Drying rates and power densities are determined for pine-and sprucewood when dried from green to 8% moisture content by microwave power. The process is controlled by measurements of internal wood temperature, internal vapour pressure and rate of moisture evaporation. Microwave power densities ranged from 25 to 78 kW/m3, microwave energy consumption from 365 to 760 kWh/m3. Internal wood temperatures up to 140 °C were used. Internal vapour pressure in the wood could rise to about 20 kPa without checking. Maximal drying rates of 0.20 to 0.45% moisture content per minute are possible to obtain when drying above fiber saturation (fsp). Below fsp the feasible drying rates ranged from 0.10 to 0.20% moisture content per minute. Spruce dried approximately 1.6 times faster than pine. No conditioning of the wood was necessary since the wood was free of stresses. The wood was free of checks but colour changes occured in the interior of some specimens.