Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Headed Shear Studs versus High-Strength Bolts in Prefabricated Composite Decks
Faculty of Civil Engineering, University of Belgrade.
University of Belgrade, Faculty of Civil Engineering, University of Belgrade.
University of Belgrade, Faculty of Civil Engineering, University of Belgrade.
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Structural and Construction Engineering. Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Structural and Fire Engineering.ORCID iD: 0000-0003-4791-2341
Number of Authors: 42016 (English)In: Composite Construction in Steel and Concrete VII / [ed] Mark Bradford; Brian Uy, New York: American Society of Civil Engineers (ASCE), 2016, p. 687-702Conference paper, Published paper (Refereed)
Abstract [en]

Prefabricated steel and concrete composite decks are an interesting option to improve competitiveness and sustainability of the composite structures. Longitudinal shear connection is usually established by grouped headed studs, but possible alternative solution is to use bolted shear connectors. Welded headed studs and bolts (grade 8.8) are experimentally examined in the push-out tests (four tests on each). The same arrangement and dimensions of shear connectors (16 mm diameter and 100 mm height above flange) are considered and their resistances and behaviour are compared. Experimental results showed that headed studs and bolted shear connectors have similar shear resistance, while headed studs are more ductile. FEA is performed by ABAQUS/Explicit solver with damage material models to get more insight into behaviour of the specimens. FEA shows rather good agreement with experimental results. Influence of the bolt to hole clearance on the behaviour of specimens with bolted shear connectors is analysed and discussed

Place, publisher, year, edition, pages
New York: American Society of Civil Engineers (ASCE), 2016. p. 687-702
National Category
Building Technologies
Research subject
Steel Structures
Identifiers
URN: urn:nbn:se:ltu:diva-28251DOI: 10.1061/9780784479735.052ISI: 000389435700052Local ID: 1fb9d78d-a58f-4587-a254-c5cdd0cffbe1ISBN: 978-0-7844-7973-5 (electronic)OAI: oai:DiVA.org:ltu-28251DiVA, id: diva2:1001446
Conference
International Conference on Composite Construction in Steel and Concrete : 28/07/2013 - 31/07/2013
Note

Godkänd; 2016; 20160303 (andbra)

Available from: 2016-09-30 Created: 2016-09-30 Last updated: 2018-06-08Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full text

Authority records BETA

Pavlovic, MarkoVeljkovic, Milan

Search in DiVA

By author/editor
Pavlovic, MarkoVeljkovic, Milan
By organisation
Structural and Construction EngineeringStructural and Fire Engineering
Building Technologies

Search outside of DiVA

GoogleGoogle Scholar

doi
isbn
urn-nbn

Altmetric score

doi
isbn
urn-nbn
Total: 77 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf