Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Modeling of Cold Pilgering of Tubes
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Material- och solidmekanik. Luleå University of Technology. (Material Mechanics)
2017 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Cold pilgering is a challenging tube forming process in terms of modeling due to the complexity in kinematic of tools, friction condition and material behavior. The process development has mostly been based on simple formulas and costly full-scale tryouts. The aim in this study is to develop validated Finite element models of cold pilgering to increase the understanding of influence of the process parameters on the produced tubes.

In the course of this thesis, three-dimensional mechanical and thermo-mechanical Finite element models of cold pilgering were developed. The commercial code MSC.Marc was used in the simulations. General 3D models are needed to be able to capture asymmetric deformation in cold pilgering. It was found that tool deflections together with elastic deformation of roll dies have considerable influence on the rolling force. Furthermore, the strain rate and temperature effects on the response of the material and thereby on the rolling force were evaluated.

Ort, förlag, år, upplaga, sidor
Luleå: Luleå university of technology , 2017.
Serie
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757
Nyckelord [en]
Cold pilgering, finite element method, tube forming, tool elasticity, roll flattening
Nationell ämneskategori
Maskinteknik Annan materialteknik
Forskningsämne
Materialmekanik
Identifikatorer
URN: urn:nbn:se:ltu:diva-62941ISBN: 978-91-7583-872-4 (tryckt)ISBN: 978-91-7583-873-1 (digital)OAI: oai:DiVA.org:ltu-62941DiVA, id: diva2:1087526
Presentation
2017-05-31, E130, Luleå tekniska universitet, Luleå, 10:00 (Engelska)
Opponent
Handledare
Tillgänglig från: 2017-04-12 Skapad: 2017-04-07 Senast uppdaterad: 2019-06-04Bibliografiskt granskad
Delarbeten
1. Finite Element Modelling of Cold Pilgering of Tubes
Öppna denna publikation i ny flik eller fönster >>Finite Element Modelling of Cold Pilgering of Tubes
2015 (Engelska)Ingår i: Computational Plasticity XIII: Fundamentals and Applications - Proceedings of the 13th International Conference on Computational Plasticity - Fundamentals and Applications,held in Barcelona, Spain, 1-3 September 2015 / [ed] E. Oñate; D.R.J. Owen; D. Peric; M. Chiumenti, Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2015, s. 716-726Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

Cold pilgering is a cold forming process used during manufacturing of seamless tubes. The tube with a mandrel inside is fed forward and rotated in stepwise increments, while the roll stand moves back and forth. The total plastic deformation of the tube is such that the cross-sectional area of the tube decreases and the length of the tube increases during the process. However, this is performed in many small incremental steps, where the direction of deformation in a material point changes at each stroke. Most published models of cold pilgering use simplified material models. In reality, the flow stress is dependent on temperature, strain rate, strain history and microstructure. In this work, temperature and strain rate distributions are computed, using a 3D thermo-mechanical FE model, and the influence of temperature and strain rate on the rolling force is investigated. The Johnson-Cook model is employed to describe the flow stress using isotropic hardening. The results show that strain rate and temperature have a significant influence on the roll separation force

Ort, förlag, år, upplaga, sidor
Barcelona: International Center for Numerical Methods in Engineering (CIMNE), 2015
Nationell ämneskategori
Annan materialteknik
Forskningsämne
Materialmekanik
Identifikatorer
urn:nbn:se:ltu:diva-40526 (URN)000380573600069 ()2-s2.0-84992261190 (Scopus ID)fb3a73cd-20e7-4301-bd32-362df80d0902 (Lokalt ID)978-84-944244-6-5 (ISBN)fb3a73cd-20e7-4301-bd32-362df80d0902 (Arkivnummer)fb3a73cd-20e7-4301-bd32-362df80d0902 (OAI)
Konferens
International Conference on Computational Plasticity. Fundamentals and Applications : 01/09/2015 - 03/09/2015
Anmärkning

Validerad; 2016; Nivå 1; 2016-10-06 (andbra)

Tillgänglig från: 2016-10-03 Skapad: 2016-10-03 Senast uppdaterad: 2017-11-25Bibliografiskt granskad
2. Finite element modeling of tube deformation during cold pilgering
Öppna denna publikation i ny flik eller fönster >>Finite element modeling of tube deformation during cold pilgering
2016 (Engelska)Ingår i: NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes / [ed] Saanouni, K; Chenot, JL; Duval, JL, 2016, Vol. 80, s. 1-8, artikel-id 15004Konferensbidrag, Publicerat paper (Refereegranskat)
Abstract [en]

A three-dimensional finite element model of cold pilgering of stainless steel tubes is developed in this paper. The objective is to use the model to increase the understanding of forces and deformations in the process. The focus is on the influence of vertical displacements of the roll stand and axial displacements of the mandrel and tube. Therefore, the rigid tools and the tube are supported with elastic springs. Additionally, the influences of friction coefficients in the tube/mandrel and tube/roll interfaces are examined. A sensitivity study is performed to investigate the influences of these parameters on the strain path and the roll separation force. The results show the importance of accounting for the displacements of the tube and rigid tools on the roll separation force and the accumulative plastic strain.

Serie
MATEC Web of conferences, ISSN 2261-236X ; 80
Nationell ämneskategori
Annan materialteknik
Forskningsämne
Materialmekanik
Identifikatorer
urn:nbn:se:ltu:diva-62640 (URN)10.1051/matecconf/20168015004 (DOI)000392331100086 ()2-s2.0-85016095165 (Scopus ID)
Konferens
12th International Conference on Numerical Methods in Industrial Forming Processes (NUMIFORM),Troyes,France, 04-07 July 2016
Tillgänglig från: 2017-03-23 Skapad: 2017-03-23 Senast uppdaterad: 2018-07-10Bibliografiskt granskad
3. Finite Element Analysis of cold pilgering using elastic roll dies
Öppna denna publikation i ny flik eller fönster >>Finite Element Analysis of cold pilgering using elastic roll dies
2017 (Engelska)Ingår i: Procedia Engineering, ISSN 1877-7058, E-ISSN 1877-7058, Vol. 207, s. 2370-2375Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

A finite element model of cold pilgering with elastic roll dies have been developed and used to investigate the influence of roll die deformation on the material flow, contact region, roll separating force and tube dimensions. Full scale experiments were performed to validate the contact surface and tube dimensions. The results show that the influence of roll die flattening is not significant on the contact length. However, elastic deformation of roll die has strong influence on both the wall thickness reduction and roll separating force. Thus it is recommended to consider elasticity of roll dies when forces and tube dimensions are estimated.

Ort, förlag, år, upplaga, sidor
Elsevier, 2017
Nyckelord
cold pilgering, cold forming, tube forming, roll flattening, contact length, roll separating force, finite element method, tool elasticity, tube dimension
Nationell ämneskategori
Teknisk mekanik Annan materialteknik
Forskningsämne
Materialmekanik
Identifikatorer
urn:nbn:se:ltu:diva-62938 (URN)10.1016/j.proeng.2017.10.1010 (DOI)2-s2.0-85036627374 (Scopus ID)
Konferens
International Conference on the Technology of Plasticity, ICTP 2017, Cambridge, United Kingdom, 17-22 September 2017
Anmärkning

Konferensartikel i tidskrift

Tillgänglig från: 2017-04-07 Skapad: 2017-04-07 Senast uppdaterad: 2019-09-12Bibliografiskt granskad

Open Access i DiVA

fulltext(6714 kB)2747 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 6714 kBChecksumma SHA-512
9a7b605497f45ec18b92c27be1ac3c64f6ee68708522287cf75f14356030127b8c7d448685aa18d1e837d16fa997dfb4df1239adba6c8a0725621afff7a57183
Typ fulltextMimetyp application/pdf

Personposter BETA

Azizoğlu, Yağız

Sök vidare i DiVA

Av författaren/redaktören
Azizoğlu, Yağız
Av organisationen
Material- och solidmekanik
MaskinteknikAnnan materialteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 2747 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 588 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf