Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Impact of laminate directions on inplane shear stiffness of crosslaminated timber
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Träteknologi.ORCID-id: 0000-0002-0900-5110
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Träteknologi.ORCID-id: 0000-0002-0145-080X
Rekke forfattare: 22016 (engelsk)Inngår i: Annual Meeting of the Northern European Network for Wood Science and Engineering WSE,: a key factor on the transition to Bioeconomy, 2016Konferansepaper, Oral presentation with published abstract (Fagfellevurdert)
Abstract [en]

Twenty-three finite element models of cross-laminated timber (CLT) with different laminate directions were studied. Simulations with quadratic orthotropic linear elastic finite elements were conducted. One goal was to compare in-plane shear stiffnesses for CLT blocks made up from Norway Spruce (Picea abies) boards. 3- and 5-layer CLT were studied with board sizes 25x150x1200 mm. Bloc sizes were 75x1200x1200 and 125x1200x1200 mm for 3-layer and 5-layer blocs, respectively. The first and last layers laminate directions were assumed to be in direction 0. The second and fourth layers laminate directions for 5-layer models were assumed equal and were 5, 10, 15, 30, 45, 60, 75 and 90. The middle layer was in direction 0 or 90. For 3-layer models the middle layers laminate directions were 5, 10, 15, 30, 45, 60, 75 and 90. No edge gluing was assumed and thus all side edges were allowed to separate or overlap. Glued contact surfaces were assumed to be perfectly glued with rigid glue. The results for 5-layer models showed that all models with angled second and fourth layers were stiffer than the models with 90 layers. Stiffnesses for models with angled second and fourth layers were higher when the middle layer laminate direction was 90 compared to 0. The stiffest 5-layer model was the one with laminate directions 0/45/90/45/0. This stiffness was 1.5 times the shear stiffness of a reference block with 1-layer and solid timber shear stiffness. The stiffest 3-layer model was the one with laminate directions 0/30/0. This stiffness was 0.99 times the shear stiffness of the reference bloc.

sted, utgiver, år, opplag, sider
2016.
Emneord [en]
Cross laminated timber, CLT, shear stiffness, finite element, FEM
HSV kategori
Forskningsprogram
Träteknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-45312OAI: oai:DiVA.org:ltu-45312DiVA, id: diva2:1019173
Konferanse
12th Annual Meeting of the Northern European Network for Wood Science and Engineering WSE, 12-13 September, 2016, Riga, Latvia
Tilgjengelig fra: 2016-10-04 Laget: 2016-10-04 Sist oppdatert: 2017-11-24bibliografisk kontrollert

Open Access i DiVA

fulltext(2221 kB)253 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 2221 kBChecksum SHA-512
28cf35c4bd11f96ec1f62b9093669bb4db9c26d07613e49bf47df9b5e6b0cc219ebd9d8b2ed7c8b26cc4955faea54200b657eddeae672f855480b748940c2792
Type fulltextMimetype application/pdf

Personposter BETA

Turesson, JonasEkevad, Mats

Søk i DiVA

Av forfatter/redaktør
Turesson, JonasEkevad, Mats
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 253 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

urn-nbn

Altmetric

urn-nbn
Totalt: 425 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf