Change search
ReferencesLink to record
Permanent link

Direct link
Optimization of aluminum/silicon compounds on fire resistance of old corrugated container fiber foam material
Department of Material Science and Engineering, Fujian Agriculture and Forestry University, Fuzhou.
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Wood Science and Engineering. tingjie.chen@ltu.se .
Department of Material Science and Engineering, Fujian Agriculture and Forestry University, Fuzhou.
Department of Material Science and Engineering, Fujian Agriculture and Forestry University, Fuzhou.
Show others and affiliations
Number of Authors: 7
2016 (English)In: BioResources, ISSN 1930-2126, E-ISSN 1930-2126, Vol. 11, no 3, 6505-6517 p.Article in journal (Refereed) Published
Abstract [en]

Old corrugated container fiber foam material (OCCM) was prepared using a liquid frothing approach. The effect of the content of Al/Si compounds, the molar ratio of Al3+/SiO2, and different addition form on the limited oxygen index (LOI) and residue percentage of OCCM was optimized using an orthogonal design. The fire resistance of OCCM was best when the content of Al/Si compounds was 900 mL, the molar ratio of Al3+/SiO2 was 1:1, and the aluminum sulfate solution was added first, followed by the separately added sodium silicate solution. Under these conditions, the LOI and residue percentage of OCCM reached 32.3 and 53.51%, respectively. Thermogravimetric analysis indicated that Al/Si compounds promoted char formation and reduced the heat release of the optimized OCCMs during depolymerisation. Compared with the control group, the residue percentage of optimized OCCM was increased from 12.49% to 37.98%. Fourier transform infrared spectroscopy identified the functional groups of Al/Si compounds in the optimized OCCMs, confirming that pyrolysis of the optimized OCCMs was affected by Al/Si compounds.

Place, publisher, year, edition, pages
2016. Vol. 11, no 3, 6505-6517 p.
National Category
Other Mechanical Engineering
Research subject
Wood Science and Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-60011DOI: 10.15376/biores.11.3.6505-6517ScopusID: 2-s2.0-84988664715OAI: oai:DiVA.org:ltu-60011DiVA: diva2:1040665
Note

Validerad; 2016; Nivå 2; 2016-10-28 (andbra)

Available from: 2016-10-28 Created: 2016-10-28 Last updated: 2016-10-28Bibliographically approved

Open Access in DiVA

No full text

Other links

Publisher's full textScopus

Search in DiVA

By author/editor
Chen, Tingjie
By organisation
Wood Science and Engineering
In the same journal
BioResources
Other Mechanical Engineering

Search outside of DiVA

GoogleGoogle Scholar

Altmetric score

Total: 3 hits
ReferencesLink to record
Permanent link

Direct link