Change search
ReferencesLink to record
Permanent link

Direct link
Experiments with one-sided spray-cooling of steel plates for evaluation of thermo-mechanical material models
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Mechanics of Solid Materials.
Plannja HardTech AB.
Plannja HardTech AB.
1996 (English)In: Quenching and the control of distortion: proceedings of the 2nd International Conference on Quenching and the Control of Distortion, 4 - 7 November 1996, Cleveland Marriott Society Center, Cleveland, Ohio / [ed] George E. Totten, Materials Park, Ohio: ASM International, 1996, 267-273 p.Conference paper (Refereed)
Abstract [en]

The quenching process of thin plates is studied. In many industrial applications of quenching, there is a need for simple tests for evaluation of analysis methods and material models for simulations. The presented study is part of a program for the simulation of the combined pressing and quenching process of thin-walled structures. This type of manufacturing process is used in, e.g., the production of side-impact protection beams for cars. By the use of an experiment with one-sided spray-cooling of a thin strip, large deformations can be studied and followed in time. The prediction of the deformation of the strip can be regarded as a one-dimensional problem where the curvature of the strip is sought. The thermo-mechanical behavior of the material can be evaluated throughout the time-history of the tests. In order to match the deformation of the plate, the material model must predict the temperature distribution through the thickness of the plate in each point in time, the phase transformations taking place in each layer of the thin plate and the stress and strain components in each layer. Experiments have been performed with a material (Inconel 600) without phase transformations in the actual temperature and time scale and with a material with only martensitic transformations. Analyses with a thermo-elastic-plastic material model with transformation plasticity included have been performed

Place, publisher, year, edition, pages
Materials Park, Ohio: ASM International, 1996. 267-273 p.
Research subject
Computer Aided Design; Solid Mechanics
URN: urn:nbn:se:ltu:diva-37017Local ID: ae41c1a0-faf8-11db-b816-000ea68e967bISBN: 0-87170-584-2 (print)OAI: diva2:1010515
International Conference on Quenching and Control of Distortion : 04/11/1996 - 07/11/1996
Godkänd; 1996; 20070505 (cira)Available from: 2016-10-03 Created: 2016-10-03Bibliographically approved

Open Access in DiVA

No full text

Search in DiVA

By author/editor
Oldenburg, MatsJonsson, Mikael
By organisation
Mechanics of Solid Materials

Search outside of DiVA

GoogleGoogle Scholar

Total: 6 hits
ReferencesLink to record
Permanent link

Direct link