Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Curve sawing effects on board dimensions when rip-sawing with a circular saw blade
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Träteknik.ORCID-id: 0000-0002-0145-080X
Nanjing Forestry University, Faculty of Material Science & Engneering, Nanjing Forestry University.
Nanjing Forestry University, Nanjing Forestry University, Faculty of Material Science & Engneering.
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Träteknik.ORCID-id: 0000-0003-2247-674X
Antal upphovsmän: 42016 (Engelska)Ingår i: Wood Material Science & Engineering, ISSN 1748-0272, E-ISSN 1748-0280, Vol. 11, nr 3, s. 135-141Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Curve sawing means advantages for yield and quality of sawn boards. However, for circular saw machinery deviations of saw kerfs give losses of valuable board volume. Deviations give thinner boards but also slight cupping of the cross sections. Theoretical calculations show that even with moderate (large) curve radii, these saw kerf deviations are typically 0.2–0.6 mm for normal circular saw machinery and Swedish log material. The test sawing reported here was made in order to give experimental values that can be compared to theoretical values. Fifty normal logs and 50 curved with top diameter 236–248 mm were cut with sawing pattern 3X with center boards 51 × 149 mm. The average curve radius of the curved cants that were cut in the resaw was 132 m (bow height 19 mm) and the theoretical saw kerf deviation for this radius is 0.31 mm. The experimental results show that the thickness reduction at the measuring points for curve sawn boards compared to straight sawn boards was in average 0.19 mm to be compared with the theoretical value of 0.20 mm. Cupping was more difficult to measure but results seem to agree well between theory and experiments.

Ort, förlag, år, upplaga, sidor
2016. Vol. 11, nr 3, s. 135-141
Nationell ämneskategori
Annan maskinteknik
Forskningsämne
Träteknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-31222DOI: 10.1080/17480272.2016.1150342ISI: 000375935000003Scopus ID: 2-s2.0-84961218673Lokalt ID: 55774805-e94c-4e3e-b19f-bbb674543cdbOAI: oai:DiVA.org:ltu-31222DiVA, id: diva2:1004452
Anmärkning

Validerad; 2016; Nivå 1; 20160510 (andbra); Konferensartikel i tidskrift

Tillgänglig från: 2016-09-30 Skapad: 2016-09-30 Senast uppdaterad: 2018-07-10Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Ekevad, MatsÖhman, Micael

Sök vidare i DiVA

Av författaren/redaktören
Ekevad, MatsÖhman, Micael
Av organisationen
Träteknik
I samma tidskrift
Wood Material Science & Engineering
Annan maskinteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 354 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf