Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Fragmentation by blasting through precise initiation: Full scale trials at the Aitik Copper mine
Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, Geoteknologi.ORCID-id: 0000-0001-8564-3694
Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, Geoteknologi.ORCID-id: 0000-0002-8024-435X
Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, Geoteknologi.ORCID-id: 0000-0002-5165-4229
Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, Geoteknologi.
Visa övriga samt affilieringar
2014 (Engelska)Ingår i: Blasting and Fragmentation, ISSN 1937-6359, Vol. 8, nr 2, s. 87-100Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Fragmentation is an important factor for improving downstream processes in mine operations. Six trials have been conducted at the Aitik copper mine to investigate the effect of ultra-short inter-hole delay times, i.e. smaller than 1 ms/m of burden, on fragmentation. Swelling, MWD data and crusher efficiency were also evaluated for trials. According to the results, the effect of examined short inter-hole delay times, i.e. 0.14 to 0.86 ms/m of burden, on fragmentation was found to be marginal. Delay time of 0.43 ms/m of burden resulted in slightly finer fragmentation and larger swell; however, the effect of short delays was overshadowed by the effect of small variations in specific charge.

Ort, förlag, år, upplaga, sidor
2014. Vol. 8, nr 2, s. 87-100
Nyckelord [en]
Civil engineering and architecture - Geoengineering and mining engineering
Nyckelord [sv]
Samhällsbyggnadsteknik och arkitektur - Geoteknik och gruvteknik
Nationell ämneskategori
Annan samhällsbyggnadsteknik
Forskningsämne
Gruv- och Berganläggningsteknik
Identifikatorer
URN: urn:nbn:se:ltu:diva-11503Lokalt ID: a7e1e547-49e7-46d1-9ce9-70fe7168f052OAI: oai:DiVA.org:ltu-11503DiVA, id: diva2:984453
Anmärkning
Validerad; 2015; Nivå 1; 20150127 (nikpet)Tillgänglig från: 2016-09-29 Skapad: 2016-09-29 Senast uppdaterad: 2018-05-28Bibliografiskt granskad
Ingår i avhandling
1. On the Operational Efficiency in Open Pit Mines
Öppna denna publikation i ny flik eller fönster >>On the Operational Efficiency in Open Pit Mines
2016 (Engelska)Licentiatavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

Open pit mines constitute more than half of global minerals production. Yet most of the large, high-grade, and close to the surface deposits have been depleted or are currently in production. Besides, volatility in commodity prices and stringent environmental regulations limit the up-scaling expansions in large open pits. Consequently, the mines are determined to increase their operational efficiency in order to thrive. This has recently led to major metallurgical improvements in the processing of ores; whereas the improvements in mining of the said ores are relatively overdue in terms of efficiency and technological advancement. This thesis concentrates on the mining activities and their efficiency in open pits with a focus on drilling, blasting, loading, and crushing. As all of these tasks revolve around the fragmentation of run-of-mine ore, their relationships and efficiencies are explored within the context of fragmentation.

Fragmentation is a result of complex interactions between rockmass, blasting geometry, explosive, and timing sequence of blast holes. The influence of rockmass and timing sequence on fragmentation and efficiency are explored, as well as the target fragmentation for efficient loading and crushing. Moreover, the techniques for measuring fragmentation are evaluated as to whether they can benefit mines in terms of efficiency. As the circumstances in open pits are essentially site-specific, these issues are addressed as a case study of the Aitik mine in Sweden.

The research comprised four elements. First, the influence of rockmass fractures on blast results and downstream efficiency was evaluated via full-scale field trials. The fractures in and around the case study mine were mapped using a photogrammetric technique and six production blasts were adapted to the major fracture sets to evaluate the effect of initiation direction on downstream efficiency. Second, the influence of the timing sequence of blast holes was explored within the theories of stress waves interaction and their consequent effect on fragmentation. Theoretical and numerical solutions were accompanied by six field trials in full-scale to evaluate the influence of short delay times on fragmentation and efficiency. Third, an empirical study was conducted to correlate fragmentation to the efficiency of loading and crushing; this was done to define a target fragmentation for the studied case. Finally, the techniques to assess fragmentation were discussed both quantitatively and qualitatively.

The findings indicated that rockmass fractures have a significant influence on the quality of blasts and efficiency of downstream tasks. In the case study mine, adjustments to orientation of drill pattern and initiation direction of blasts suggested that careful experimentation in this regard can yield a favourable initiation direction with respect to existing discontinuities. Finer fragmentation and higher loading efficiencies can be achieved by adapting the blast designs to the existing fractures, which can lead to significant savings in the long run. On the contrary, the influence of stress waves interaction on blast results turned out to be marginal. Neither the theoretical and numerical solutions nor the field trials showed any significant improvements in blast results from short delays. In fact, it was found rather implausible to expect any noticeable improvements by using short delays.

The empirical method to evaluate target fragmentation proved useful as well. It was shown that by incorporating different data from various sources in a mine, one can follow the ore from muckpile to loaders and then to crushers. Having a qualitative understanding of the fragmentation, and by developing tools to measure efficiency, one can estimate what fragmentation is most favourable for an efficient operation. Finally, two image-based methods to assess fragmentation were discussed in terms of repeatability and statistical significance. It was found that the scatter in both methods is rather large, introducing a certain ambiguity in representativeness of their results. Admittedly, it was found that in matters of long-term efficiency, the number, size and representativeness of assessed samples are of more importance compared to the accuracy of individual measurements.

Ort, förlag, år, upplaga, sidor
Luleå: , 2016. s. 60
Serie
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757
Nationell ämneskategori
Annan samhällsbyggnadsteknik
Forskningsämne
Gruv- och Berganläggningsteknik
Identifikatorer
urn:nbn:se:ltu:diva-59524 (URN)978-91-7583-698-0 (ISBN)978-91-7583-699-7 (ISBN)
Presentation
2016-11-10, F1031, Luleå, 10:00
Opponent
Handledare
Forskningsfinansiär
VINNOVA, 1833218
Tillgänglig från: 2016-10-06 Skapad: 2016-10-05 Senast uppdaterad: 2017-11-24Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Personposter BETA

Petropoulos, NikolaosBeyglou, AliJohansson, DanielNyberg, UlfNovikov, Evgeny

Sök vidare i DiVA

Av författaren/redaktören
Petropoulos, NikolaosBeyglou, AliJohansson, DanielNyberg, UlfNovikov, Evgeny
Av organisationen
Geoteknologi
I samma tidskrift
Blasting and Fragmentation
Annan samhällsbyggnadsteknik

Sök vidare utanför DiVA

GoogleGoogle Scholar

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 1255 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf