Welding of Non-nominal Geometries: Physical Tests
Number of Authors: 8
2016 (English)In: Procedia CIRP, ISSN 2212-8271, E-ISSN 2212-8271, Vol. 43, 136-141 p.Article in journal (Refereed)
The geometrical quality of a welded assembly is to some extent depending part positions before welding. Here, a design of experiment is set up in order to investigate this relation using physical tests in a controlled environment. Based on the experimental results it can be concluded that the influence of part position before welding is significant for geometrical deviation after welding. Furthermore, a working procedure for a completely virtual geometry assurance process for welded assemblies is outlined. In this process, part variations, assembly fixture variations and welding induced variations are important inputs when predicting the capability of the final assembly.
Place, publisher, year, edition, pages
2016. Vol. 43, 136-141 p.
Other Materials Engineering
Research subject Material Mechanics
IdentifiersURN: urn:nbn:se:ltu:diva-35322DOI: 10.1016/j.procir.2016.02.046ISI: 000387661800023Local ID: 9cebfbe1-1a69-46a7-96ff-f4f7f58c5cbdOAI: oai:DiVA.org:ltu-35322DiVA: diva2:1008575
CIRP Conference on Computer Aided Tolerancing : 18/05/2016 - 20/05/2016
Validerad; 2016; Nivå 1; 20160510 (andbra)
; Konferensartikel i tidskrift2016-09-302016-09-302016-12-19Bibliographically approved