Change search
ReferencesLink to record
Permanent link

Direct link
Nano-sized by-products from metal 3D printing, composite manufacturing and fabric production
KTH XPRES – Initiative for Excellence in Production Research.
KTH XPRES – Initiative for Excellence in Production Research.
KTH XPRES – Initiative for Excellence in Production Research.
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Material Science.
Show others and affiliations
Number of Authors: 7
2016 (English)In: Journal of Cleaner Production, ISSN 0959-6526, E-ISSN 1879-1786, Vol. 139, 1224-1233 p.Article in journal (Refereed) Published
Abstract [en]

Recently, the health and environmental perspective of nano-materials has gained attention. Most previous work focused on Engineered Nanoparticles (ENP). This paper examines some recently introduced production routes in terms of generated nano-sized by-products. A discussion on the hazards of emitting such particles and fibers is included.

Fine by-products were found in recycled metal powder after 3D printing by Selective Laser Melting (SLM). The process somehow generated small round metal particles (∼1–2 μm) that are possibly carcinogenic and respirable, but not small enough to enter by skin-absorption. With preventive measures like closed handling and masks, any health related effects can be prevented.

The composite manufacturing in particular generated ceramic and carbonaceous particles that are very small and respirable but do not appear to be intrinsically toxic. The smallest features in agglomerates were about 30 nm. Small particles and fibers that were not attached in agglomerates were found in a wide range of sizes, from 1 μm and upwards. Preventive measures like closed handling and masks are strongly recommended.

In contrast, the more traditional production route of fabric production is investigated. Here, brushing residue and recycled wool from fabric production contained few nano-sized by-products.

Place, publisher, year, edition, pages
2016. Vol. 139, 1224-1233 p.
National Category
Composite Science and Engineering
Research subject
Polymeric Composite Materials
Identifiers
URN: urn:nbn:se:ltu:diva-59674DOI: 10.1016/j.jclepro.2016.08.141ISI: 000386991600112ScopusID: 2-s2.0-84995543561OAI: oai:DiVA.org:ltu-59674DiVA: diva2:1034463
Note

Validerad; 2016; Nivå 2; 2016-10-12 (andbra)

Available from: 2016-10-12 Created: 2016-10-12 Last updated: 2016-12-02Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Fernberg, Patrik
By organisation
Material Science
In the same journal
Journal of Cleaner Production
Composite Science and Engineering

Search outside of DiVA

GoogleGoogle Scholar

Altmetric score

Total: 23 hits
ReferencesLink to record
Permanent link

Direct link