Change search
ReferencesLink to record
Permanent link

Direct link
Jet flow in a direct strip casting feeding system
Luleå tekniska universitet.
1995 (English)In: Near-Net-Shape Casting in the Minimills: Proceedings of International Symposium / [ed] J K Brimacombe; Indira Vasanti Samarasekera, Montreal: MetSoc , 1995, 405-413 p.Conference paper (Refereed)
Abstract [en]

This paper presents methods for making thin metal sheets in a single belt caster for continuous casting. Surface tension effects are found to highly influence the region where the liquid metal enters the conveyor belt. Tests with tin casting in a laboratory scale caster have been made. It has been found that an increase in liquid flow speed toegher with solidification of the liquid makes it possible to obtain a sheet thickness less than the natural film thickness of liquid tin. By use of inclined side dams to confine the flow on the belt it is possible to establish a thin liquid sheet with a horizontal surface even close to the side dams. Contact between the liquid metal and the side dams is established and maintained if the liquid has sufficient momentum perpendicular to the casting direction

Place, publisher, year, edition, pages
Montreal: MetSoc , 1995. 405-413 p.
Research subject
Fluid Mechanics
Identifiers
URN: urn:nbn:se:ltu:diva-38168Local ID: c7ae8fb0-a495-11db-8975-000ea68e967bISBN: 0-919086-63-2OAI: oai:DiVA.org:ltu-38168DiVA: diva2:1011667
Conference
International Symposium on Near-Net-Shape Casting in the Minimills : 01/08/1995 - 02/08/1995
Note
Godkänd; 1995; 20070115 (ysko)Available from: 2016-10-03 Created: 2016-10-03Bibliographically approved

Open Access in DiVA

No full text

Search outside of DiVA

GoogleGoogle Scholar

Total: 7 hits
ReferencesLink to record
Permanent link

Direct link