Change search
ReferencesLink to record
Permanent link

Direct link
Laser cladding of cast iron using a 12 kW CO2-laser combined with induction heating
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Product and Production Development.
2005 (English)In: 10th NOLAMP Conference: the 10th Nordic Laser Materials Processing Conference, 17-19 August 2005, Luleå Sweden / [ed] Alexander Kaplan, Luleå: Luleå tekniska universitet, 2005, 217-224 p.Conference paper (Refereed)
Abstract [en]

Laser surfacing experiments were carried out using high alloy high, strength compact graphite iron Darcast (3.5%C, 2%Si, 0.85%Mn, 0.9%Cu) and ductile cast iron SS0732 (3.4-3.85%C, 2.3-3.1%Si, 0.1-0.3%Mn) substrate materials with a view to developing a crack-free surfacing process for use on piston rings. The cladding material used was a nickel based chromium carbide powder. Tracks 20 mm wide and 1-2 mm thick were created using heat input of 1700-3000 J/mm; pre- and post-heating using induction heating equipment was used to prevent cracking. Based on the experiments, parameters suitable for laser surfacing of SS0732 piston rings were selected and applied

Place, publisher, year, edition, pages
Luleå: Luleå tekniska universitet, 2005. 217-224 p.
Research subject
Manufacturing Systems Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-34875Local ID: 93020410-dcf6-11db-9cae-000ea68e967bISBN: 91-631-7228-3OAI: oai:DiVA.org:ltu-34875DiVA: diva2:1008127
Conference
Nordic Laser Materials Processing Conference : 17/08/2005 - 19/08/2005
Note
Godkänd; 2005; 20070328 (cira)Available from: 2016-09-30 Created: 2016-09-30Bibliographically approved

Open Access in DiVA

No full text

Search in DiVA

By author/editor
Wiklund, GregerKaplan, Alexander
By organisation
Product and Production Development

Search outside of DiVA

GoogleGoogle Scholar

Total: 4 hits
ReferencesLink to record
Permanent link

Direct link