Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Material characterisation for simulation of press hardening
2004 (engelsk)Licentiatavhandling, med artikler (Annet vitenskapelig)
Abstract [en]

The growing effort to reduce vehicle weight and improve passive safety in the automotive industry has drastically increased the demand for ultra high strength steel components. There exist several production methods for such components, where the press hardening technique (hot stamping) is one of the most successful in producing complex components from boron steel. In order to accurately perform numerical Finite Element (FE) simulations of the actual thermo-mechanical forming, it is crucial to use correct material data and models. This work is focusing on two main aspects of the material characterisation as follows. The first is the flow stress of the austenite at elevated temperatures and different strain rates, relevant for the process, which is crucial for correctly predicting the strains in the component and the forming force. During a press hardening cycle, the actual forming is performed at high temperatures and the steel is in the austenitic state. The second, the austenite decomposition into daughter products such as ferrite, pearlite, bainite or martensite is a function of the thermal and mechanical history. To find the mechanical response (flow stress) for the austenite, a method based on multiple overlapping continuous cooling and compression tests (MOCCCT) in combination with inverse modelling has been developed. A validation test (in combination with the compression tests) shows good agreement with the simulated forming force, indicating that the estimated flow stress as a function of temperature, strain and strain rate is accurate in the actual application. The austenite decomposition model is developed and integrated as a material subroutine into the FE-code LS-DYNA. The model is based on the combined nucleation and growth rate equations proposed by Kirkaldy. A separate test to simulate different cooling histories along a boron alloyed steel sheet has been conducted.

sted, utgiver, år, opplag, sider
Luleå: Luleå tekniska universitet, 2004. , s. 9
Serie
Licentiate thesis / Luleå University of Technology, ISSN 1402-1757 ; 2004:28
HSV kategori
Forskningsprogram
Hållfasthetslära
Identifikatorer
URN: urn:nbn:se:ltu:diva-17533Lokal ID: 3d7ad4a0-aee7-11db-803d-000ea68e967bOAI: oai:DiVA.org:ltu-17533DiVA, id: diva2:990538
Merknad
Godkänd; 2004; 20070128 (ysko)Tilgjengelig fra: 2016-09-29 Laget: 2016-09-29 Sist oppdatert: 2017-11-24bibliografisk kontrollert

Open Access i DiVA

fulltekst(28118 kB)161 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 28118 kBChecksum SHA-512
6b23623429b8f87d3dbfbc66885f3dbc51fe60b7d7838bd328d2406f68d6376056be62f0f9ea99f7cae8f9b6501c1ca621cf02cf3fe9982acfa585b1f8862f1d
Type fulltextMimetype application/pdf

Personposter BETA

Åkerström, Paul

Søk i DiVA

Av forfatter/redaktør
Åkerström, Paul

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 161 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

urn-nbn

Altmetric

urn-nbn
Totalt: 134 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf