Change search
Link to record
Permanent link

Direct link
Publications (10 of 32) Show all publications
Long, W., Wang, S., Zou, Y. & Wu, Q. (2027). Effects of curing time and thickness of Thin spray-on liner (TSL) on rock dynamic spalling Resistance: Experimental and Numerical investigation. Tunnelling and Underground Space Technology, 179(part 1), Article ID 108086.
Open this publication in new window or tab >>Effects of curing time and thickness of Thin spray-on liner (TSL) on rock dynamic spalling Resistance: Experimental and Numerical investigation
2027 (English)In: Tunnelling and Underground Space Technology, ISSN 0886-7798, E-ISSN 1878-4364, Vol. 179, no part 1, article id 108086Article in journal (Refereed) Published
Place, publisher, year, edition, pages
Elsevier, 2027
Keywords
Thin Spray-on Liner (TSL), Dynamic spalling, Curing time, Mechanical properties, Numerical simulation
National Category
Mechanical Engineering Materials Engineering
Research subject
Mining and Rock Engineering
Identifiers
urn:nbn:se:ltu:diva-119594 (URN)10.1016/j.tust.2026.108086 (DOI)001865576500001 ()2-s2.0-105048871667 (Scopus ID)
Available from: 2026-09-01 Created: 2026-09-01 Last updated: 2026-11-12Bibliographically approved
Luo, W., Zhang, P., Li, C. C. & Zou, Y. (2027). Numerical investigation of repurposing oil storage caverns for hydrogen storage using lined rock cavern (LRC) technology. Tunnelling and Underground Space Technology, 179, Article ID 108096.
Open this publication in new window or tab >>Numerical investigation of repurposing oil storage caverns for hydrogen storage using lined rock cavern (LRC) technology
2027 (English)In: Tunnelling and Underground Space Technology, ISSN 0886-7798, E-ISSN 1878-4364, Vol. 179, article id 108096Article in journal (Refereed) Published
Abstract [en]

The growing demand for large-scale geological hydrogen storage has driven the exploration of resource-efficient methods for repurposing existing underground infrastructure. This study assesses the technical feasibility of converting underground oil storage caverns into lined rock caverns (LRCs) for hydrogen storage and evaluates the material costs associated with two proposed design schemes. Two retrofit schemes were analyzed numerically using parameters derived from an existing LRC demonstration project. The ultimate and maximum operating gas pressures were determined using the uplift failure model, considering cavern burial depth and the mechanical properties of the surrounding rock mass. Structural responses under pressurization were evaluated, followed by a comparative assessment of concrete and steel liner costs. The results indicate that dividing the original cavern into multiple lined sub-caverns separated by concrete pillars improves structural performance and reduces the maximum tensile stress in the steel liner, although tensile-stress concentrations may develop in the concrete pillars. Meanwhile, the proposed Single-cavern scheme offers significantly higher hydrogen storage capacity with lower concrete requirements but a larger steel liner area. A supplementary short-term cyclic thermo-mechanical analysis revealed response-dependent differences from the corresponding static analysis. The static analysis overestimated the maximum tensile stress in the steel liner and the plastic-zone volume in the concrete liner, while underestimating the plastic-zone volumes in the rock-mass and total system. These findings highlight the importance of cyclic thermo-mechanical effects on LRC response while supporting the applicability of static analysis as a preliminary assessment approach, provided that an adequate safety margin is adopted when determining the maximum operating gas pressure. Additionally, in both schemes, the tensile-stress level in the steel liner remains low, suggesting significant potential for liner optimization in material selection and liner thickness. Overall, the results indicate that repurposing oil storage caverns as LRCs is a technically feasible retrofit option, while overall economic feasibility should be further evaluated through life-cycle cost analysis.

Place, publisher, year, edition, pages
Elsevier, 2027
Keywords
Lined rock cavern (LRC), Oil storage cavern, Uplift failure, Numerical investigation, Cost analysis
National Category
Geotechnical Engineering and Engineering Geology
Research subject
Mining and Rock Engineering; Centre - Center for Hydrogen Energy Systems Sweden (CH2ESS)
Identifiers
urn:nbn:se:ltu:diva-119676 (URN)10.1016/j.tust.2026.108096 (DOI)001871419100001 ()2-s2.0-105049379482 (Scopus ID)
Funder
Nordic Council of Ministers, 2315912-0611
Note

Full text license: CC BY 4.0;

Available from: 2026-09-07 Created: 2026-09-07 Last updated: 2026-11-12Bibliographically approved
Ju, M., Zhu, H., Yu, L., Zou, Y., Peng, X., Dou, L., . . . Li, X. (2026). Confining pressure effects on mining-induced unloading failure characteristics along a rough fault: Experimental and numerical investigations. International Journal of Rock Mechanics And Mining Sciences, 198, Article ID 106356.
Open this publication in new window or tab >>Confining pressure effects on mining-induced unloading failure characteristics along a rough fault: Experimental and numerical investigations
Show others...
2026 (English)In: International Journal of Rock Mechanics And Mining Sciences, ISSN 1365-1609, E-ISSN 1873-4545, Vol. 198, article id 106356Article in journal (Refereed) Published
Place, publisher, year, edition, pages
Elsevier, 2026
Keywords
Deep mining, Fault slip, Unloading instability, Fault roughness, Confining pressure, Dynamic hazard
National Category
Other Mechanical Engineering
Research subject
Mining and Rock Engineering
Identifiers
urn:nbn:se:ltu:diva-115861 (URN)10.1016/j.ijrmms.2025.106356 (DOI)001645533900001 ()2-s2.0-105025013703 (Scopus ID)
Note

For funding information, see: https://doi.org/10.1016/j.ijrmms.2025.106356

Available from: 2025-12-22 Created: 2025-12-22 Last updated: 2026-06-30Bibliographically approved
Liu, C., Li, Q., Rui, F., Yin, T., Zou, Y. & Zhao, G. (2026). Coupled numerical modelling of high-voltage electric pulse (HVEP) rock fracturing using COMSOL and 4D-LSM. International Journal of Mining Science and Technology, 36(3), 517-533
Open this publication in new window or tab >>Coupled numerical modelling of high-voltage electric pulse (HVEP) rock fracturing using COMSOL and 4D-LSM
Show others...
2026 (English)In: International Journal of Mining Science and Technology, ISSN 2095-2686, Vol. 36, no 3, p. 517-533Article in journal (Refereed) Published
Abstract [en]

High-voltage electric pulse (HVEP) rock fragmentation has demonstrated substantial potential for sustainable fracturing of hard rocks owing to its energy efficiency. The transient nature and highly disruptive characteristics of its physical fracturing process render experimental investigation of the underlying rock-breaking mechanisms challenging. However, existing numerical studies lack comprehensive models that precisely link electrical breakdown phenomena with mechanical disintegration processes. This study combines COMSOL electrical breakdown simulations with four-dimension lattice spring model (4D-LSM) mechanical analysis to establish a coupled HVEP rock fragmentation model. The core concept of the model construction is to import the temperature field of the plasma channel obtained from the electrical breakdown into the mechanical solver to realize the precise connection between the two stages. The validated numerical model elucidates the full process of HVEP-induced fragmentation under varying electrical parameters. Furthermore, the effects of confining pressure and mineral grain size on fragmentation behavior have been investigated. Finally, parametric simulations across 25 electrical parameter combinations demonstrate the critical role of electrode spacing optimization in achieving energy-efficient rock fragmentation. These findings provide a predictive tool for designing efficient HVEP systems in deep resource extraction and mineral processing engineering.

Place, publisher, year, edition, pages
Elsevier, 2026
Keywords
Rock fracturing, High-voltage electric pulse, Thermal-mechanical coupling, Lattice spring model
National Category
Other Civil Engineering
Research subject
Mining and Rock Engineering
Identifiers
urn:nbn:se:ltu:diva-115909 (URN)10.1016/j.ijmst.2025.12.014 (DOI)001722953800001 ()2-s2.0-105029878265 (Scopus ID)
Note

Funder: National Natural Science Foundation of China (52209144, 12472405);

Full text license: CC BY-NC-ND

Available from: 2026-01-09 Created: 2026-01-09 Last updated: 2026-08-27Bibliographically approved
Li, Z., Wang, Y., Fan, J., Zou, Y., Chen, J., Jiang, D. & Nelias, D. (2026). Deformation of surrounding rocks in salt caverns in compressed air energy storage plants: Insights from laboratory experiments and numerical simulations. Tunnelling and Underground Space Technology, 170, Article ID 107335.
Open this publication in new window or tab >>Deformation of surrounding rocks in salt caverns in compressed air energy storage plants: Insights from laboratory experiments and numerical simulations
Show others...
2026 (English)In: Tunnelling and Underground Space Technology, ISSN 0886-7798, E-ISSN 1878-4364, Vol. 170, article id 107335Article in journal (Refereed) Published
Abstract [en]

The long-term mechanical stability of surrounding rock in compressed air energy storage (CAES) salt caverns is crucial for the safe and efficient operation of underground energy systems. In this study, the deformation behavior of salt rock was investigated through a combined approach that involved long-term laboratory creep–fatigue tests and engineering-scale numerical simulations. Mechanical experiments were carried out at various cyclic stress levels and loading rates to replicate the creep–fatigue loading conditions that are encountered during CAES operations. The results indicate that both the magnitude and the frequency of cyclic loading significantly influence the time-dependent deformation of salt rock: higher stress levels accelerate damage, whereas lower loading rates lead to increased plastic strain. On the basis of the geological conditions of a planned CAES facility, numerical simulations were conducted using FLAC3D. The model incorporates the Norton creep law to simulate the evolution of the surrounding rock with different numbers of operational cycles and gas pressures. The operating pressure and frequency significantly affect the deformation and plastic zone distribution of the surrounding rock in salt cavern reservoirs. Higher operational frequencies and minimum gas pressures result in reduced deformation and improved cavern stability. For the first time, a direct qualitative analysis was conducted to compare the laboratory experiments and numerical simulation results. Comparative analysis reveals that the experimental and simulation results are generally consistent. These findings offer new insights into the mechanical response of salt cavern-surrounding rock and establish a foundation for predicting the long-term performance of CAES systems.

Place, publisher, year, edition, pages
Elsevier, 2026
Keywords
Salt rock, Compressed air energy storage, Creep fatigue, Laboratory experiment, Numerical simulation
National Category
Geotechnical Engineering and Engineering Geology
Research subject
Mining and Rock Engineering
Identifiers
urn:nbn:se:ltu:diva-115791 (URN)10.1016/j.tust.2025.107335 (DOI)001637456500001 ()2-s2.0-105023955902 (Scopus ID)
Note

Full text license: CC BY 4.0;

Funder: Rut and Sten Brand foundation; National Natural Science Fund of China (52274073); Chongqing Youth Innovative Talent Project (CSTB2024NSCQ-QCXMX0022);  Chongqing Natural Science Foundation Innovation and Development Joint Fund (CSTB2024NSCQ-LZX0056); Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety (SKLGGES-024006)

Available from: 2025-12-12 Created: 2025-12-12 Last updated: 2026-06-30Bibliographically approved
Bai, Y., Wang, S., Li, L., Zou, Y., Wu, Q., Zhou, J. & Li, C. (2026). Effect of thin spray-on liner curing time on dynamic spallation behaviors of circular tunnels: Experimental and DEM simulation. Engineering Fracture Mechanics, 338, Article ID 112058.
Open this publication in new window or tab >>Effect of thin spray-on liner curing time on dynamic spallation behaviors of circular tunnels: Experimental and DEM simulation
Show others...
2026 (English)In: Engineering Fracture Mechanics, ISSN 0013-7944, E-ISSN 1873-7315, Vol. 338, article id 112058Article in journal (Refereed) Published
Place, publisher, year, edition, pages
Elsevier, 2026
Keywords
Thin spray-on layer (TSL), Curing time, Dynamic loading, Spallation failure, PFC2D simulation
National Category
Mechanical Engineering Materials Engineering
Research subject
Mining and Rock Engineering
Identifiers
urn:nbn:se:ltu:diva-116808 (URN)10.1016/j.engfracmech.2026.112058 (DOI)001721710600001 ()2-s2.0-105033225395 (Scopus ID)
Note

Funder: National Natural Science Foundation of China (Grant Nos. 52374089 and Nos.52374082);

Available from: 2026-03-19 Created: 2026-03-19 Last updated: 2026-06-30Bibliographically approved
Lundvall, L., Burvall, N., Li, Z., Luo, W., Fan, J., Ju, M. & Zou, Y. (2026). Effects of excavation geometry in energy evolution in underground mines. Geohazard Mechanics, 4(1), 10-20
Open this publication in new window or tab >>Effects of excavation geometry in energy evolution in underground mines
Show others...
2026 (English)In: Geohazard Mechanics, ISSN 2949-7418, Vol. 4, no 1, p. 10-20Article in journal (Refereed) Published
Abstract [en]

With mines reaching into greater depth, problems with violent failures become more prevalent, such as rockbursts. To assess the potential for such occurrences, understanding energy dynamics is crucial. This study delves into the impact of excavation shape, aspect ratios, inclined angles and in-situ stress on dissipated plastic energy and released kinetic energy through numerical simulations. Detailed analyses of plastic zone around rectangular and elliptical excavations, varying in aspect ratios, unveiled the distinct patterns of tensile and shear plastic zone. Quantitative assessments of dissipated plastic energy and released kinetic energy highlighted contrasting behaviors between rectangular and elliptical excavations across various aspect ratios. Although the relationships between these energies and excavation parameters are found to be intricate, it becomes evident that: with an increase in the aspect ratio, both shear and tensile plastic zones exhibit a growing trend, and their distribution shows a high degree of consistency with regions of energy concentration. When the aspect ratio is below 1.5, elliptical excavations release slightly less kinetic energy than rectangular ones. Beyond 1.5, this relationship reverses. Moreover, upon exploring inclined angles, critical angles were identified, delineating points where the influence of aspect ratio nearly diminishes. Under the given in-situ stress conditions, approximately 50° and 20° serve as the critical angles for dissipated plastic energy and released kinetic energy, respectively. Changes in the degree of in-situ stress anisotropy have a limited impact on the overall energy trends but significantly alter the critical values of aspect ratio and inclination angle. When the in-situ stress ratio matches the excavation aspect ratio, both forms of energy reach their minimum values. These findings illuminate the complex interplay between excavation geometry and energy dissipation, offering invaluable insights for designing effective excavations and devising strategies to mitigate failures.

Place, publisher, year, edition, pages
Elsevier, 2026
Keywords
Excavation geometry, Energy evolution, Underground mines, Rockburst
National Category
Other Civil Engineering
Research subject
Mining and Rock Engineering
Identifiers
urn:nbn:se:ltu:diva-115910 (URN)10.1016/j.ghm.2026.01.001 (DOI)2-s2.0-105031314433 (Scopus ID)
Note

Funder: State Key Laboratory of Coal Mine Disaster Dynamics and Control in China (2011DA105287-FW202409); State Key Laboratory of Intelligent Construction and Healthy Operation and Maintenance of Deep Underground Engineering in China (SDGZ2503); Rut and Sten Brand foundation

Available from: 2026-01-09 Created: 2026-01-09 Last updated: 2026-03-25
Li, Z., Fan, J., Kang, Y., Zou, Y., Fourmeau, M., Chen, J., . . . Nelias, D. (2026). Experimental study on the permeability characteristics of reconsolidated salt: Effects of gas and confining pressure. International Journal of Rock Mechanics And Mining Sciences, 199, Article ID 106424.
Open this publication in new window or tab >>Experimental study on the permeability characteristics of reconsolidated salt: Effects of gas and confining pressure
Show others...
2026 (English)In: International Journal of Rock Mechanics And Mining Sciences, ISSN 1365-1609, E-ISSN 1873-4545, Vol. 199, article id 106424Article in journal (Refereed) Published
Abstract [en]

Reconsolidated salt, formed from crushed halite under compaction, is a promising buffer and sealing material for deep geological repositories of high-level radioactive waste (HLW) because of its low permeability and self-healing properties. This study investigated the gas permeability behavior of reconsolidated salt with varying porosities under different confining pressures and inlet gas pressures using nitrogen gas. Based on nuclear magnetic resonance (NMR) technology, the pore structure of reconsolidated salt specimens with different porosities was tested and imaged. The experimental results demonstrate that gas permeability decreases with increasing gas and confining pressures, with gas pressure having a more pronounced effect. The observed permeability‒pressure relationship is attributed primarily to the Klinkenberg effect, with gas slippage along pore walls enhancing the measured permeability under low-pressure conditions. Using the Klinkenberg correction, the absolute permeability values of reconsolidated salt were derived, reaching as low as 10−19 m2 in low-porosity samples. These values are significantly lower than the apparent gas permeability, indicating excellent sealing performance comparable to or superior to that of bentonite. A logarithmic relationship between the absolute permeability and confining pressure was established, providing a quantitative basis for permeability prediction under repository stress conditions. NMR imaging results indicate that with decreasing porosity, the connectivity between pores also gradually diminishes. Additionally, the slip factor was found to increase with increasing confining pressure, underscoring the evolving influence of pore geometry on gas transport mechanisms. Permeability of reconsolidated granular salt decreases with porosity following a power-law relationship, and the healing supports its sealing effectiveness. This study provides essential data and theoretical insights for evaluating the long-term sealing performance of reconsolidated salt in salt-based HLW repositories.

Place, publisher, year, edition, pages
Elsevier, 2026
Keywords
Reconsolidated salt, Gas permeability, Klinkenberg effect, High-level radioactive waste disposal, Shaft sealing materials
National Category
Geotechnical Engineering and Engineering Geology
Research subject
Mining and Rock Engineering
Identifiers
urn:nbn:se:ltu:diva-116188 (URN)10.1016/j.ijrmms.2026.106424 (DOI)001678337200001 ()2-s2.0-105028276342 (Scopus ID)
Note

Full text license: CC BY 4.0;

Funder: Rut and Sten Brand foundation; Chongqing Youth Innovative Talent Project (CSTB2024NSCQ-QCXMX0011); National Natural Science Fund of China (No. 52274073); National Key R&D Program of China (2024YFB4007100); China Postdoctoral Science Foundation (2023M730427); Chongqing Postdoctoral Research Project (2023CQBSHTB3139); Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety (SKLGGES-024006)  

Available from: 2026-01-27 Created: 2026-01-27 Last updated: 2026-06-30Bibliographically approved
Liu, S., Zhang, Z., Li, Z., Fan, J., Zou, Y. & Nelias, D. (2026). Fiber-Reinforced Roadside Backfill Body for Gob-Side Entry Retaining: Fracture Resistance, Damage Evolution, and Field Performance. Rock Mechanics and Rock Engineering
Open this publication in new window or tab >>Fiber-Reinforced Roadside Backfill Body for Gob-Side Entry Retaining: Fracture Resistance, Damage Evolution, and Field Performance
Show others...
2026 (English)In: Rock Mechanics and Rock Engineering, ISSN 0723-2632, E-ISSN 1434-453XArticle in journal (Refereed) Epub ahead of print
Abstract [en]

Traditional roadside backfill bodies made of high-water-content material (TRBBs) are commonly adopted in gob-side entry retaining (GER). However, their brittle response often results in crack propagation, loss of load-carrying capacity, and instability under roof rotation and mining-induced stress. This study investigates the fracture-resistance mechanism, damage evolution, and field performance of a fiber-reinforced roadside backfill body (FRBB). A fracture-mechanics-based model was developed to quantify the toughening effects of fiber bridging and fiber pull-out, and Mode I fracture toughness was measured using semi-circular bending tests. The optimum polypropylene fiber dosage was 0.3%, at which fracture toughness increased from 0.130 to 0.210 MPa·m0.5, a 61.5% enhancement relative to the plain matrix. A 3DEC model incorporating strain-softening behavior, staged material-parameter updating, and joint energy-based damage indicators was used to simulate the response of the surrounding rock and FRBB deterioration. The simulations show that stress concentration and damage mainly occur 30–80 m behind the working face, where fiber reinforcement retards crack interaction and improves damage tolerance. Parametric analyses indicate that greater GER width and longer key block B reduce stability, whereas a thicker immediate roof and larger FRBB width improve structural performance. The proposed analytic hierarchy process (AHP)–matter–element extension model showed that the GER stability grade improved from IV in the TRBB case to III in the FRBB case. Field monitoring showed roof-to-floor and rib-to-rib convergence values of 490 mm and 370 mm, respectively, with only slight FRBB surface microcracking. These findings provide a mechanical basis for designing GER systems with FRBB.

Place, publisher, year, edition, pages
Springer, 2026
Keywords
Gob-side entry retaining, Fiber-reinforced roadside backfill body, Fracture resistance, Damage evolution, Stability control
National Category
Geotechnical Engineering and Engineering Geology Other Civil Engineering
Research subject
Mining and Rock Engineering
Identifiers
urn:nbn:se:ltu:diva-119203 (URN)10.1007/s00603-026-05834-z (DOI)001832634000001 ()2-s2.0-105046205777 (Scopus ID)
Note

Funder: National Natural Science Foundation of China (52504083); the Natural Science Foundation of Hunan Provincial China (2025JJ60363); State Key Laboratory of Coal Mine Disaster Dynamics and Control (2011DA105287-FW202409); Rut and Sten Brand foundation;

Available from: 2026-08-11 Created: 2026-08-11 Last updated: 2026-08-11Bibliographically approved
Cheng, R., Ju, M., Yu, L., Zou, Y., Ji, H., Zhang, B., . . . Li, X. (2026). Mechanism of Pre-tensioned Bolt for Strainburst Mitigation: Insights from the Regulation of Stress/Energy Fields and Fracture Pattern. Rock Mechanics and Rock Engineering
Open this publication in new window or tab >>Mechanism of Pre-tensioned Bolt for Strainburst Mitigation: Insights from the Regulation of Stress/Energy Fields and Fracture Pattern
Show others...
2026 (English)In: Rock Mechanics and Rock Engineering, ISSN 0723-2632, E-ISSN 1434-453XArticle in journal (Refereed) Epub ahead of print
Abstract [en]

Bolt support represents a widely adopted technique for controlling strainbursts in underground excavations. Clarifying the mitigation mechanism of pre-tensioned bolts against strainburst is essential for rational support design. This study investigates the control mechanism of pre-tensioned bolts on strainburst through integrated theoretical, experimental, and numerical approaches. Results demonstrate that pre-tension force significantly increases both coal bursting threshold stress and fracture characteristic stress, with both parameters growing logarithmically with higher pre-tension. Pre-tension also significantly reduces ejected debris mass, surface damage ratio, seismicity density, and crack dimensions. Moment tensor inversion quantifies the regulatory role of pre-tension in suppressing tensile fracture propagation. Pre-tensioned bolt improves elastic strain energy density in the surrounding rock by expanding the spatial envelope and magnitude of the support stress field, creating an energy barrier effect. They lower elastic strain energy release rate (ESERR), thereby reducing coal bursting proneness and intensity. This energy regulation exhibits spatial heterogeneity: along the bolt axis from the free to anchorage section, ESERR remains consistently below 0.065 J m⁻3 s⁻1, reflecting minimal dynamic activity. Radially outward within the coal rib, ESERR increases sharply (peaking at 0.99 J m⁻3 s⁻1) due to shortened dynamic fracture duration as support stress attenuates, which locally intensifies strainburst severity. This study systematically clarifies the mitigation mechanism of pre-tensioned bolt against strainburst, contributing to the understanding of strainburst control in deep underground engineering.

Place, publisher, year, edition, pages
Springer, 2026
Keywords
Strainburst, Pre-tensioned bolt, moment tensor inversion, Support stress filed, Elastic strain energy
National Category
Mechanical Engineering
Research subject
Mining and Rock Engineering
Identifiers
urn:nbn:se:ltu:diva-118522 (URN)10.1007/s00603-026-05637-2 (DOI)001784172200001 ()2-s2.0-105040986362 (Scopus ID)
Note

For funding, see link: https://link.springer.com/article/10.1007/s00603-026-05637-2#Fun

Available from: 2026-06-18 Created: 2026-06-18 Last updated: 2026-06-18Bibliographically approved
Organisations
Identifiers
ORCID iD: ORCID iD iconorcid.org/0000-0002-1198-0927

Search in DiVA

Show all publications