Change search
ReferencesLink to record
Permanent link

Direct link
High strain rate tensile testing using microscopic high speed photography
Luleå tekniska universitet.
Luleå tekniska universitet.
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Mechanics of Solid Materials.
1998 (English)In: Experimental mechanics : advances in design, testing and analysis / [ed] I.M. Allison, Taylor and Francis Group , 1998, 175-179 p.Conference paper (Refereed)
Abstract [en]

A method is presented that combines advanced experimental and numerical techniques in the determination of constitutive parameters. The general principle is that a specimen, producing a non-homogeneous stress state, is deformed rapidly. Load and deformation is recorded during the deformation and the event is also simulated using FEM. For the numerical calculation a set of constitutive parameters is used which can be systematically adapted so that a good agreement with experimental results is achieved. Strain rates of 10 exp 4 - 10 exp 5 s exp -1 are possible because the specimen can be made small. Microscopic high-speed photography is used to record the deformation of specimens of sub millimetre size. The method allows both tensile and compressive testing.

Place, publisher, year, edition, pages
Taylor and Francis Group , 1998. 175-179 p.
Research subject
Solid Mechanics
Identifiers
URN: urn:nbn:se:ltu:diva-35684Local ID: a5467470-fa2a-11db-b2dd-000ea68e967bOAI: oai:DiVA.org:ltu-35684DiVA: diva2:1008937
Conference
Experimental Mechanics (International conference) : 24/08/1998 - 28/08/1998
Note
Godkänd; 1998; 20070504 (cira)Available from: 2016-09-30 Created: 2016-09-30Bibliographically approved

Open Access in DiVA

No full text

Search in DiVA

By author/editor
Sundin, Karl-Gustaf
By organisation
Mechanics of Solid Materials

Search outside of DiVA

GoogleGoogle Scholar

Total: 7 hits
ReferencesLink to record
Permanent link

Direct link