Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Conductive Regenerated Cellulose Fibers for Multi-Functional Composites: Mechanical and Structural Investigation
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Materialvetenskap.ORCID-id: 0000-0001-5550-2962
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Materialvetenskap.ORCID-id: 0000-0002-5210-4341
High Throughput Multidisciplinary Research Laboratory, Mohammed VI Polytechnic University (UM6P), Lot 660—Hay Moulay Rachid, 43150 Benguerir, Morocco.
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Maskinelement.ORCID-id: 0000-0001-8676-8819
Visa övriga samt affilieringar
2021 (Engelska)Ingår i: Materials, ISSN 1996-1944, E-ISSN 1996-1944, Vol. 14, nr 7, artikel-id 1746Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Regenerated cellulose fibers coated with copper via electroless plating process are investigated for their mechanical properties, molecular structure changes, and suitability for use in sensing applications. Mechanical properties are evaluated in terms of tensile stiffness and strength of fiber tows before, during and after the plating process. The effect of the treatment on the molecular structure of fibers is investigated by measuring their thermal stability with differential scanning calorimetry and obtaining Raman spectra of fibers at different stages of the treatment. Results show that the last stage in the electroless process (the plating step) is the most detrimental, causing changes in fibers’ properties. Fibers seem to lose their structural integrity and develop surface defects that result in a substantial loss in their mechanical strength. However, repeating the process more than once or elongating the residence time in the plating bath does not show a further negative effect on the strength but contributes to the increase in the copper coating thickness, and, subsequently, the final stiffness of the tows. Monitoring the changes in resistance values with applied strain on a model composite made of these conductive tows show an excellent correlation between the increase in strain and increase in electrical resistance. These results indicate that these fibers show potential when combined with conventional composites of glass or carbon fibers as structure monitoring devices without largely affecting their mechanical performance.

Ort, förlag, år, upplaga, sidor
Basel, Switzerland: MDPI, 2021. Vol. 14, nr 7, artikel-id 1746
Nyckelord [en]
regenerated cellulose fibers (RCFs), electroless copper plating, conductive cellulose fibers, mechanical properties, molecular structure, functional composites
Nationell ämneskategori
Kompositmaterial och -teknik
Forskningsämne
Polymera kompositmaterial; Maskinelement; Cyberfysiska system; Experimentell fysik
Identifikatorer
URN: urn:nbn:se:ltu:diva-83555DOI: 10.3390/ma14071746ISI: 000638717200001PubMedID: 33916305Scopus ID: 2-s2.0-85104353403OAI: oai:DiVA.org:ltu-83555DiVA, id: diva2:1543079
Forskningsfinansiär
Stiftelsen för internationalisering av högre utbildning och forskning (STINT), IB2017-7389Europeiska regionala utvecklingsfonden (ERUF)Interreg Nord
Anmärkning

Validerad;2021;Nivå 2;2021-04-12 (alebob)

Tillgänglig från: 2021-04-09 Skapad: 2021-04-09 Senast uppdaterad: 2022-04-08Bibliografiskt granskad
Ingår i avhandling
1. Multifunctionality and Durability of Cellulosic Fiber Reinforced Polymer Composites
Öppna denna publikation i ny flik eller fönster >>Multifunctionality and Durability of Cellulosic Fiber Reinforced Polymer Composites
2022 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Alternativ titel[sv]
Multifunktionalitet och beständighet hos cellulosabaserade fiberkompositer
Abstract [en]

The overall objective of this thesis is to develop and evaluate cellulose-based fiber composites with added multifunctionality for advanced applications. In the strive towards sustainable societies and industries, materials as well as production processes need to be assessed against the sustainability criteria and selected accordingly. Cellulosic fibers reinforced polymer composites are being increasingly used in applications where weight saving, and environmental friendliness is as important as structural performance. Nonetheless, these materials have their limitations regarding durability and stability of the properties, but their potential in use for advanced applications can be expanded if functionalized and considered beyond their structural performance. Such multi-functionality of composites can be achieved by the coating of fibers and/or modifying the matrix with functional reinforcement, or by both of these routes combined. Coating of fibers and modifying the matrix with nano-reinforcement are two selected approaches for imparting functionality to the cellulosic fiber composites in the current study. 

Conductive Regenerated Cellulose Fibers (RCFs) were produced by coating commercial RCFs with copper via electroless plating process. Electrical conductivity and mechanical performance were evaluated, and the coated fibers were transformed into an embedded strains sensor-like assembly that could be used as structural health monitoring system in composites structures. A noticeable degradation in the mechanical strength of fibers was realized and it was attributed to the influence of the chemicals of the final plating step of process on the chains of cellulose as well as the loss of crystalline order in the RCF. 

In order to obtain modified matrix (nanocomposites) for multifunctional wood polymer composites (WPC), the commercial masterbatches based on Graphene Nanoplatelets (GNPs) were utilized by melt extrusion process. Effect of the processing parameters in terms of change in screw configurations and the change in composition of the constituents on the structure and mechanical performance of the nanocomposites was studied.  Results showed that there is insignificant effect of the change in the screw configuration in comparison with the effect of increasing the content of the GNPs. Stronger shear forces did not result in better dispersion of the nanoparticles. Addition of the compatibilizer, on the other hand, resulted in an adverse effect on the properties compared to the formulations where it is absent. The use of GNPs with larger aspect ratio resulted in much better improvement in the mechanical performance. Addition of the nanoparticles did not only improve mechanical performance but also resulted in increased thermal conductivity and diffusivity, especially when micro-scale reinforcement was added because of synergy between wood fibers and the GNPs. This synergy was reflected also in the significant 99% improved wear resistance and the >80% reduction in the creep strains of wood and graphene reinforced composites. 

During the design and selection of materials, quasi-static properties are often used as a selection criterion. However, in reality structures in use are often loaded during lengthy periods of time which are followed by multiple steps of unloading/reloading, depending on the service conditions.  In such cases their time-dependent response becomes more crucial than instantaneous mechanical response. Typically, characterization of these properties requires a lot of time, but it may be significantly shortened if proper modeling and analysis are employed. The effect of addition of GNPs to the polymer and wood composites has been studied experimentally by short term creep tests. The materials showed highly nonlinear response even at very low loading stresses, but the addition of the nanoparticles resulted in a decrease in the nonlinearity and in the irreversible strains due to plasticity. Modelling approaches have been used to extract parameters from experimental data that could be used in predicting long term performance using Zapas model for viscoplasticity and Schapery’s model for nonlinear viscoelasticity. 

Overall, the results of the performed work contribute to enriching the research field with the potential the bio-based composites have to offer in the advanced application and how nano-scale reinforcement can interact synergistically with the micro-sized fibers to improve the overall performance of WPC and under different loading scenarios.  

Ort, förlag, år, upplaga, sidor
Luleå University of Technology, 2022
Serie
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
Nationell ämneskategori
Kompositmaterial och -teknik
Forskningsämne
Polymera kompositmaterial
Identifikatorer
urn:nbn:se:ltu:diva-90138 (URN)978-91-8048-057-4 (ISBN)978-91-8048-058-1 (ISBN)
Disputation
2022-06-09, E632, Universitetsområdet Porsön, Luleå, 12:30 (Engelska)
Opponent
Handledare
Tillgänglig från: 2022-04-08 Skapad: 2022-04-08 Senast uppdaterad: 2022-05-19Bibliografiskt granskad

Open Access i DiVA

fulltext(4260 kB)204 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 4260 kBChecksumma SHA-512
34154bf63fb1f24663362b19feecc7965a4f5e572d45d53960c8a187ab0be9420d657fa6903ca2b9914f184861421401e504943e541ca0e094f92290347c8357
Typ fulltextMimetyp application/pdf

Övriga länkar

Förlagets fulltextPubMedScopus

Person

Al-Maqdasi, ZainabJoffe, RobertsEmami, NazaninChouhan, Shailesh SinghLandström, Anton

Sök vidare i DiVA

Av författaren/redaktören
Al-Maqdasi, ZainabJoffe, RobertsEmami, NazaninChouhan, Shailesh SinghLandström, Anton
Av organisationen
MaterialvetenskapMaskinelementEISLAB
I samma tidskrift
Materials
Kompositmaterial och -teknik

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 214 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

doi
pubmed
urn-nbn

Altmetricpoäng

doi
pubmed
urn-nbn
Totalt: 326 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf