Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Acceleration of metal drops in a laser beam
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Produkt- och produktionsutveckling.ORCID-id: 0000-0002-0649-0130
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Produkt- och produktionsutveckling.ORCID-id: 0000-0003-0194-9018
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Produkt- och produktionsutveckling.ORCID-id: 0000-0003-4265-1541
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Produkt- och produktionsutveckling.ORCID-id: 0000-0002-3569-6795
2021 (Engelska)Ingår i: Applied Physics A: Materials Science & Processing, ISSN 0947-8396, E-ISSN 1432-0630, Vol. 127, nr 1, artikel-id 4Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Different processes require the detachment of metal drops from a solid material using a laser beam as the heat source, for instance laser drop generation or cyclam. These techniques imply that the drops enter the laser beam, which might affect their trajectory. Also, many laser processes such as laser welding or additive manufacturing generate spatters that can be accelerated by the laser beam during flight and create defects on the material. This fundamental study aims at investigating the effects of a continuous power laser beam on the acceleration of intentionally detached drops and unintentionally detached spatters. Two materials were studied: 316L steel and AlSi5 aluminium alloy. High-speed imaging was used to measure the position of the drops and calculate their acceleration to compare it to theoretical models. Accelerations up to 11.2 g could be measured. The contributions of the vapor pressure, the recoil pressure, and the radiation pressure were investigated. The recoil pressure was found to be the main driving effect but other phenomena counteract this acceleration and reduce it by an order of magnitude of one to two. In addition, two different vaporization regimes were observed, resulting respectively in a vapor plume and in a vapor halo around the drop.

Ort, förlag, år, upplaga, sidor
Springer, 2021. Vol. 127, nr 1, artikel-id 4
Nyckelord [en]
Laser ablation propulsion, Laser drop generation, Recoil pressure, Ablation pressure, Spatters trajectory
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Produktionsutveckling
Identifikatorer
URN: urn:nbn:se:ltu:diva-82252DOI: 10.1007/s00339-020-04177-yISI: 000599501100001Scopus ID: 2-s2.0-85097611880OAI: oai:DiVA.org:ltu-82252DiVA, id: diva2:1516048
Projekt
LAM-4DSYMAXSAMOAC3TS
Forskningsfinansiär
Vinnova, 2018-04324Interreg Nord, 20201279
Anmärkning

Validerad;2021;Nivå 2;2021-01-11 (johcin);

Finansiär: SYMAX (2019-02458) EIT Raw Materials, project SAMOA (18079);

For correction, see: Da Silva, A., Volpp, J., Frostevarg, J. et al. Correction: Acceleration of metal drops in a laser beam. Appl. Phys. A 129, 637 (2023). https://doi.org/10.1007/s00339-023-06853-1

Tillgänglig från: 2021-01-11 Skapad: 2021-01-11 Senast uppdaterad: 2023-09-04Bibliografiskt granskad
Ingår i avhandling
1. Laser-induced recoil pressure on metal drops and powder particles
Öppna denna publikation i ny flik eller fönster >>Laser-induced recoil pressure on metal drops and powder particles
2021 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Additive Manufacturing became a major research topic and part of industrial production in the past years. Numerous techniques now allow to build 3D structures with a wide choice of materials. When it comes to processing of metals, a laser beam is often used as a heat source to melt either a wire or powder, where the trajectory of spatters and powder particles can be affected by the laser beam radiation. Laser beam irradiation is partly absorbed by the material, and is then converted to heat, which can cause melting and even vaporization. The vaporization of material induces a recoil pressure on the melt pool, which affects its geometry and dynamics. However, the effects of the recoil pressure on airborne objects such as drops and powder particles are still relatively unknown. Their different sizes and boundary conditions compared to a melt pool might affect their behaviour under high laser beam radiation. 

Therefore, this thesis aims at better understanding the effects of the recoil pressure on metal drops and powder particles, as well as their impacts on Additive Manufacturing processes, especially Directed Energy Deposition and Laser Metal Wire Deposition. In the three adjoined papers, high-speed imaging was used to observe (i) powder blown through a laser beam, (ii) drops falling in a laser beam, and (iii) drops detaching from a wire in a laser beam. The videos enabled to calculate the acceleration of powder particles and drops of different sizes, the density map of the powder stream, and the detachment direction of the drops. The experimental results were completed with theoretical calculations of thermodynamics, recoil pressure and surface tension. 

These studies allowed to conclude that the acceleration induced by the recoil pressure on a drop or a powder particle increases with decreased size. Moreover, the recoil pressure causes a slight deviation of the powder stream in Directed Energy Deposition that can induce a better powder focusing. The recoil pressure can also cause the disintegration of powder particles in the laser beam. Finally, it was shown that the recoil pressure can be used to detach drops on demand from a wire and accelerate them towards the substrate where they can be strategically deposited for building additive structures.

Ort, förlag, år, upplaga, sidor
Luleå University of Technology, 2021
Serie
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757
Nationell ämneskategori
Bearbetnings-, yt- och fogningsteknik
Forskningsämne
Produktionsutveckling
Identifikatorer
urn:nbn:se:ltu:diva-83629 (URN)978-91-7790-817-3 (ISBN)978-91-7790-818-0 (ISBN)
Presentation
2021-06-08, A109, Luleå tekniska Universitet, Luleå, 09:00 (Engelska)
Opponent
Handledare
Tillgänglig från: 2021-04-14 Skapad: 2021-04-13 Senast uppdaterad: 2021-11-02Bibliografiskt granskad
2. Aspects of material and heat transfer in drop- and powder-based laser additive manufacturing
Öppna denna publikation i ny flik eller fönster >>Aspects of material and heat transfer in drop- and powder-based laser additive manufacturing
2023 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Additive Manufacturing became a major research topic and part of industrial production in the past years. Numerous techniques now allow to build 3D structures with a wide choice of materials. When it comes to processing of metals, a laser beam is often used as a heat source to melt either a wire or powder. Novel approaches of material deposition are also developed, such as Laser Droplet Generation, which could potentially be applied to Additive Manufacturing. During the process, the laser beam light is partly absorbed by the material, and is then converted to heat, which can induce melting and even vaporization. Additive Manufacturing presents several processing challenges, such as the recoil pressure acting on the drops and powder particles that affects their trajectory. Storage and recycling of the powders is also an important aspect since the powder properties are changed through aging. Another challenge is the adjustment of process parameters according to varying deposition conditions, where the use of process monitoring techniques is crucial.

Therefore, this thesis aims at better understanding (i) the effects of recoil pressureon metal drops and powder particles, (ii) powder aging and its effects on the process, and (iii) process optimisation and stability via monitoring. In the six adjoined papers, high-speed imaging and thermal imaging were used to observe laser Additive Manufacturing processes involving both metal drops and powders. The videos enabled to observe drop detachments, measure trajectories, plot powder density maps, quantify powder catchment in the melt pool, measure themelt pool geometry, detect oxides, and extract cooling rates. The experimental results were supplemented with material analysis and theoretical calculations of thermodynamics, recoil pressure and surface tension.

These studies allowed to conclude that the recoil pressure induced by laser irradiation on a drop or a powder particle can have some significant effect such as acceleration, change of trajectory, or disintegration. However, these effects seem to be considerably lower than what theoretical models predict. It was also found that the recoil pressure can be used to accurately detach drops from a wire, which was utilised as a new material deposition method for Additive Manufacturing. In Directed Energy deposition, it was showed that aging of the aluminium powder feedstock should be avoided since it induces high porosity, high dilution and decreased mechanical properties. Finally, to guarantee a defect-free deposition during the whole process, it was demonstrated that a thermal camera can be used to monitor the melt pool size, which allows to apply appropriate laser power adjustments to compensate for changing building conditions.  

Ort, förlag, år, upplaga, sidor
Luleå: Luleå University of Technology, 2023
Serie
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
Nationell ämneskategori
Produktionsteknik, arbetsvetenskap och ergonomi
Forskningsämne
Produktionsutveckling
Identifikatorer
urn:nbn:se:ltu:diva-95798 (URN)978-91-8048-280-6 (ISBN)978-91-8048-281-3 (ISBN)
Disputation
2023-05-03, E632, Luleå tekniska universitet, Luleå, 09:00 (Engelska)
Opponent
Handledare
Tillgänglig från: 2023-03-07 Skapad: 2023-03-07 Senast uppdaterad: 2023-09-01Bibliografiskt granskad

Open Access i DiVA

fulltext(1263 kB)299 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 1263 kBChecksumma SHA-512
01537fd19f6a93e31cfa571b78c2806214deb3dea727937ef3c3c2a7ddc655b00045a744b9c142313ac58bd30fa39082215c71928a35a8f91dc98a2d197ba051
Typ fulltextMimetyp application/pdf

Övriga länkar

Förlagets fulltextScopus

Person

Da Silva, AdrienVolpp, JoergFrostevarg, JanKaplan, Alexander F.H

Sök vidare i DiVA

Av författaren/redaktören
Da Silva, AdrienVolpp, JoergFrostevarg, JanKaplan, Alexander F.H
Av organisationen
Produkt- och produktionsutveckling
I samma tidskrift
Applied Physics A: Materials Science & Processing
Bearbetnings-, yt- och fogningsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 299 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 545 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf