Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Dropout formation in thick steel plates during laser welding
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Produkt- och produktionsutveckling.ORCID-id: 0000-0003-4265-1541
University of Stuttgart.
2015 (Engelska)Konferensbidrag, Enbart muntlig presentation (Refereegranskat)
Abstract [en]

Laser welding is a promising technique for welding thick metal sheets, which is usually used for achieving full penetration in a single weld pass. However, among the imperfections that can occur, dropout formation becomes an increasingly larger problem when the sheets to be welded get thicker. When the sheets are 15 mm or thicker it is a challenge to suppress and countermeasures to suppress dropouts get less impact. If full penetration is not achieved, the dropout formation cannot be formed and the melt flows to form better weld caps. Therefore a typical method when welding 15 mm and thicker is to use partial penetration from both sides of the joint and thereby achieving full penetration, at a cost of increasing plate handling complexities and time losses.If the mechanisms behind the dropout formation can be understood, countermeasures may be developed and applied in order to be able to laser weld thicker plates with full penetration single pass welding. In order to understand the mechanics of the formation of dropout during full penetration welding in 15 mm thick plates, experiments have been conducted using laser hybrid arc welding (LAHW) using the laser in CW mode and also applying power modulation. During the experiments, the root has been observed with High Speed Imaging (HSI) to observe the mechanisms behind the formation. It is determined that the downward flow from the keyhole along with the surface tensional forces of the molten steel and its cooling rate play the most significant roles.

Ort, förlag, år, upplaga, sidor
2015.
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Produktionsutveckling
Identifikatorer
URN: urn:nbn:se:ltu:diva-31008Lokalt ID: 50abbfd2-515f-4b80-894e-1da4622d7b54OAI: oai:DiVA.org:ltu-31008DiVA, id: diva2:1004237
Konferens
The IIW International Conference on High Strength Materials – Challenges and Applications : 02/07/2015 - 03/07/2015
Anmärkning
Godkänd; 2015; 20151127 (jankar)Tillgänglig från: 2016-09-30 Skapad: 2016-09-30 Senast uppdaterad: 2017-11-25Bibliografiskt granskad

Open Access i DiVA

fulltext(2301 kB)1048 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 2301 kBChecksumma SHA-512
ebd657902b817770a8c9f296981d1fc3ae09255a415280b7a5cf2b39cf207753638ffaaa16d6b62c549d06bce26434fba9ec925b743f1c0f3bc41c0630aa9b79
Typ fulltextMimetyp application/pdf

Person

Frostevarg, Jan

Sök vidare i DiVA

Av författaren/redaktören
Frostevarg, Jan
Av organisationen
Produkt- och produktionsutveckling
Bearbetnings-, yt- och fogningsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 1049 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 346 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf