Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
An experimental investigation of the effects of diode laser surface hardening of AISI 410 stainless steel and comparison with furnace hardening heat treatment
Department of Mechanical Engineering, Faculty of Engineering, Malayer University, Malayer, Iran. Laser Materials Processing Research CentreMalayer University, Malayer, Iran.
Department of Mechanical Engineering, Faculty of Engineering, Malayer University, Malayer, Iran. Laser Materials Processing Research CentreMalayer University, Malayer, Iran.
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Product and Production Development.ORCID iD: 0000-0002-3569-6795
2019 (English)In: Journal of the Brazilian Society of Mechanical Sciences and Engineering, ISSN 1678-5878, E-ISSN 1806-3691, Vol. 41, no 10, article id 434Article in journal (Refereed) Published
Abstract [en]

This study investigated the ability of the continuous wave diode laser surface hardening of AISI 410 martensitic stainless steel with a maximum power of 1600 W. Variable process parameters scanning speed (4–7 mm/s), laser power (1200–1600 W) and stand-off distance (65–75 mm) were considered in this study. Microhardness, the geometry of hardened layer (depth and width), microhardness deviation from the base metal microhardness (MHD), microstructure analysis of the laser-hardened zone through optical microscopy and field emission scanning electron microscopy and percentage of the ferrite phase in AISI 410 microstructure by using Clemex software were considered as process output responses. Results confirmed that by increasing the laser power and reducing the scanning speed, the surface hardness and the depth of hardness increase. It is also revealed the width of the hardened area increases by enhancing stand-off distance and reducing the laser power. Maximum hardness of 630 HV0.3 with 2.2 mm depth is obtained. Also, the furnace hardening heat treatment is compared with the laser hardening process. Microstructure, microhardness, and impact tests of the two processes are compared. Results showed that the hardness of the diode laser is 1.4 times the hardness of the furnace hardening heat treatment.

Place, publisher, year, edition, pages
Springer, 2019. Vol. 41, no 10, article id 434
Keywords [en]
Laser surface hardening, Diode laser, Microhardness, AISI 410 martensitic stainless steel, Microhardness deviation
National Category
Manufacturing, Surface and Joining Technology
Research subject
Manufacturing Systems Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-76247DOI: 10.1007/s40430-019-1925-2ISI: 000486507800004Scopus ID: 2-s2.0-85073070504OAI: oai:DiVA.org:ltu-76247DiVA, id: diva2:1357915
Note

Validerad;2019;Nivå 2;2019-10-04 (johcin)

Available from: 2019-10-04 Created: 2019-10-04 Last updated: 2019-10-21Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus

Authority records BETA

Kaplan, Alexander

Search in DiVA

By author/editor
Kaplan, Alexander
By organisation
Product and Production Development
In the same journal
Journal of the Brazilian Society of Mechanical Sciences and Engineering
Manufacturing, Surface and Joining Technology

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 4 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf