Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Biotribology: surface chemistry characterization of metal-on-metal implants in rich environment
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Maskinelement.ORCID-id: 0000-0001-8676-8819
2008 (Engelska)Ingår i: Proceedings of NORDTRIB 2008, 13th Nordic Symposium on Tribology: Scandic Rosendahl Hotel, Tampere, Finland, June 10 - 13, 2008 / [ed] Jaakko Kleemola; Arto Lehtovaara, Tampere: Tampere University of Technology, 2008Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Introduction: Osteolysis induced by wear particles in metal-on-polyethylene hip implants has been the key motivation to look for alternative bearings and in fact emergence and development of new metal-on-metal (MOM) implant materials for joint replacement. However, while the volume of wear particles produced in metal-on-metal articulations is lower the number of particles produced is higher per volume of wear, due to the reduced size of wear particles. Although various surface and interface characterization methods have been applied to study the physical wear, corrosion and implant surface interactions with biological environments, presently the local and systematic effects of metal debris are poorly understood. Materials and Methods: Cobalt-chromium-molybdenium (CoCr) alloys have been used in MOM implants extensively. Metallic samples were cut and mirror polished. In the present study The samples were immersed in four different biological lubricants (Human serum, synovial fluid, MEM and Milli-Q water) for 10 min, 1 hr, and 5 days of immersion and then studied by X-ray Photoelectron Spectroscopy (XPS) and time-of-flight secondary ion mass spectroscopy (ToF-SIMS). XPS determined the chemistry of elements located whitin the top few nanometers of materials. Significant differences in the absorbed layers and differences in the corrosive nature of Ti and CoCr implant substrates and wear particles were found. Results and discussion: Spectra from P 2p3/2, O1s, Ca2p3/2, C1s and N1s were collected. Metallic substrates behaved differently when immersed in the same lubricant. The four lubricants reacted different with metallic surfaces. Larger calcium deposits occurred in supersaturated physiological solutions. Deposition of calcium phosphate was different on CoCr alloys depending on the lubricant and the immersion period. Specimens immersed into synovial fluid gave thinner oxide layers and lower calcium phosphate deposits. For all specimens, water immersion resulted in thicker oxide layer. For many reactive metals, dissolution of ions from the metal surface takes place along with thickening of the metal oxide during passivation, or surface corrosion.Conclusion: Glycoaminoglycans (GAG) and related proteins may hinder calcium phosphate deposition on samples immersed in synovial fluid. ToF-SIMS measurements showed that the resulting corrosion products depend upon the nature of the environment. The thickness of the calcium phosphate deposits was different for different metal substrate.

Ort, förlag, år, upplaga, sidor
Tampere: Tampere University of Technology, 2008.
Nationell ämneskategori
Tribologi (ytteknik omfattande friktion, nötning och smörjning)
Forskningsämne
Maskinelement; Centrumbildning - Centrum för medicinsk teknik och fysik (CMTF)
Identifikatorer
URN: urn:nbn:se:ltu:diva-30081Lokalt ID: 3ca1d1f0-7a60-11dd-b356-000ea68e967bISBN: 978-952-15-1959-8 (digital)OAI: oai:DiVA.org:ltu-30081DiVA, id: diva2:1003308
Konferens
Nordic Symposium on Tribology : 10/06/2008 - 13/06/2008
Anmärkning

Godkänd; 2008; Bibliografisk uppgift: 1 CD-ROM; 20080904 (ysko)

Tillgänglig från: 2016-09-30 Skapad: 2016-09-30 Senast uppdaterad: 2024-04-17Bibliografiskt granskad

Open Access i DiVA

fulltext(84 kB)96 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 84 kBChecksumma SHA-512
399de2e92787fff4fcd4320fc78c130836b7daf9e2e9b816b23447b3f3d93cf8cfcb5ef579c439b50a91c41c164b9fd5f7174d6ab02f2c8e182205bc54b24780
Typ fulltextMimetyp application/pdf

Person

Emami, NazaninLarsson, RolandHöglund, Erik

Sök vidare i DiVA

Av författaren/redaktören
Emami, NazaninLarsson, RolandHöglund, Erik
Av organisationen
Maskinelement
Tribologi (ytteknik omfattande friktion, nötning och smörjning)

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 96 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 232 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf