Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
Sintering behavior, microstructure and properties of TiC-FeCr hard alloy
Institute of Powder Metallurgy, School of Materials Science and Engineering, University of Science and Technology, Beijing.ORCID iD: 0000-0003-4888-6237
Institute of Powder Metallurgy, School of Materials Science and Engineering, University of Science and Technology, Beijing.
Institute of Powder Metallurgy, School of Materials Science and Engineering, University of Science and Technology, Beijing.
Institute of Powder Metallurgy, School of Materials Science and Engineering, University of Science and Technology, Beijing.
2007 (English)In: Journal of University of Science and Technology Beijing, Mineral, Metallurgy, Material, Vol. 14, no 1, p. 89-93Article in journal (Refereed) Published
Abstract [en]

TiC based cermets were produced with FeCr, as a binder, by conventional P/M (powder metallurgy) to near >97% of the theoretical density. Sintering temperature significantly affects the mechanical properties of the composite. The sintering temperature of >1360°C caused severe chemical reaction between TiC particles and the binder phase. In the TiC-FeCr cermets, the mechanical properties did not vary linearly with the carbide content. Optimum mechanical properties were found in the composite containing 57wt% TiC reinforcement, when sintered at 1360°C for 1 h. Use of carbon as an additive enhanced the mechanical properties of the composites. Cermets containing carbon as an additive with 49wt% TiC exhibited attractive mechanical properties. The microstructure of the developed composite contained less or no debonding, representing good wettability of the binder with TiC particles. Homogeneous distribution of the TiC particles ensured the presence of isotropic mechanical properties and homogeneous distribution of stresses in the composite. Preliminary experiments for evaluation of the oxidation resistance of FeCr bonded TiC cermets indicate that they are more resistant than WC-Co hardmetals

Place, publisher, year, edition, pages
2007. Vol. 14, no 1, p. 89-93
National Category
Other Materials Engineering
Research subject
Engineering Materials
Identifiers
URN: urn:nbn:se:ltu:diva-8961DOI: 10.1016/S1005-8850(07)60018-8Local ID: 78523d24-a0cf-4cd7-91ac-c05bd34d0e56OAI: oai:DiVA.org:ltu-8961DiVA, id: diva2:981899
Note
Upprättat; 2007; 20150416 (farakh)Available from: 2016-09-29 Created: 2016-09-29 Last updated: 2017-11-24Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full text

Authority records BETA

Akhtar, Farid

Search in DiVA

By author/editor
Akhtar, Farid
Other Materials Engineering

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 103 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf