Change search
Link to record
Permanent link

Direct link
Publications (6 of 6) Show all publications
Shaukat, R. A., Rehman, M. M., Khan, M., Chang, R., Iorio, C. S., Samad, Y. A. & Shi, Y. (2026). Triboelectric Nanogenerators for Future Space Missions. Nano-Micro Letters, 18(1), Article ID 98.
Open this publication in new window or tab >>Triboelectric Nanogenerators for Future Space Missions
Show others...
2026 (English)In: Nano-Micro Letters, ISSN 2150-5551, Vol. 18, no 1, article id 98Article, review/survey (Refereed) Published
Abstract [en]

Space exploration is significant for scientific innovation, resource utilization, and planetary security. Space exploration involves several systems including satellites, space suits, communication systems, and robotics, which have to function under harsh space conditions such as extreme temperatures (− 270 to 1650 °C), microgravity (10⁻⁶ g), unhealthy humidity (< 20% RH or > 60% RH), high atmospheric pressure (~ 1450 psi), and radiation (4000–5000 mSv). Conventional energy-harvesting technologies (solar cells, fuel cells, and nuclear energy), that are normally used to power these space systems have certain limitations (e.g., sunlight dependence, weight, degradation, big size, high cost, low capacity, radioactivity, complexity, and low efficiency). The constraints in conventional energy resources have made it imperative to look for non-conventional yet efficient alternatives. A great potential for enhancing efficiency, sustainability, and mission duration in space exploration can be offered by integrating triboelectric nanogenerators (TENGs) with existing energy sources. Recently, the potential of TENG including energy harvesting (from vibrations/movements in satellites and spacecraft), self-powered sensing, and microgravity, for multiple applications in different space missions has been discussed. This review comprehensively covers the use of TENGs for various space applications, such as planetary exploration missions (Mars environment monitoring), manned space equipment, In-orbit robotic operations /collision monitoring, spacecraft's design and structural health monitoring, Aeronautical systems, and conventional energy harvesting (solar and nuclear). This review also discusses the use of self-powered TENG sensors for deep space object perception. At the same time, this review compares TENGs with conventional energy harvesting technologies for space systems. Lastly, this review talks about energy harvesting in satellites, TENG-based satellite communication systems, and future practical implementation challenges (with possible solutions).

Place, publisher, year, edition, pages
Springer Science and Business Media B.V., 2026
Keywords
Triboelectric nanogenerators (TENGs), Space missions, Sustainable energy harvesting, Harsh space conditions, Self- powered sensors, Satellite missions
National Category
Other Mechanical Engineering
Research subject
Machine Elements
Identifiers
urn:nbn:se:ltu:diva-115955 (URN)10.1007/s40820-025-01944-5 (DOI)001653295800004 ()41484663 (PubMedID)2-s2.0-105026343615 (Scopus ID)
Funder
Swedish Research Council, 2023-04962
Note

Full text: CC BY license;

Available from: 2026-01-13 Created: 2026-01-13 Last updated: 2026-06-30Bibliographically approved
Wei, Y., Shaukat, R. A., Villaos, R., Wu, Z., Huang, L., Larsson, J. A., . . . Shi, Y. (2026). Turning moisture into a benefit: Chitosan-reinforced pSBMA/pAAc hydrogel for wear-resistant, humidity-enhanced and anti-biofouling TENG. Chemical Engineering Journal, 531, Article ID 174308.
Open this publication in new window or tab >>Turning moisture into a benefit: Chitosan-reinforced pSBMA/pAAc hydrogel for wear-resistant, humidity-enhanced and anti-biofouling TENG
Show others...
2026 (English)In: Chemical Engineering Journal, ISSN 1385-8947, E-ISSN 1873-3212, Vol. 531, article id 174308Article in journal (Refereed) Published
Abstract [en]

Triboelectric nanogenerators (TENGs) suffer from charge leakage under humid environments. In particular, marine/biomedical interfaces indicate that biofouling may present a critical challenge such as protein adsorption and microbial adhesion that distort interfacial electrostatics, accelerate charge dissipation and trigger progressive failure of output performance. To address these coupled challenges, we developed a chitosan-reinforced poly(sulfobetaine methacrylate-co-acrylic acid) (pSBMA/pAAc) hydrogel that integrates anti-biofouling ability, wear resistance, and humidity-enhanced electrical output. The interpenetrating polymer network (IPN) couples a pSBMA/pAAc copolymer that forms a tightly bound hydration layer with a crosslinked chitosan network that reinforces mechanical strength, suppresses swelling, and provides strong interfacial adhesion. The resulting hydrogel exhibits ultralow protein adsorption (4.9 μg/cm2), high adhesion strength (325 kPa), and superior wear resistance. Additionally, TENG device fabricated from the hydrogel (tribo-positive layer) and FEP (tribo-negative layer) delivers a humidity-enhanced output voltage increasing from 16 V to 30 V as relative humidity (RH) increases from 28% to 80%. The proposed hydrogel transforms moisture from a detrimental factor into an active performance enhancer. Finally, density functional theory (DFT) calculations reveal the microscopic origin of this humidity-enhanced behavior of the TENG device. Hence, this materials-level strategy integrates passive anti-biofouling with humidity-enhanced charge transfer, enabling robust TENG operation for energy harvesting and sensing in moist and biofouling-prone environments.

Place, publisher, year, edition, pages
Elsevier, 2026
Keywords
Humidity-enhanced TENGs, Anti-biofouling, Wear-resistant, Chitosan-reinforced hydrogels, DFT analysis
National Category
Other Mechanical Engineering
Research subject
Machine Elements; Applied Physics
Identifiers
urn:nbn:se:ltu:diva-116516 (URN)10.1016/j.cej.2026.174308 (DOI)001698436400001 ()2-s2.0-105030279110 (Scopus ID)
Funder
Swedish Research Council, 2023- 04962, 2023-03894, 2022-06725Knut and Alice Wallenberg FoundationThe Kempe FoundationsWallenberg Initiative Materials Science for Sustainability (WISE)
Note

Full text license: CC BY 4.0

Available from: 2026-02-20 Created: 2026-02-20 Last updated: 2026-06-30Bibliographically approved
Rehman, M. M., Samad, Y. A., Gul, J. Z., Saqib, M., Khan, M., Shaukat, R. A., . . . Kim, W. Y. (2025). 2D materials-memristive devices nexus: From status quo to Impending applications. Progress in Materials Science, 152, Article ID 101471.
Open this publication in new window or tab >>2D materials-memristive devices nexus: From status quo to Impending applications
Show others...
2025 (English)In: Progress in Materials Science, ISSN 0079-6425, E-ISSN 1873-2208, Vol. 152, article id 101471Article, review/survey (Refereed) Published
Abstract [en]

The incorporation of 2D materials into memristive devices has boosted advancements in non-volatile memory (NVM), and other related applications including brain inspired neuromorphic systems, artificial intelligence (AI)-machine learning (ML), optoelectronics, photonics, implementing arithmetic operations, and hybrid CMOS architectures. These advancements have taken place among limitations on silicon-based flash and surging data demands, stimulating the research of innovative materials and architectures, particularly for the next generation memory devices. This comprehensive review expands upon the cutting-edge developments in 2D material-based memristors, including their fabrication techniques, performance evaluation, fundamental properties, diverse applications, further challenges in their modernization, and future road map. By emphasizing the distinct characteristics of 2D materials, we reviewed their memristive behavior and highlighted the major contributions by leading researchers over the years. Focus of this review is on the incorporation of graphene (derivatives of graphene), transition metal dichalcogenides (TMDs), and other 2D materials (like MXenes and nanocomposites) in various memristive architectures. The review paper systematically explored the specific roles of graphene and other 2D materials in memristor devices including their use as electrodes, active layers, barrier layers, interfacial layers, and tunnel layers. The major challenges faced by the 2D material based memristor technology hindering their advancement have been critically reviewed including the scalability, yield, hardware implementation, performance enhancement, fabrication techniques, material/device engineering, and commercialization of these devices. Workable solutions to those problems along with the clear and comprehensive road map of future directions for addressing these hurdles have been recommended to unlock the full potential of this transitional technology. This review provides an authoritative resource and compelling rationale for researchers working towards metamorphic memristor solutions by emphasizing the imperative role of 2D materials.

