Mechanical properties of snow related to snowmobiles or similar lightweight tracked vehicles aren't widely researched today and it is difficult to find data. One challenge is that snow properties constantly are changing due to aging, climate conditions and location. Also the measuring procedure is difficult since aged snow often contains layers with various densities and hardness. Soil is to some extent similar to snow, in the context that both are granular materials. The bevameter is a popular device for measuring soil properties, however this device needs to be scaled in order to meet criteria of target for research, i.e. in this case snowmobiles. In this paper a new type of portable bevameter is presented, which is designed and built for measuring snow properties in the field. Results from initial tests are also presented. The aim with the bevameter is to measure snow properties which can be used to simulate the interaction between a snowmobile and soft snow. The designed bevameter can be towed with one snowmobile to the field to execute measurements. One full set of test results is introduced and parameters for simulations are extracted from the result data. The parameters from the data were usable but the quality of the measurements can be improved. One problem with the data collected was noise, which was caused by the interaction between the mechanical parts and the low mass of the bevameter. Furthermore, the usability can be improved by reducing cables which can be hard and fragile during cold weather and by replacing the laser distance-sensor with a string wire potentiometer which isn't sensitive to snow dropping in the measurement area. With some improvements the constructed bevameter is a very useful tool which can be used for field measurements to determine snow properties for snowmobile-size vehicle simulations.