Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
The beneficiation of tailing of coal preparation plant by heavy-medium cyclone
Department of Mining EngineeringUrmia UniversityUrmiaIran.
Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, Mineralteknik och metallurgi.ORCID-id: 0000-0002-5228-3888
School of Mining EngineeringUniversity of TehranTehranIran.
Department of Mining EngineeringUrmia UniversityUrmiaIran.
Visa övriga samt affilieringar
2018 (Engelska)Ingår i: International journal of coal science & technology, ISSN 2095-8293, Vol. 5, nr 3, s. 374-384Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Dense-medium cyclones have been used for beneficiation of fine particles of coal. In this study, the usability of cyclones in the beneficiation of tailings of a coal preparation plant was investigated. For this purpose, separation tests were conducted using spiral concentrator and heavy medium cyclones with the specific weight of medium 1.3–1.8 (g/cm3) on different grading fractions of tailing in an industrial scale (the weight of tail sample was five tons). Spiral concentrator was utilized to beneficiate particles smaller than 1 mm. In order to evaluate the efficiency of cyclones, sink and float experiments using a specific weight of 1.3, 1.5, 1.7 and 1.9 g/cm3, were conducted on a pilot scale. Based on the obtained results, the recovery of floated materials in cyclones with the specific weight of 1.40, 1.47 and 1.55 g/cm3 are 17.75%, 33.80%, and 50%, respectively. Also, the cut point (ρ50), which is the relative density at which particles report equally to the both products are 1.40, 1.67 and 1.86 g/cm3. The probable errors of separation for defined specific weights for cyclones are 0.080, 0.085 and 0.030, respectively. Also, the coefficients of variation was calculated to be 0.20, 0.12 and 0.03. Finally, it could be said that the performance of a cyclone with a heavy medium of 1.40 g/cm3 specific weight is desirable compared with other specific weights.

Ort, förlag, år, upplaga, sidor
Springer, 2018. Vol. 5, nr 3, s. 374-384
Nationell ämneskategori
Metallurgi och metalliska material
Forskningsämne
Mineralteknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-71162DOI: 10.1007/s40789-018-0221-6Scopus ID: 2-s2.0-85054699820OAI: oai:DiVA.org:ltu-71162DiVA, id: diva2:1254633
Tillgänglig från: 2018-10-09 Skapad: 2018-10-09 Senast uppdaterad: 2018-12-04Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Sök vidare i DiVA

Av författaren/redaktören
Ghorbani, Yousef
Av organisationen
Mineralteknik och metallurgi
Metallurgi och metalliska material

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 80 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf