Harmonic emission before and after changing to LED and CFL: Part I: Laboratory measurements for a domestic customer
2010 (English)In: 14th International Conference on Harmonics and Quality of Power (ICHQP), Piscataway, NJ: IEEE Communications Society, 2010Conference paper (Refereed)
This paper presents an investigation after the impact on a number of power-quality parameters due to the change from incandescent lamps to energy saving lamps like CFL and LED. The measurements were conducted in a full-scale laboratory model with ordinary household equipment connected, thus simulating an ordinary domestic customer. Incandescent lamps have been replaced in stages by CFL and LED lamps. The CFL's and LED lamps will contribute to an increase in current distortion but the amplitude of the harmonics is quite low so the change of lighting will only have a minor effect on the total current harmonic distortion. It is also shown that the (total) power factor is not a good indicator to compare the impact of different loads on the system.
Place, publisher, year, edition, pages
Piscataway, NJ: IEEE Communications Society, 2010.
Research subject Electric Power Engineering; Energy Engineering
IdentifiersURN: urn:nbn:se:ltu:diva-35412DOI: 10.1109/ICHQP.2010.5625411ScopusID: 78650572536Local ID: 9f2d0de0-db79-11df-8b36-000ea68e967bISBN: 978-1-4244-7244-4 (print)ISBN: 978-1-4244-7245-1 (electronic)OAI: oai:DiVA.org:ltu-35412DiVA: diva2:1008665
International Conference on Harmonics and Quality of Power : 26/09/2010 - 29/09/2010
Godkänd; 2010; 20101019 (matbol)2016-09-302016-09-302017-03-01Bibliographically approved