Change search

Cite
Citation style
• apa
• ieee
• modern-language-association-8th-edition
• vancouver
• Other style
More styles
Language
• de-DE
• en-GB
• en-US
• fi-FI
• nn-NO
• nn-NB
• sv-SE
• Other locale
More languages
Output format
• html
• text
• asciidoc
• rtf
Model for forces on a cutting tooth of a circular saw blade for wood rip sawing
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Wood Science and Engineering.ORCID iD: 0000-0002-0145-080X
Luleå University of Technology, Department of Engineering Sciences and Mathematics.
2011 (English)Conference paper, Poster (with or without abstract) (Refereed)
Abstract [en]

Forces from cutting appear on the front edge and side edges of a straight cutting tooth of a circular saw blade intended for rip sawing of wooden logs. The forces on these three edges add up to a net force on the tooth with three components in the main, normal and lateral directions. Especially the net lateral force is interesting for the stability of a circular saw blade during rip sawing due to the low stiffness of the saw blade in the lateral direction. In this paper, a model for calculating the net force on a cutting tooth is proposed and discussed. The forces on the front cutting edge and the two side cutting edges may for each edge be calculated from literature and experimental data of main and normal forces as a function of cutting parameters such as rake angle, clearance angle, bevel angle, cutting depth and wood cutting direction. The net force is the vectorial sum of the forces on the front and side cutting edges. Thin saw blades cut relatively more with the side edges than thick saw blades for the same cutting depth.A net lateral force appears on the tooth if there are unequal normal forces on the side edges. The reasons for unequal normal forces may be unequal side cutting depths due to a lateral deflection of the saw blade or inhomogenities in the wood material. The net cutting forces from the cutting force model may be applied on the teeth of a mechanical model of the circular saw blade in order to calculate lateral displacements and thus stability of the circular saw blade. Lateral displacement of the saw blade generates unequal side edge cutting forces and thus there is coupling between lateral force and lateral deflection.

2011.
National Category
Other Mechanical Engineering
Wood Technology
Identifiers
Local ID: 8761cbdd-67de-4798-ae6c-3f9ad3fcc368OAI: oai:DiVA.org:ltu-34296DiVA, id: diva2:1007546
Conference
International Wood Machining Seminar : 07/06/2011 - 10/06/2011
Note
Godkänd; 2011; 20110617 (matse)Available from: 2016-09-30 Created: 2016-09-30 Last updated: 2017-11-25Bibliographically approved

Open Access in DiVA

No full text in DiVA

Search in DiVA

By organisation
Wood Science and EngineeringDepartment of Engineering Sciences and Mathematics
On the subject
Other Mechanical Engineering

urn-nbn

Altmetric score

urn-nbn
Total: 735 hits

Cite
Citation style
• apa
• ieee
• modern-language-association-8th-edition
• vancouver
• Other style
More styles
Language
• de-DE
• en-GB
• en-US
• fi-FI
• nn-NO
• nn-NB
• sv-SE
• Other locale
More languages
Output format
• html
• text
• asciidoc
• rtf
v. 2.43.0
| | | |