Place, publisher, year, edition, pages
Elsevier Ltd, 2025
Keywords
Memristors, Graphene and its Derivatives, 2D Nanomaterials and MXenes, Diverse Memristor Applications, Key Challenges, Future Directions
National Category
Materials Chemistry
Research subject
Machine Elements
Identifiers
urn:nbn:se:ltu:diva-111912 (URN)10.1016/j.pmatsci.2025.101471 (DOI)001436797000001 ()2-s2.0-85218504923 (Scopus ID)
Note

Validerad;2025;Nivå 2;2025-03-13 (u8);

Funder: Ministry of Science; ICT (NRF-2020H1D3A1A04081545);

Full text license: CC BY

Available from: 2025-03-13 Created: 2025-03-13 Last updated: 2025-10-21Bibliographically approved
Yousaf, H. M., Javed, M., Bashir, M. M., Shaukat, R. A. & Mahmood, H. (2025). Highly Stable and Temperature-Independent Humidity Sensor Based on PEO/PVA Polymer Composite. Journal of Composites Science, 9(2), Article ID 85.
Open this publication in new window or tab >>Highly Stable and Temperature-Independent Humidity Sensor Based on PEO/PVA Polymer Composite
Show others...
2025 (English)In: Journal of Composites Science, E-ISSN 2504-477X, Vol. 9, no 2, article id 85Article in journal (Refereed) Published
Abstract [en]

Traditional humidity sensors frequently face challenges, especially in environments with fluctuating temperatures, which can compromise their efficiency, stability, and reliability. Therefore, there is an urgent demand to fabricate low-cost and high-performance temperature-independent humidity sensors. In this work, for the first time, highly stable and reliable temperature-independent humidity sensors have been proposed based on a PEO/PVA polymer composite. Four sensors were fabricated containing weight ratios of PEO/PVA as 50:50%, 40:60%, 60:40%, and 70:30%, respectively. All of the fabricated sensors were electrically characterized at three different temperatures, 30 °C, 35 °C, and 40 °C, to investigate the impedance response. The proposed sensor based on a PEO/PVA (40:60%) composite presents a remarkable and optimized temperature-independent performance in the range of 0–60%RH. Apart from this, the response and recovery time (9 s/16 s) of the temperature-independent humidity sensor based on PEO/PVA (40:60%) were investigated. Finally, the sensor showed long-term stability for 90 days, ensuring the reliability of the proposed device. These remarkable performances of the proposed sensor based on PEO/PVA with a weight ratio of (40:60)% can open a new gateway for low-range temperature-independent humidity sensors for various real-time applications.

Place, publisher, year, edition, pages
Multidisciplinary Digital Publishing Institute (MDPI), 2025
Keywords
temperature compensation, humidity sensor, stable, polyvinyl alcohol (PVA) and polyethylene oxide (PEO)
National Category
Chemical Sciences Electrical Engineering, Electronic Engineering, Information Engineering
Research subject
Machine Elements
Identifiers
urn:nbn:se:ltu:diva-111914 (URN)10.3390/jcs9020085 (DOI)001430027200001 ()2-s2.0-85218683076 (Scopus ID)
Note

Validerad;2025;Nivå 1;2025-03-13 (u8);

Full text license: CC BY

Available from: 2025-03-13 Created: 2025-03-13 Last updated: 2025-10-21Bibliographically approved
Son, J., Tamim, A. M., Kim, H., Jeon, S. H., Shaukat, R. A., Song, M., . . . Jeong, C. K. (2025). Suction-forced triboelectricity escalation by incorporating biomimetic 3-dimensional surface architectures. Nano Energy, 133, Article ID 110480.
Open this publication in new window or tab >>Suction-forced triboelectricity escalation by incorporating biomimetic 3-dimensional surface architectures
Show others...
2025 (English)In: Nano Energy, ISSN 2211-2855, E-ISSN 2211-3282, Vol. 133, article id 110480Article in journal (Refereed) Published
Abstract [en]

Triboelectric nanogenerators (TENGs), which operate on the principles of electrostatic induction and triboelectrification, have emerged as highly promising devices for energy harvesting, offering vast potential to address the challenges of energy depletion. In this study, we present a hierarchical bio-inspired architecture designed to enhance the triboelectric effect through a physically adhesive mechanism, achieved by creating a highly deformable 3D microstructure. This three-dimensional (3D) architecture, inspired by the male diving beetle, features properties that increase the contact area and compressibility of the interface by forming conformal contact with the electrode surface in both dry and wet environments. The architecture enhances van der Waals forces and generates multiple physical adhesion forces at the interface, leading to significant charge transfer. Compared to flat surfaces as well as various 3D bio-inspired architectures such as linear-shaped pillars and mushroom-like architectures, diving beetle inspired architecture demonstrated the highest triboelectric performance, generating voltage (∼42 V) and current (∼1008 nA) in dry conditions at 16 N of force. The results of this study offer a new perspective, demonstrating that triboelectricity can be efficiently generated through the strategic design of physically adhesive structures, as opposed to conventional TENGs that rely on structureless designs or chemical adhesives.

Place, publisher, year, edition, pages
Elsevier, 2025
Keywords
3D architectures, Physical-adhesive, Micropatterning, Charge transfers, Triboelectric nanogenerators
National Category
Condensed Matter Physics
Research subject
Machine Elements
Identifiers
urn:nbn:se:ltu:diva-110801 (URN)10.1016/j.nanoen.2024.110480 (DOI)001363092300001 ()2-s2.0-85209350249 (Scopus ID)
Note

Validerad;2024;Nivå 2;2024-11-26 (signyg);

Funder: the Ministry of Science, ICT and Future Planning (MSIT) (2022R1A2C4002037; 2022R1A4A3032923); the MSIT (RS-2023-00304743); the Korea government MSIT (No. CRC230231-000); Ministry of Trade, Industry & Energy (MOTIE, Korea)

Available from: 2024-11-26 Created: 2024-11-26 Last updated: 2025-10-21Bibliographically approved
Shaukat, R. A., Cha, A., Tamim, A. M., Kim, H., Hwang, G.-T., Lee, H. E., . . . Jeong, C. K. (2025). Zeolite-Decorated Triboelectric Sensors for Heavy Metal Contaminant Detection. ACS Applied Electronic Materials, 7(8), 3439-3447
Open this publication in new window or tab >>Zeolite-Decorated Triboelectric Sensors for Heavy Metal Contaminant Detection
Show others...
2025 (English)In: ACS Applied Electronic Materials, E-ISSN 2637-6113, Vol. 7, no 8, p. 3439-3447Article in journal (Refereed) Published
Abstract [en]

Environmental contamination by heavy metals has become a major health threat, exacerbated by rapid industrialization, thereby creating an urgent demand for highly efficient and sensitive detection devices. In this study, we introduce a highly sensitive triboelectric nanosensor (TENS) based on β-zeolite for multianalytic detection of heavy metal ions. β-Zeolite was spin-coated onto an indium tin oxide (ITO)-coated glass substrate, serving as the tribo-positive layer, while PDMS acted as the tribo-negative layer for self-powered triboelectric sensing signals. The fabricated triboelectric sensor was characterized by an open-circuit voltage of 18.3 V, short-circuit current of 306 nA, and a maximum power density of 602 nW cm–2 at a resistance of 6 MΩ. Notably, the TENS demonstrated excellent sensitivity in detecting Cd2+ (0.3302 ppm–1) and Hg2+ (0.216 ppm–1) within a detection range of 0.01 to 50 ppm, as well as high selectivity for Cd2+, Hg2+, and Pb2+ ions apart from alkali ions. This straightforward and cost-effective approach to fabricating highly sensitive and selective β-zeolite-based TENSs presents a promising pathway for advancing heavy metal-contaminant detection technologies.

Place, publisher, year, edition, pages
American Chemical Society, 2025
Keywords
β-zeolites, heavy metals ions, triboelectric, energy harvesting, nanogenerators, self-powered sensors
National Category
Condensed Matter Physics
Research subject
Machine Elements
Identifiers
urn:nbn:se:ltu:diva-112384 (URN)10.1021/acsaelm.5c00136 (DOI)001460231800001 ()2-s2.0-105003590108 (Scopus ID)
Note

Validerad;2025;Nivå 2;2025-06-27 (u5);

Funder: Jeonbuk National University

Available from: 2025-04-14 Created: 2025-04-14 Last updated: 2026-01-23Bibliographically approved
Organisations
Identifiers
ORCID iD: ORCID iD iconorcid.org/0000-0003-1822-2077

Search in DiVA

Show all publications