Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Glulam members strengthened by carbon fibre reinforcement
Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, Byggkonstruktion och -produktion.ORCID-id: 0000-0002-5907-7788
2007 (Engelska)Ingår i: Materials and Structures, ISSN 1359-5997, E-ISSN 1871-6873, Vol. 40, nr 1, s. 47-56Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Glulam members often become large in cross section where heavy loads should be carried. In some applications this may cause problems if limitations on height are posed. A possible solution is to reinforce the member by e.g. bonding fibre reinforced polymer (FRP) on the beams or between the glulam lamellas. The aim of this paper is to investigate the possibility of strengthening glulam beams by the use of pultruded rectangular carbon fibre rods and to establish the anchoring length for this system. Tests were performed in three different series completed by a reference series, 10 specimens altogether. All tests were performed as short-term experiments in four-point bending. The experimental results were compared to analytical models in several aspects. The overall capacity of the beam was established using an analogy with concrete beams. Special attention was made to establishing the anchoring length of the reinforcement bar, since this is governing to avoid premature failures. The anchorage length was tested and an analytical model established. The agreement between the analytical critical anchoring length and the test result was satisfactory. The proposed reinforcement method increased the short-term flexural load-carrying capacity by 49-63% on average.

Ort, förlag, år, upplaga, sidor
2007. Vol. 40, nr 1, s. 47-56
Nationell ämneskategori
Husbyggnad
Forskningsämne
Träbyggnad
Identifikatorer
URN: urn:nbn:se:ltu:diva-9822DOI: 10.1617/s11527-006-9119-7ISI: 000243585800006Scopus ID: 2-s2.0-34548237635Lokalt ID: 882b68e0-d893-11db-a1bf-000ea68e967bOAI: oai:DiVA.org:ltu-9822DiVA, id: diva2:982760
Anmärkning
Validerad; 2007; 20061222 (ysko)Tillgänglig från: 2016-09-29 Skapad: 2016-09-29 Senast uppdaterad: 2018-08-07Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextScopus

Personposter BETA

Johnsson, HelenaBlanksvärd, ThomasCarolin, Anders

Sök vidare i DiVA

Av författaren/redaktören
Johnsson, HelenaBlanksvärd, ThomasCarolin, Anders
Av organisationen
Byggkonstruktion och -produktion
I samma tidskrift
Materials and Structures
Husbyggnad

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 39 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf