Change search
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf
A 3D in-situ investigation of the deformation in compressive loading in the thickness direction of cellulose fiber mats
Department of Engineering Sciences, Uppsala University.
ABB Corporate Research, 721 78, Västerås.
Luleå University of Technology, Department of Engineering Sciences and Mathematics, Fluid and Experimental Mechanics.ORCID iD: 0000-0001-7395-3302
ABB Corporate Research, 721 78, Västerås.
Show others and affiliations
2015 (English)In: Cellulose (London), ISSN 0969-0239, E-ISSN 1572-882X, Vol. 22, no 5, p. 2993-3001Article in journal (Refereed) Published
Abstract [en]

Fiber mat materials based on cellulose natural fibers combines a useful set of properties, including renewability, stiffness, strength and dielectric insulation, etc. The dominant in-plane fiber orientation ensures the in-plane performance, at the expense of reduced out-of-plane behavior, which has not been studied as extensively as the in-plane behavior. Quantitative use of X-ray micro-computed tomography and strain analyses under in-situ loading open up possibilities to identify key mechanisms responsible for deformation. In the present investigation, focus is placed on the out-of-plane deformation under compressive loading of thick, high density paper, known as pressboard. The samples were compressed in the chamber of a microtomographic scanner. 3D images were captured before and after the loading the sample. From sequential 3D images, the strain field inside the material was calculated using digital volume correlation. Two different test pieces were tested, namely unpolished and surface polished ones. The first principal strain component of the strain tensor showed a significant correlation with the density variation in the material, in particular on the top and bottom surfaces of unpolished samples. The manufacturing-induced grooves generate inhomogeneities in the microstructure of the surface, thus creating high strain concentration zones which give a sensible contribution to the overall compliance of the unpolished material. More generally, the results reveal that, on the micrometer scale, high density fiber pressboard behaves as a porous material rather than a low density fiber network.

Place, publisher, year, edition, pages
2015. Vol. 22, no 5, p. 2993-3001
National Category
Applied Mechanics
Research subject
Experimental Mechanics
Identifiers
URN: urn:nbn:se:ltu:diva-13682DOI: 10.1007/s10570-015-0727-7ISI: 000361002000011Scopus ID: 2-s2.0-84941414539Local ID: cf3a80ef-5a68-44c8-aa28-3ff20395ee67OAI: oai:DiVA.org:ltu-13682DiVA, id: diva2:986635
Note
Validerad; 2015; Nivå 2; 20150819 (andbra)Available from: 2016-09-29 Created: 2016-09-29 Last updated: 2018-07-10Bibliographically approved

Open Access in DiVA

No full text in DiVA

Other links

Publisher's full textScopus

Authority records BETA

Forsberg, FredrikSjödahl, Mikael

Search in DiVA

By author/editor
Forsberg, FredrikSjödahl, Mikael
By organisation
Fluid and Experimental Mechanics
In the same journal
Cellulose (London)
Applied Mechanics

Search outside of DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetric score

doi
urn-nbn
Total: 474 hits
CiteExportLink to record
Permanent link

Direct link
Cite
Citation style
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Other style
More styles
Language
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Other locale
More languages
Output format
  • html
  • text
  • asciidoc
  • rtf