Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
High-speed imaging of droplet behaviour during the CYCLAM drop-deposition technique
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Product and Production Development.ORCID iD: 0000-0002-9010-1555
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Product and Production Development. University of Mosul, College of Engineering, Department of Mechanical Engineering, Mosul, Iraq.ORCID iD: 0000-0002-4569-8970
2019 (English)In: Procedia Manufacturing, E-ISSN 2351-9789, Vol. 36, p. 208-215Article in journal (Refereed) Published
Abstract [en]

The material in laser additive manufacturing is traditionally supplied in the form of powder or sometimes wire. A technique called CYCLAM was recently presented which is a fast and direct recycling technique which lowers the number of steps that need to be taken in typical recycling, allowing for a more circular economy. The CYCLAM technique proposes that waste metal is directly recycled through laser cutting or laser ablation of one sheet and the molten droplet is directly deposited onto a new product and can be used for additive manufacturing or cladding. The technique also can also use materials that otherwise are not available as powder or wires. Because of the novelty of the technique, it is still scarcely studied, and many aspects still needs to be understood. This paper focusses on high-speed imaging of the technique to understand the droplet behaviour. The material removal of the feeding sheet was done with Remote Fusion Cutting. Different power levels lead to different drop geometry and flight pattern of the drops where the drops at higher power are pushed further forward. The influence of the laser power on the shape of the deposited track can be seen from cross sections of the cladded track where higher power means that more power is transmitted through the feeding sheet and onto the substrate which creates a smoother surface

Place, publisher, year, edition, pages
Elsevier, 2019. Vol. 36, p. 208-215
Keywords [en]
laser additive manufacturing, circular economy, high-speed imaging, laser cladding, recycling
National Category
Manufacturing, Surface and Joining Technology
Research subject
Manufacturing Systems Engineering
Identifiers
URN: urn:nbn:se:ltu:diva-75729DOI: 10.1016/j.promfg.2019.08.027ISI: 000610364700026Scopus ID: 2-s2.0-85072522395OAI: oai:DiVA.org:ltu-75729DiVA, id: diva2:1346697
Conference
17th Nordic Laser Materials Processing Conference (NOLAMP17), 27-29 August, 2019, Trondheim, Norway
Note

Konferensartikel i tidskrift

Available from: 2019-08-28 Created: 2019-08-28 Last updated: 2021-12-13Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus

Authority records

Sundqvist, JesperSamarjy, Ramiz Saeed Matti

Search in DiVA

By author/editor
Sundqvist, JesperSamarjy, Ramiz Saeed Matti
By organisation
Product and Production Development
In the same journal
Procedia Manufacturing
Manufacturing, Surface and Joining Technology

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 111 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf