Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Environmentally friendly process for high density fibreboards
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Wood Science and Engineering.
Metso, Sundsvall.
Mittuniversitetet.
2006 (English)Conference paper, Oral presentation only (Other academic)
Abstract [en]

Urea-formaldehyde (UF) resin is a common binder in many fibre- and particleboards today. However, formaldehyde is a fairly reactive compound with many negative affects on health and environment. This paper describes a process to make thin high density fibreboards without use of conventional resin such as UF. Initially we found that wood particles such as ones used in particle board had, when activated with hydrogen peroxide and iron catalyst, self-bonding capability when hot-pressed into boards. Low swelling board, although at somewhat higher density than conventional glued ones, could be formed by pressing activated wood particles at 170 oC in a laboratory press. We found that the activation technique was applicable to dry or semi-dry board processes and was considered to be well suited for fibreboards from refined wood fibers especially as their specific (contact) area is high. Activated wood fibres were produced at Metso Panelboards Pilot-refiner in Sundsvall and mats were also formed and pressed into boards 50x60 cm2 at fairly conventional pressing conditions. At a hydrogen peroxide charge of 4% boards made from birch fibres with good mechanical properties (in terms of bending strength and internal bonding) were produced. Thickness swelling in water was low (TS24h., 15-20%). At lower hydrogen peroxide charges (<2%) the swelling was higher. Development of the process to also include other wood species than birch is in our interest. Furthermore, properties of the boards were strongly dependent on the moisture content of fibres; at low moisture content (MC<8%) thickness swelling increased. We see a high potential in the process as the glue-free technique is estimated to reduce production cost of boards as well as give environmental advantages.

Place, publisher, year, edition, pages
2006.
National Category
Bio Materials
Research subject
Wood Physics
Identifiers
URN: urn:nbn:se:ltu:diva-36917Local ID: abd5ccf0-f7d2-11db-ac79-000ea68e967bOAI: oai:DiVA.org:ltu-36917DiVA: diva2:1010416
Conference
Nordic-Baltic Network in Wood Material Science and Engineering : 30/10/2006 - 31/10/2006
Note
Godkänd; 2006; Bibliografisk uppgift: Sider: 9; 20070501 (ysko)Available from: 2016-10-03 Created: 2016-10-03Bibliographically approved

Open Access in DiVA

fulltext(211 kB)13 downloads
File information
File name FULLTEXT01.pdfFile size 211 kBChecksum SHA-512
f969d94a3c8f64cbbdf96773c83c3133e4a785cd75bbcf72b80c1412bed6a789425a4d33ab8f08ac6f592a7173357f4d50f04bce24b797bfb868d617fbe5a78d
Type fulltextMimetype application/pdf

Other links

http://www.wse.no/

Search in DiVA

By author/editor
Karlsson, OlovWestermark, Ulla
By organisation
Wood Science and Engineering
Bio Materials

Search outside of DiVA

GoogleGoogle Scholar
Total: 13 downloads
The number of downloads is the sum of all downloads of full texts. It may include eg previous versions that are now no longer available

Total: 45 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf