressboard. The samples were compressed in the chamber of a microtomographic scanner. 3D images were captured before and after the loading the sample. From sequential 3D images, the strain field inside the material was calculated using digital volume correlation. Two different test pieces were tested, namely unpolished and surface polished ones. The first principal strain component of the strain tensor showed a significant correlation with the density variation in the material, in particular on the top and bottom surfaces of unpolished samples. The manufacturing-induced grooves generate inhomogeneities in the microstructure of the surface, thus creating high strain concentration zones which give a sensible contribution to the overall compliance of the unpolished material. More generally, the results reveal that, on the micrometer scale, high density fiber pressboard behaves as a porous material rather than a low density fiber network.

Ort, förlag, år, upplaga, sidor
2015. Vol. 22, nr 5, s. 2993-3001
Nationell ämneskategori
Teknisk mekanik
Forskningsämne
Experimentell mekanik
Identifikatorer
URN: urn:nbn:se:ltu:diva-13682DOI: 10.1007/s10570-015-0727-7ISI: 000361002000011Scopus ID: 2-s2.0-84941414539Lokalt ID: cf3a80ef-5a68-44c8-aa28-3ff20395ee67OAI: oai:DiVA.org:ltu-13682DiVA, id: diva2:986635
Anmärkning
Validerad; 2015; Nivå 2; 20150819 (andbra)Tillgänglig från: 2016-09-29 Skapad: 2016-09-29 Senast uppdaterad: 2018-07-10Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Forsberg, FredrikSjödahl, Mikael

Sök vidare i DiVA

Av författaren/redaktören
Forsberg, FredrikSjödahl, Mikael
Av organisationen
Strömningslära och experimentell mekanik
I samma tidskrift
Cellulose (London)
Teknisk mekanik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 474 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf