Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Experimental testing of anchoring devices for bottom rail in partially anchored timber frame shear walls with two-sided sheathing
Luleå tekniska universitet, Institutionen för samhällsbyggnad och naturresurser, Byggkonstruktion och -produktion.
2012 (Engelska)Rapport (Övrigt vetenskapligt)
Abstract [en]

Källsner and Girhammar [1] have presented a new plastic design method for wood-framed shear walls at ultimate limit state. This method allows the designer to calculate the load-carrying capacity of shear walls partially anchored, where the leading stud is not fully anchored against uplift. The anchorage system of shear walls is provided from anchor bolts and hold downs. Anchor bolts provide horizontal shear continuity between the bottom rail and the foundation. Hold downs are directly connected from the vertical end stud to the foundation. When hold downs are not provided, the bottom row of nails transmits the vertical forces in the sheathing to the bottom rail (instead of the vertical stud) where the anchor bolts will further transmit the forces into the foundation. Because of the eccentric load transfer, due to forces acting in the same vertical plane, transverse bending is created in the bottom rail and splitting often occurs. It is important to evaluate this cross-wise bending and to ensure that no brittle failure occur in the bottom rail. The bottom rail is experimentally studied with respect to two primary failure modes, splitting along the bottom of the bottom rail due to cross-wise bending and splitting along the edge side of the bottom rail due forces perpendicular to the grain from the sheathing-to-framing connections. The parameters varied are the size of the washer and the orientation of the pith. The bottom rail was subjected to loading perpendicular to grain through two-sided sheathing. In this report the different set of series are presented. Five sets were conducted depending on the size of the washer and in each set the pith was placed upwards and downwards. The tests showed three different failure modes. In addition to the failure modes that the testing program was aimed at, splitting along the bottom or side of the bottom rail, the final failure was also due to plastic bending and withdrawal of the sheathing-to-framing nails. The results show that the size of the washer has a significant influence on the maximum load and the failure modes. The results show also that the orientation of the pith have a significant influence on the maximum load.

Ort, förlag, år, upplaga, sidor
Luleå: Luleå tekniska universitet, 2012. , s. 143
Serie
Teknisk rapport / Luleå tekniska universitet, ISSN 1402-1536
Nyckelord [en]
timber shear walls, partially anchored, sheathing-to-framing joint, bottom rail, cross-wise bending, splitting of bottom surface, splitting of side surface, Civil engineering and architecture - Building engineering
Nyckelord [sv]
Samhällsbyggnadsteknik och arkitektur - Byggnadsteknik
Nationell ämneskategori
Husbyggnad
Forskningsämne
Träbyggnad
Identifikatorer
URN: urn:nbn:se:ltu:diva-24496Lokalt ID: b37e7fbb-d289-4ca9-8fe7-d8f5a771a740ISBN: 978-91-7439-387-3 (tryckt)OAI: oai:DiVA.org:ltu-24496DiVA, id: diva2:997548
Anmärkning
Godkänd; 2012; 20120116 (giucap)Tillgänglig från: 2016-09-29 Skapad: 2016-09-29 Senast uppdaterad: 2017-11-24Bibliografiskt granskad

Open Access i DiVA

fulltext(15804 kB)34 nedladdningar
Filinformation
Filnamn FULLTEXT01.pdfFilstorlek 15804 kBChecksumma SHA-512
084ac021c9baf463db0bfe809b7d8588985e97996bc313d5789cac5c158248d8364f8f47964ad9d816d819568685ff9f48971e81d4824babc160a2ddca7eb4b4
Typ fulltextMimetyp application/pdf

Personposter BETA

Caprolu, Giuseppe

Sök vidare i DiVA

Av författaren/redaktören
Caprolu, Giuseppe
Av organisationen
Byggkonstruktion och -produktion
Husbyggnad

Sök vidare utanför DiVA

GoogleGoogle Scholar
Totalt: 34 nedladdningar
Antalet nedladdningar är summan av nedladdningar för alla fulltexter. Det kan inkludera t.ex tidigare versioner som nu inte längre är tillgängliga.

isbn
urn-nbn

Altmetricpoäng

isbn
urn-nbn
Totalt: 169 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf