Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effect of basicity on chromium partition in CaO-MgO-SiO2-Cr 2O3 synthetic slag at 1873 K
Department of Materials Science and Engineering, Royal Institute of Technology, Division of Materials Process Science, Royal Institute of Technology (KTH).
Division of Materials Process Science, Royal Institute of Technology (KTH).
Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, Mineralteknik och metallurgi.
2014 (engelsk)Inngår i: Transactions of the Institution of Mining and Metallurgy Section C - Mineral Processing and Extractive Metallurgy, ISSN 0371-9553, E-ISSN 1743-2855, Vol. 123, nr 2, s. 116-122Artikkel i tidsskrift (Fagfellevurdert) Published
Abstract [en]

The objective of the present work is to get an understanding of the phase relationships in the CaO-MgO-SiO2-Cr2O3 system with a view to control the precipitation of Cr-spinel in the slag phase. The equilibrium phases in CaO-MgO-SiO2-Cr2O3 slag system at 1873 K (1600°C) have been investigated experimentally and compared with the results from thermodynamic calculations. The Cr2O 3 and MgO contents in the slag were fixed at 6 and 8 wt-% respectively. The basicity (CaO/SiO2) of slag was varied in the range 1·0-2·0. A gas/slag equilibrium technique was adopted to synthesise the slag at a high temperature in air. The samples were heated to and soaked at 1873 K (1600°C) for 24 h in order to achieve the equilibrium state and subsequently quenched in water. The chromium distribution and phase compositions in the quenched slag were studied using scanning electron microscope wavelength dispersive spectroscopy and X-ray diffraction techniques. FactSage software was used for the phase equilibrium calculations. The experimental results obtained from the present work were compared with the calculation results from FactSage software. It was found that the spinel formation at 1873 K (1600°C) is favoured in the slag basicity range 1·0-1·4

sted, utgiver, år, opplag, sider
2014. Vol. 123, nr 2, s. 116-122
HSV kategori
Forskningsprogram
Processmetallurgi
Identifikatorer
URN: urn:nbn:se:ltu:diva-4406DOI: 10.1179/1743285513Y.0000000038Scopus ID: 2-s2.0-84901700588Lokal ID: 25b5e430-f00a-4ed4-aec2-ed6ab66d5c40OAI: oai:DiVA.org:ltu-4406DiVA, id: diva2:977279
Merknad
Validerad; 2014; 20140616 (johsod)Tilgjengelig fra: 2016-09-29 Laget: 2016-09-29 Sist oppdatert: 2018-07-10bibliografisk kontrollert

Open Access i DiVA

Fulltekst mangler i DiVA

Andre lenker

Forlagets fulltekstScopus

Personposter BETA

Björkman, Bo

Søk i DiVA

Av forfatter/redaktør
Björkman, Bo
Av organisasjonen
I samme tidsskrift
Transactions of the Institution of Mining and Metallurgy Section C - Mineral Processing and Extractive Metallurgy

Søk utenfor DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric

doi
urn-nbn
Totalt: 171 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf