Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Characterisation of the Contact between Cross-Country Skis and Snow: A Macro-Scale Investigation of the Apparent Contact
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Machine Elements.ORCID iD: 0000-0002-4085-8306
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Machine Elements.ORCID iD: 0009-0005-4747-5753
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Machine Elements.ORCID iD: 0000-0003-0414-029X
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Machine Elements.ORCID iD: 0000-0001-9110-2819
Show others and affiliations
2022 (English)In: Lubricants, E-ISSN 2075-4442, Vol. 10, no 11, article id 279Article in journal (Refereed) Published
Abstract [en]

In a cross-country skiing competition, the time difference between the winner and the skier coming in at second place is typically very small. Since the skier spends much of the energy on overcoming resistive forces, a relatively small reduction in these forces can have a significant impact on the results. The resistive forces come partly from the friction, at the tribological interface between the ski and the snow, and as with many tribological processes, the characterisation of its origin plays an important role in determining the frictional properties. Furthermore, in cross-country ski friction, there are several scales impacting the frictional performance, with the major contributors being the ski-camber profile and ski-base structure. Macro-scale measurements of the ski-camber profile under loading are often used to determine how adequate the ski is for use under specific conditions. The characteristic properties usually assessed are the force required to collapse the ski in order to obtain a certain camber height, the topography of the kick-wax zone, and the length (determined by simple means) of the frictional interfaces associated with the rear- and front glide zones, i.e., the apparent contact length. These measurements are, however, commonly performed by loading the ski against a much stiffer counter surface than snow and this affects the quantification of the characteristic properties. To date, some mathematical models have been proposed, but there is no reliable approach for determining the macro-scale properties of the contact between a cross-country ski and a counter surface using simulations. In the present paper, an Artificial Neural Network (ANN) has been trained to predict the ski-camber profile for various loads applied at different positions. A well-established deterministic approach has been employed to simulate the contact between the ANN-predicted ski-camber profile and a linearly elastic body with a flat upper surface, representing the snow. Our findings indicate that this method is feasible for the determination of relevant macro-scale contact characteristics of different skis with snow. Moreover, we show that the apparent contact area does not linearly depend on the load and that the material properties of the counter surface also exert a large impact when quantifying the apparent contact area and the average apparent contact pressure.

Place, publisher, year, edition, pages
MDPI, 2022. Vol. 10, no 11, article id 279
Keywords [en]
contact mechanics, cross-country skiing, cross-country ski, load conditions, ski-camber profile, sports equipment
National Category
Tribology (Interacting Surfaces including Friction, Lubrication and Wear) Applied Mechanics
Research subject
Machine Elements; Physiotherapy; Centre - Swedish Sports Technology and Performance Research Centre (SPORTC)
Identifiers
URN: urn:nbn:se:ltu:diva-94277DOI: 10.3390/lubricants10110279ISI: 000881298300001Scopus ID: 2-s2.0-85141792147OAI: oai:DiVA.org:ltu-94277DiVA, id: diva2:1713568
Funder
Swedish Research Council, 2019-04293
Note

Validerad;2022;Nivå 2;2022-11-25 (hanlid);

Funder: SOK (The Swedish Olympic Committee)

Available from: 2022-11-25 Created: 2022-11-25 Last updated: 2024-03-01Bibliographically approved
In thesis
1. On the Multi-Scale Nature of Ski-Snow Friction: Field Testing, Characterisation and Modelling of Cross-Country Ski Performance
Open this publication in new window or tab >>On the Multi-Scale Nature of Ski-Snow Friction: Field Testing, Characterisation and Modelling of Cross-Country Ski Performance
2024 (English)Doctoral thesis, comprehensive summary (Other academic)
Abstract [en]

The goal of most endurance sports is to get from point A to B in the shortest time possible. Throughout the course, athletes need to overcome the resistive forces that are present in their specific sport. Cross-country skiing is no exception to this, and there are mainly three resistive forces acting on a skier, the aerodynamic drag force, the friction force, and the gravitational force in the inclined parts of a track. The present work focuses on the resistive force of friction between the ski and the snow. At the highest level of ski sports, a large effort is made to reduce the ski-snow friction, and a small reduction in friction can have a large impact on the race outcome. Several aspects are considered when skis are chosen and prepared to minimise friction, ski-camber profile, ski-base material, ski-base texture, and ski-base preparation.  Depending on the prevailing snow and weather conditions, different friction mechanisms are thought to be dominant, so the choices of skis and preparations must be carefully considered and tested accordingly. The present work focuses on the multi-scale nature of ski-snow friction from a contact mechanical point of view. Where the ski-camber profile is separated into the macro- and meso-scale, and the larger deformations i.e. the macro scale are incorporated, thou ski-camber profile measurements. The smaller deformations in the snow due to the contact pressure are considered as the meso scale, where the contact mechanical response is evaluated and characterised in terms of apparent contact area and pressure. The ski-base texture is categorised as the micro-scale; on this scale, the elastic modulus is modelled as ice which is several times stiffer than the meso-scale snow. The contact mechanical response is characterised in terms of the parameters, real contact area, average interfacial separation, and average reciprocal interfacial separation. The multi-scale nature of the ski-snow contact is coupled through the apparent pressure, which acts as a load condition for the micro-scale contact simulation and considering both scales, the micro-scale parameters can be evaluated along the entire ski. To correlate the characteristics obtained from the multi-scale simulation to ski-snow friction, a full-scale ski-snow tribometer was developed. The tribometer was built to mimic an athlete on skis while performing the G7, in terms of load magnitude, positioning and transfer interface. To do so an athlete’s plantar pressure distribution was measured and analysed in different variations of the G7 position. The neutral position, resembling a load position of 55% of the athlete’s foot measured for the toe, was chosen for the tribometer. A replica of a ski boot was developed for the tribometer, herein called the measurement boot, to make it possible to use skis equipped with a regular NNN-binding system on the ski tribometer. The impact on the ski-camber profile from using the measurement boot was also studied, results showed that since a ski boot transfers the load on a larger area, the ski will collapse more, compared to the conventionally used block that is designed to fit the binding system. The tribometer from here on called the sled can be equipped with a pair of skis, where the width of the ski fits a classic ski track. The sled was designed to be loaded with regular Olympic weights to enable a large variety of different loads. During field measurements, the sled is accelerated using a downhill slope, and the velocity and position are measured using an RTK-GNSS system. The retrieved data in terms of time, altitude, and velocity, was used to calculate a mean coefficient of friction for reaching individual runs while accommodating for aerodynamic drag, centripetal force, and slope angle. During the winter period of January-February 2024, a measurement campaign was carried out to evaluate the influence of the simulated apparent and real contact area in cold conditions and hard tracks. Eight skis with different apparent contact areas were equipped with 3 different ski-base textures i.e. developing different amounts of real contact area.  Results from the friction tests indicate that there exists a different optimum combination of apparent and real contact area at the snow temperatures of -3.5, -8 and -13.5 degrees. At the warmer -3.5 degrees, a small apparent and real contact area exhibited the lowest friction, and at -13.5 degrees the opposite trend where a large apparent and contact area exhibited the lowest friction. For each condition, an empirical model was developed based on the variables apparent and real contact area.Using the developed ski-snow contact models, a pair of skis and its ski-base texture can be characterised and the frictional performance in cold conditions with hard track can be estimated using the empirical model. Employing this method makes ski and ski-base texture selection possible before testing, thus contributing to a more efficient way of conducting ski selection.

Place, publisher, year, edition, pages
Luleå: Luleå University of Technology, 2024
Series
Doctoral thesis / Luleå University of Technology 1 jan 1997 → …, ISSN 1402-1544
Keywords
Cross-Country Skiing, Winter Sports, Winter Olympics, Multi-Scale, Sports Equipment, Contact Mechanics, Ski-Camber Profile, Ski-Base Texture, Ski, Snow, Friction, RTK-GNSS
National Category
Tribology (Interacting Surfaces including Friction, Lubrication and Wear)
Research subject
Machine Elements; Centre - Centre for Sports and Performance Technology (SPORTC)
Identifiers
urn:nbn:se:ltu:diva-104443 (URN)978-91-8048-493-0 (ISBN)978-91-8048-494-7 (ISBN)
Public defence
2024-04-26, E632, Luleå University of Technology, Luleå, 09:00 (English)
Opponent
Supervisors
Available from: 2024-03-01 Created: 2024-03-01 Last updated: 2024-04-22Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus

Authority records

Kalliorinne, KalleSandberg, JoakimHindér, GustavLarsson, RolandHolmberg, Hans-ChristerAlmqvist, Andreas

Search in DiVA

By author/editor
Kalliorinne, KalleSandberg, JoakimHindér, GustavLarsson, RolandHolmberg, Hans-ChristerAlmqvist, Andreas
By organisation
Machine ElementsHealth, Medicine and Rehabilitation
Tribology (Interacting Surfaces including Friction, Lubrication and Wear)Applied Mechanics

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 233 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf