Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Influence of Surface Reinforcement, Member thickness and Cracked Concrete on Tensile Capacity of Anchor Bolts
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Structural and Fire Engineering.ORCID iD: 0000-0001-9937-6072
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Structural and Fire Engineering.
Luleå University of Technology, Department of Civil, Environmental and Natural Resources Engineering, Structural and Fire Engineering.ORCID iD: 0000-0002-0560-9355
University of Stuttgart .
Show others and affiliations
2017 (English)In: ACI Structural Journal, ISSN 0889-3241, E-ISSN 1944-7361, Vol. 114, no 6Article in journal (Refereed) In press
Abstract [en]

An extensive numerical study was carried out to evaluate the influence of concrete member thickness and orthogonal surface reinforcement on the tensile capacity and performance of anchor bolts in uncracked concrete members. Anchor bolts at various embedment depths (hef=50 to 300 mm (1.97 to 11.81 in.)) in unreinforced and reinforced concrete members of various thicknesses (H=1.5 – 5.0∙hef) were simulated. The reinforced concrete slabs were considered to be lightly-reinforced and over-reinforced to evaluate also the influence of amount of reinforcement. Furthermore, the behavior of anchor bolts at various embedment depths in pre-cracked reinforced concrete members was numerically investigated. The numerical results were compared with predictions from current design models including the Concrete Capacity (CC) method.

The numerical results show that in uncracked concrete the tensile capacity of anchor bolts increases up to 20% and the anchorage behavior becomes more ductile with increasing member thickness or by having surface reinforcement. The numerical results also show that the CC method underestimates the tensile capacity of deep anchors (hef≥200 mm (7.87 in.)), while it slightly overestimates the capacity of short anchors (hef≤100 mm (3.94 in.)) in thin unreinforced members. It was also found that the over-reinforced concrete does not improve the anchorage capacity and performance any further than the lightly-reinforced concrete. Based on the numerical results, several recommendations are proposed to account for the influence of member thickness, surface reinforcement and cracked concrete. Further experimental studies are ongoing to verify and generalize the recommendations of this study.

Place, publisher, year, edition, pages
American Concrete Institute, 2017. Vol. 114, no 6
Keyword [en]
headed anchor; cone breakout failure; splitting failure; tension loading; surface reinforcement; member thickness, cracked concrete.
National Category
Civil Engineering Infrastructure Engineering
Research subject
Structural Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-66331OAI: oai:DiVA.org:ltu-66331DiVA: diva2:1153766
Available from: 2017-10-31 Created: 2017-10-31 Last updated: 2017-11-24
In thesis
1. Anchorage in Concrete Structures: Numerical and Experimental Evaluations of Load-Carrying Capacity of Cast-in-Place Headed Anchors and Post-Installed Adhesive Anchors
Open this publication in new window or tab >>Anchorage in Concrete Structures: Numerical and Experimental Evaluations of Load-Carrying Capacity of Cast-in-Place Headed Anchors and Post-Installed Adhesive Anchors
2017 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

Various anchorage systems including both cast-in-place and post-installed anchors have been developed for fastening both non-structural and structural components to concrete structures. The need for increased flexibility in the design of new structures and strengthening of existing concrete structures has led to increased use of various metallic anchors in practice. Although millions of fasteners are used each year in the construction industry around the world, knowledge of the fastening technology remains poor. In a sustainable society, buildings and structures must, from time to time, be adjusted to meet new demands. Loads on structures must, in general, be increased to comply with new demands, and the structural components and the structural connections must also be upgraded. From the structural connection point of view, the adequacy of the current fastenings for the intended increased load must be determined, and inadequate fastenings must either be replaced or upgraded. The current design models are generally believed to be conservative, although the extent of this behavior is not very clear. To address these issues, the current models must be refined to allow the design of new fastenings and also the assessment of current anchorage systems in practice.

The research presented in this thesis consists of numerical and experimental studies of the load-carrying capacity of anchors in concrete structures. Two different types of anchors were studied: (I) cast-in-place headed anchors, and (II) post-installed adhesive anchors. This research focused particularly on the tensile load-carrying capacity of cast-in-place headed anchors and also on the sustained tension loading performance of post-installed adhesive anchors. The overall objective of this research was to provide knowledge for the development of improved methods of designing new fastening systems and assessing the current anchorage systems in practice.

For the cast-in-place headed anchors (I), the influence of various parameters including the size of anchor head, thickness of concrete member, amount of orthogonal surface reinforcement, presence of concrete cracks, concrete compressive strength, and addition of steel fibers to concrete were studied. Among these parameters, the influence of the anchor head size, member thickness, surface reinforcement, and cracked concrete was initially evaluated via numerical analysis of headed anchors at various embedment depths. Although these parameters have considerable influence on the anchorage capacity and performance, this influence is not explicitly considered by the current design models. The numerical results showed that the tensile breakout capacity of headed anchors increases with increasing member thickness and/or increasing size of the anchor head or the use of orthogonal surface reinforcement. However, their capacity decreased considerably in cracked concrete. Based on the numerical results, the current theoretical model for the tensile breakout capacity of headed anchors was extended by incorporating several modification factors that take the influence of the investigated parameters into account. In addition, a supplementary experimental study was performed to verify the numerically obtained findings and the proposed refined model. The experimental results corresponded closely to the numerical results, both in terms of failure load and failure pattern, thereby confirming the validity of the proposed model. The validity of the model was further confirmed through experimental results reported in the literature.

Additional experiments were performed to determine the influence of the concrete compressive strength and the addition of steel fiber to concrete on the anchorage capacity and performance. These experiments showed that the anchorage capacity and stiffness increase considerably with increasing concrete compressive strength, but the ductility of the anchor decreases. However, the anchorage capacity and ductility increased significantly with the addition of steel fibers to the concrete mixture. The test results also revealed that the tensile breakout capacity of headed anchors in steel fiber-reinforced concrete is significantly underestimated by the current design model.

The long-term performance and creep behavior of the post-installed headed anchors (II) was evaluated from the results of long-time tests on adhesive anchors under sustained loads. In this experimental study, adhesive anchors of various sizes were subjected to various sustained load levels for up to 28 years. The anchors were also exposed to several in-service conditions including indoor temperature, variations in the outdoor temperature and humidity, wetness (i.e., water on the surface of concrete), and the presence of salt (setting accelerant) additives in the concrete. Among the tested in-service conditions, variations in the outdoor temperature and humidity had the most adverse effect on the long-term sustained loading performance of the anchors. Based on the test results, recommendations were proposed for maximum sustained load levels under various conditions. The anchors tested under indoor conditions could carry sustained loads of up to 47% of their mean ultimate short-term capacities. However, compared with these anchors, the anchors tested under outdoor conditions exhibited larger creep deformation and failure occurred at sustained loads higher than 23% of their mean ultimate short-term capacities. Salt additives in concrete and wet conditions had negligible influence on the long-term performance of the anchors, although the wet condition resulted in progressive corrosion of the steel. Based on the experimental results, the suitability of the current testing and approval provisions for qualifying adhesive anchors subjected to long-term sustained tensile loads was evaluated. The evaluations revealed that the current approval provisions are not necessarily reliable for qualifying adhesive anchors for long-term sustained loading applications. Recommendations were given for modifying the current provisions to ensure safe long-term performance of adhesive anchors under sustained loads.

Place, publisher, year, edition, pages
Luleå- Sweden: Luleå University of Technology, 2017. 352 p.
Series
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
Keyword
Headed anchor; Anchor bolt; Adhesive anchor; Concrete cone breakout; Concrete splitting; Pullout loading; Size effect; Member thickness; Anchor head size; Orthogonal surface reinforcement; Concrete Strength; High-strength concrete; Cracked concrete; Steel fiber-reinforced concrete; Sustained loading; Creep behavior.
National Category
Civil Engineering
Research subject
Structural Engineering
Identifiers
urn:nbn:se:ltu:diva-66333 (URN)978-91-7790-002-3 (ISBN)978-91-7790-003-0 (ISBN)
Public defence
2017-11-30, F1031, Luleå University of Technology, Luleå, 09:00 (English)
Opponent
Supervisors
Available from: 2017-11-06 Created: 2017-10-31 Last updated: 2017-11-24Bibliographically approved

Open Access in DiVA

No full text

Search in DiVA

By author/editor
Nilforoush, RasoulNilsson, MartinElfgren, Lennart
By organisation
Structural and Fire Engineering
In the same journal
ACI Structural Journal
Civil EngineeringInfrastructure Engineering

Search outside of DiVA

GoogleGoogle Scholar

urn-nbn

Altmetric score

urn-nbn
Total: 29 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • harvard1
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf