Endre søk
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Development and characteristics of a fully recycled CF/PP composite
Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, Materialvetenskap.
2011 (engelsk)Doktoravhandling, med artikler (Annet vitenskapelig)
Abstract [en]

The increasing industrial use of carbon fibre in e.g. aircraft and wind turbines calls for strategies for their recovery and possible reuse. In addition, tremendous amount of energy is needed to be able to manufacture pristine carbon fibres. In this work, an engineering composite material was manufactured from recyclates. Processing scrap from PURE was extensively studied in terms of its stability and processability as a thermoplastic matrix material. Polypropylene scrap material was reprocessed into a film by press forming and introduced into a stack of carbon fibre preforms made from recycled carbon fibres recovered via a pyrolysis process from aircraft structures. The preform stack was heated and the composite material was manufactured by press forming. A challenging issue in this work was to achieve the desired distribution of the recovered carbon fibres in the fibre preforms. Here, a paper making method was employed to distribute the recovered carbon fibres randomly in the plane. It is well known that the fibre/PP interface properties are often the weakest link in the composite performance. Several modifications, including the addition of maleic anhydride grafted polypropylene (MAPP), are often used. MAPP improves the interface bonding between the fibre and polymer matrix by two simultaneous reactions. Firstly, the long molecular chain is responsible for chain entanglements and co-crystallisation with the non-polar PP matrix. These entanglements provide mechanical integrity to the host material. Secondly, the anhydride groups chemically interact with the functional groups on the fibre surface. The addition of MAPP has been found to improve the interface and increase the stiffness and strength of the composite. Inelastic mechanical behaviour in tension of a recycled polypropylene (rPP) matrix and a rPP matrix with addition of 10% of maleic anhydride grafted polypropylene (rPP+MAPP) was characterised and compared. The time dependent response was decomposed into nonlinear viscoelastic and viscoplastic parts and each of them quantified. It was found that the elastic properties of the rPP matrix did not degrade during loading. The addition of MAPP to the rPP matrix did not change the mechanical properties of the material. A non-linear material model was developed and the involved parameters (stress dependent functions) were identified. The model was then validated in a stress controlled test at a constant stress rate. The inelastic and time dependent behaviour of the MAPP modified composite material in tension was analysed. A series of quasistatic tensile and creep tests were performed to identify the material model, which accounts for: a) damage related stiffness reduction, b) development of stress and time dependent irreversible strains described as viscoplasticity, c) nonlinear viscoelastic behaviour. Fibre length distribution was investigated before and after composite manufacturing process to investigate the influence of the processing conditions on the fibre degradation. The quality of the manufactured novel, fully recycled, composite material regarding void content and fibre orientation was examined by microscopy.

sted, utgiver, år, opplag, sider
Luleå: Luleå tekniska universitet, 2011.
Serie
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
HSV kategori
Forskningsprogram
Polymera konstruktionsmaterial
Identifikatorer
URN: urn:nbn:se:ltu:diva-18096Lokal ID: 6cd55184-1ccd-42b9-b478-e924fe7549daISBN: 978-91-7439-286-9 (tryckt)OAI: oai:DiVA.org:ltu-18096DiVA, id: diva2:991102
Merknad
Godkänd; 2011; 20110426 (magszp); DISPUTATION Ämnesområde: Polymera konstruktionsmaterial/Polymeric Composite Materials Opponent: Professor Geoff Gibson, School of Mechanical and Systems Engineering, Newcastle University, Newcastle, UK Ordförande: Adj professor Leif Asp, Institutionen för teknikvetenskap och matematik, Luleå tekniska universitet, Luleå. Tid: Torsdag den 8 september 2011, kl 10.00 Plats: E231, Luleå tekniska universitetTilgjengelig fra: 2016-09-29 Laget: 2016-09-29 Sist oppdatert: 2017-11-24bibliografisk kontrollert

Open Access i DiVA

fulltekst(8032 kB)392 nedlastinger
Filinformasjon
Fil FULLTEXT01.pdfFilstørrelse 8032 kBChecksum SHA-512
38abd38b8235628953446093bb98391175ff2b9c2d273f230a41feacfe8b27698746e8da6ea0a5d9b681d8c8715542bfb3e8edba3c4540afb29a5576cac7f7d8
Type fulltextMimetype application/pdf

Personposter BETA

Szpieg, Magdalena

Søk i DiVA

Av forfatter/redaktør
Szpieg, Magdalena
Av organisasjonen

Søk utenfor DiVA

GoogleGoogle Scholar
Totalt: 392 nedlastinger
Antall nedlastinger er summen av alle nedlastinger av alle fulltekster. Det kan for eksempel være tidligere versjoner som er ikke lenger tilgjengelige

isbn
urn-nbn

Altmetric

isbn
urn-nbn
Totalt: 492 treff
RefereraExporteraLink to record
Permanent link

Direct link
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annet format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annet språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf