Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Runner cone boundary layer control
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Strömningslära och experimentell mekanik.ORCID-id: 0000-0001-7599-0895
2007 (engelsk)Inngår i: Proceedings of the 2nd IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems, Timisoara,Romania, October 24-26, 2007 / [ed] R. Susan-Resiga; S. Bernad; S. Muntean, Timişoara, 2007, s. 153-158Konferansepaper, Publicerat paper (Fagfellevurdert)
Abstract [en]

The runner cone plays an essential role in the performance of elbow draft tube and de facto of low head machines. An earlier separation on the runner cone deteriorates the pressure recovery and thus the overall efficiency of the machine. Control of the separation point on the runner cone is therefore of interest to improve efficiency at any regime. Onealternative to control the separation on the runner cone may be to rotate the runner cone with a different angular velocity than the runner blades. In the present work, the effect of runner cone angular rotation on elbow draft tube, typical in Kaplan turbine, is investigated using numerical simulations. The Turbine-99 test case (T-99) is used as benchmark at the top of the propeller curve. Simulations are performed for 4 different angular rotations: -595(stipulated in T-99), 0, +600 and +1200 rpm. The results indicate a delay of the separation on the cone at 0, +600 and +1200 rpm. The mean pressure recovery increases in all cases. The improvement reaches 6.6 % for the mean pressure recovery for an angular velocity of +600 rpm where separation disappear, while the loss factor decreases with 23.6 %.

sted, utgiver, år, opplag, sider
Timişoara, 2007. s. 153-158
Serie
Transaction of Mechanics, Scientific Bulletin of the Politehnica University of Timisoara, Romania, ISSN 1224-6077 ; 52(66)
HSV kategori
Forskningsprogram
Strömningslära
Identifikatorer
URN: urn:nbn:se:ltu:diva-34823Lokal ID: 920beeb0-86f4-11dc-a4a5-000ea68e967bOAI: oai:DiVA.org:ltu-34823DiVA, id: diva2:1008074
Konferanse
IAHR International Meeting of the Workgroup on Cavitation and Dynamic Problems in Hydraulic Machinery and Systems : 24/10/2007 - 26/10/2007
Merknad
Godkänd; 2007; 20071030 (cervante)Tilgjengelig fra: 2016-09-30 Laget: 2016-09-30 Sist oppdatert: 2017-11-25bibliografisk kontrollert

Open Access i DiVA

fulltekst(2455 kB)45 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 2455 kBChecksum SHA-512
33b8230416b23e4787b1bfaf816571b086da08b931de4deb997e84087487e0174963bf3e75961385d617aa96047fdedb4fc2d8f4e01ccc7a8672212811aaea42
Type fulltextMimetype application/pdf

Andre lenker

http://mh.mec.upt.ro/IAHRWG2007

Personposter BETA

Cervantes, Michel

Søk i DiVA

Av forfatter/redaktør
Cervantes, Michel
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 45 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

urn-nbn

Altmetric

urn-nbn
Totalt: 33 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf